QUOIZEL WLN1611MBKW Weldin LED 11 Inch Matte Black White Flush Mount Ceiling Light Installation Guide
- October 30, 2023
- QUOIZEL
Table of Contents
QUOIZEL WLN1611MBKW Weldin LED 11 Inch Matte Black White Flush Mount
Ceiling Light
Product Information
The WLN1611MBKW, WLN1611MBKG, WLN1615MBKW, and WLN1615MBKG are models of light fixtures rated for 120Vac and 60Hz. The wattage for WLN1611MBKW and WLN1611MBKG is 16W, while the wattage for WLN1615MBKW and WLN1615MBKG is 30W.
Product Usage Instructions
- Remove the shade from the fixture body.
- Install the mounting screws to the crossbar. Determine the mounting holes for the mounting screws and install them. Do not screw all the mounting screws in the crossbar. Leave a minimum length of 5/8 for the next installations.
- Install the crossbar.
- Install wall anchors. Drill holes for wall anchors from marks. Install wall anchors into drilled holes. Mark anchor hole locations on the ceiling.
- Wire the fixture. Connect the white wire from the supply to the white wire from the fixture. Connect the black (or red) wire from the supply to the black wire from the fixture. Connect the ground wire from the supply to the ground wire from the fixture. Connect the green ground wire.
- Hang the fixture body to the mounting screws.
- Install screws. Tighten all screws, including mounting screws.
- Install shade back to fixture body.
- Restore electricity and save this sheet for future reference.
If you need further assistance, call Quoizel Customer Care at 1-800-645-3184 (9:00 am – 5:00 pm EST) or visit them online at www.quoizel.com. To maintain the product, refer to the care and maintenance instructions provided in the manual.
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, install or operate the product.
Ratings
| 120Vac, 60Hz
---|---
Model No.| Wattage
WLN1611MBKW| 16W
WLN1611MBKG| 16W
WLN1615MBKW| 30W
WLN1615MBKG| 30W
WARNING
- RISK OF ELECTRIC SHOCK – Before beginning installation, turn off electricity at the circuit breaker box or the main fuse box.
CAUTION
- For your safety, read instructions completely before beginning installation.
- If in doubt about electrical installation, consult a licensed electrician.
TOOLS REQUIRED
CARE AND MAINTENANCE
- Wipe clean using soft, dry cloth or static duster. Always avoid using harsh chemicals and abrasives to clean fixture as they may damage the finish.
If you need further assistance call Quoizel Customer Care at 1-800-645-3184 (9:00am – 5:00pm EST), or visit us on-line at www.quoizel.com.
PACKAGE CONTENTS
MOUNTING HARDWARE
INSTALLATION
Your installation is now complete! Restore electricity and save this sheet for future reference.