QUOIZEL LWS7970E2 Sumpter 4 Light Matte Black Farmhouse Damp Rated Chandelier User Guide

QUOIZEL LWS7970E2 Sumpter 4 Light Matte Black Farmhouse Damp Rated

Chandelier

Product Information

Specifications

• Model: QUOIZEL Product
• Customer Service: 1-844-564-3055, cs@quoizel.com
• Package Contents:
  • Crossbar Assembly x1
  • Wire Connector x3
  • Outlet Box Screw x2
  • Quick Link x4
  • Ceiling Canopy x1
  • Fixture Chain x2
  • Fixture Loop x2
  • Fixture x1
  • Large Ring x1
  • Ring x1

Product Usage Instructions

1. Pull the supply wires and ground wire up through the fixture chain alternating links.
2. Push the ends of the supply wires and ground wire up through the canopy loop and into the outlet box. The remaining slack wire will be pushed into the ceiling canopy.
3. Connect the black or red wire (hot) from the outlet box.

Care and Maintenance

Bulbs will not light

Possible Cause: 1. Replace the light bulb.

FAQ

• Q: What should I do if the bulbs do not light up?
• A: The possible cause could be a faulty light bulb. Try replacing the light bulb and check if the issue persists.

Thank you for purchasing this QUOIZEL product.
If you have any questions or problems, please call our customer service department, 8:30 a.m. – 5:00 p.m., EST, Monday – Thursday, 10:20 a.m. – 5:00 p.m., EST, Friday.
For the quickest response, please visit Quoizel.com and click on Contact Us.

SAFETY INFORMATION

• Please read and understand this entire manual before attempting to assemble, operate or install the product.

WARNING

• RISK OF ELECTRIC SHOCK – Before beginning installation, turn off electricity at the circuit breaker box or the main fuse box.
• RISK OF FIRE – Use bulbs specified by the markings and/or labels on the fixture.

CAUTION

• For your safety, read the instructions completely before beginning installation.
• If in doubt about electrical installation, consult a licensed electrician.
• Turn off the electricity to the fixture before replacing the bulb(s).

PREPARATION

• Before beginning assembly of a product, make sure all parts are present. Compare parts with the package contents list and hardware contents list.
• If any part is missing or damaged, do not attempt to assemble the product.

LIGHT SOURCE

• 4 BULBS REQUIRED (SOLD SEPARATELY)
• Please check with bulb manufacturer for dimming capabilities.

BULB COMPARISON

TOOLS REQUIRED

PACKAGE CONTENTS

PART| DESCRIPTION| QUANTITY

| Stock Part# ****

---|---|---|---

A

| Crossbar Assembly

Ensemble

| 1pc|

914987KIT

B

| Wire Connector| 3pcs

C

| Outlet Box Screw

Tornillo para

|

2pcs

D

| Quick Link Maillon rapide

|

4pcs

E

| Ceiling Canopy

|

1pc

|

N/A

F

| Fixture Chain|

2pcs

|

M381CHTMBK

G

| Fixture loop|

2pcs

|

N/A

H

| Fixture|

1pc

I

| Large Ring Grande|

1pc

J

| Ring|

1pc

Installation Instructions

If the ceiling canopy is not snug against the ceiling, remove it from the crossbar assembly. Adjust the length of the pre-assembled nipple by unscrewing the pre-assembled hex nut. Screw the nipple in or out of the crossbar until the correct length is achieved. Then, re-attach the ceiling canopy.

• A: Adjust fixture chain length.
• B: Install fixture chain.

• A: Pull the supply wires and ground wire up through the fixture chain alternating links.
• B: Push the ends of the supply wires and ground wire up through the canopy loop and into the outlet box. The remaining slack wire will be pushed into the ceiling canopy.

• Trim excess fixture wire leaving a minimum of 6 inches hanging out of the outlet box.
• Separate the smooth side and ribbed side of the supply wire.
• Using wire strippers, strip each wire 1/2 inch from the end.

CARE AND MAINTENANCE

• Wipe clean using soft, dry cloth or static duster.
• Always avoid using harsh chemicals and abrasives to clean fixtures as they may damage the finish.

TROUBLESHOOTING

PROBLEM

• Bulbs will not light.
• The fuse blows or the circuit breaker trips when the light is turned on.

POSSIBLE CAUSE

1. The bulb is burned out.
2. The power is off.
3. Faulty wire connection.
4. Faulty switch.

Crossed wires or power wire is grounded out.

CORRECTIVE ACTION

1. Replace the light bulb.
2. Make sure the power supply is on.
3. Check wiring.
4. Test or replace the switch.

Check the wire connection.

CONTACT

• 8:30 a.m. – 5:00 p.m., EST, Monday – Thursday, 10:20 a.m. – 5:00 p.m., EST, Friday.
• For the quickest response, please visit Quoizel.com and click on Contact Us.
• 1-844-564-3055
• E-mail:cs@quoizel.com

References

• Quoizel | Artisans In Lighting

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>