QUOIZEL WLN1611MBKW Weldin LED Flush Mount Ceiling Light Installation Guide
- October 30, 2023
- QUOIZEL
Table of Contents
- QUOIZEL WLN1611MBKW Weldin LED Flush Mount Ceiling Light
- Product Information
- Product Usage Instructions
- SAFETY INFORMATION
- Technical Specifications
- TOOLS REQUIRED
- CARE AND MAINTENANCE
- PACKAGE CONTENTS
- MOUNTING HARDWARE
- INSTALLATION
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
QUOIZEL WLN1611MBKW Weldin LED Flush Mount Ceiling Light
Product Information
The installation guide is for four different models of the product, namely WLN1611MBKW, WLN1611MBKG, WLN1615MBKW, and WLN1615MBKG. The product has a wattage of 16W or 30W and is rated for 120Vac, 60Hz. The package contains a fixture body, a crossbar, wire connectors, mounting screws, wall anchors, and screws.
Product Usage Instructions
- Remove the shade from the fixture body.
- Install the mounting screws to the crossbar by determining the mounting holes for mounting screws and then installing the screws. Do not screw all the mounting screws in the crossbar; leave a minimum length of 5/8 for next installations.
- Install the crossbar by fitting slot holes to mounting screws and rotating the fixture body until it is hung on mounting screws safely.
- Install wall anchors by drilling holes for wall anchors from marks and then installing wall anchors into drilled holes. Mark anchor hole locations on the ceiling.
- Wire the product by connecting the white wire from the supply to the white wire from the fixture and connecting the black (or red) wire from the supply to the black wire from the fixture. Connect the ground wire from the supply to the ground wire from the fixture using the green ground wire.
- Hang the fixture body to mounting screws.
- Install screws and tighten all screws, including mounting screws.
- Install shade back to fixture body.
After completing installation, restore electricity and keep this sheet for future reference. If you need further assistance, call Quoizel Customer Care at 1-800-645-3184 (9:00am – 5:00pm EST) or visit www.quoizel.com.
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, install or operate the product.
WARNING: RISK OF ELECTRIC SHOCK – Before beginning installation, turn off electricity at the circuit breaker box or the main fuse box.
CAUTION
- For your safety, read instructions completely before beginning installation.
- If in doubt about electrical installation, consult a licensed electrician.
Technical Specifications
| Ratings | 120Vac, 60Hz |
|---|---|
| Model No. | Wattage |
| WLN1611MBKW | 16W |
| WLN1611MBKG | 16W |
| WLN1615MBKW | 30W |
| WLN1615MBKG | 30W |
TOOLS REQUIRED
CARE AND MAINTENANCE
- Wipe clean using soft, dry cloth or static duster. Always avoid using harsh chemicals and abrasives to clean fixture as they may damage the finish.
- If you need further assistance call Quoizel Customer Care at 1-800-645-3184 (9:00am – 5:00pm EST), or visit us online at www.quoizel.com.
PACKAGE CONTENTS
MOUNTING HARDWARE
INSTALLATION
Remove Shade From Fixture Body
Install Mounting Screws to Crossbar
Install Crossbar
Install Wall Anchors
Wiring
Hang Fixture Body to Mounting Screws
Install Screws
Install Shade Back to Fixture Body
Your installation is now complete! Restore electricity and save this sheet for future reference.