QUOIZEL LWS7804F Renford 4 Light Matte Black Transitional Drum Hanging Pendant Light User Guide

QUOIZEL LWS7804F Renford 4 Light Matte Black Transitional Drum Hanging

Pendant Light

Product Specifications

• Model: QUOIZEL Product
• Customer Service: 1-844-564-3055, Mon-Thu: 8:30 a.m. – 5:00 p.m. EST, Fri: 10:20 a.m. – 5:00 p.m. EST
• Package Contents:
  • Crossbar Assembly – 1pc
  • Wire Connector – 3pcs
  • Outlet Box Screw – 2pcs
  • Quick Link – 2pcs
  • Ceiling Canopy – 1pc
  • Fixture Chain – 1pc
  • Fixture Loop Assembly – 1pc
  • Nut – 1pc
  • Square Ring Assembly – 1pc
  • Socket Assembly – 1pc
  • Decorative Part – 2pcs

Product Usage Instructions

Assembly Steps:

1. Adjust fixture chain length by following steps A-D.
2. Loop the supply wires and ground wire through the fixture chain alternating links.
3. Push the wires through the loop and into the outlet box.
4. Insert the remaining slack wire into the outlet box.

Care and Maintenance:
Possible Cause: Replace light bulb.

FAQ (Frequently Asked Questions)

• Q: How do I adjust the fixture chain length?
  A: Follow steps A-D provided in the user manual to adjust the fixture chain length.

• Q: What should I do if I have a missing part in the package contents?
  A: Please contact our customer service department at 1-844-564-3055 or email cs@quoizel.com for assistance.

ITEM ARTICLE # 5336495
MODEL # LWS7804F

Thank you for purchasing this QUOIZEL product.
If you have any questions or problems, please call our customer service department, 8:30 a.m. – 5:00 p.m., EST, Monday – Thursday, 10:20 a.m. – 5:00 p.m., EST, Friday. For the quickest response, please visit Quoizel.com and click on Contact Us.
1-844-564-3055
E-mail :cs@quoizel.com

SAFETY INFORMATION

Please read and understand this entire manual before attempting to assemble, operate or install the product

WARNING

• RISK OF ELECTRIC SHOCK – Before beginning installation, turn off electricity at the circuit breaker box or the main fuse box.
• RISK OF FIRE – Use bulbs specified by the markings and/or labels on the fixture.

CAUTION

• For your safety, read the instructions completely before beginning installation.
• If in doubt about electrical installation, consult a licensed electrician.
• Turn off the electricity to the fixture before replacing the bulb(s).

PREPARATION

• Before beginning assembly of the product, make sure all parts are present. Compare parts with package contents list and hardware contents list
• If any part is missing or damaged, do not attempt to assemble the product.

LIGHT SOURCE

• 4 BULBS REQUIRED (SOLD SEPARATELY)
• • Please check with bulb manufacturer for dimming capabilities.

TOOLS REQUIRED

PACKAGE CONTENTS

A

| Crossbar Assembly Ensemble de traverse

| 1pc| ****

915739KIT

B

| Wire Connector| 3pcs

C

| Outlet Box Screw Vis pour boîte de sortie| ****

2pcs

D

| Quick Link Maillon rapide| ****

2pcs

E

| Ceiling Canopy| ****

1pc

F

| Fixture Chain| ****

1pc

| ****

M381CHTMBK

G

| Fixture Loop Assembly| ****

1pc

| ****

N/A

H

| Nut Écrou Tuerca| ****

1pc

I

| Square Ring Assembly| ****

1pc

J

| Socket Assembly| ****

1pc

K

| Decorative Part| ****

2pcs

Instructions

• D – If the ceiling canopy is not snug against the ceiling, remove it from the crossbar assembly. Adjust the length of the pre-assembled nipple by unscrewing the pre-assembled hex nut. Screw the nipple in or out of the crossbar until the correct length is achieved. Then, re-attach the ceiling canopy.

• A – Pull the supply wires and ground wire up through the fixture chain alternating links.

• B – Push the ends of the supply wires and ground wire up through the loop and into the outlet box.

• C – Remove the canopy.

• D – Insert the remaining slack wire into the outlet box.

• Trim excess fixture wire leaving a minimum of 6 inches hanging out of the outlet box.

• Separate the smooth side and ribbed side of the supply wire.

• Using wire strippers, strip each wire 1/2 inch from the end.

CARE AND MAINTENANCE

• Wipe clean using a soft, dry cloth or static duster. Always avoid using harsh chemicals and abrasives to clean fixtures as they may damage the finish.

TROUBLESHOOTING

PROBLEM| POSSIBLE CAUSE| CORRECTIVE ACTION|
---|---|---|---
The lights will not turn on.| 1.  Bulb is burned out.

2.  Power is off.

3.  Faulty wire connection.

4.  Faulty switch.

| 1.  Replace light bulb.

2.  Make sure the power supply is on.

3.  Check wiring.

4.  Test or replace the switch.

|
The fuse blows or the circuit breaker trips when the light is turned on.|
Crossed wires or power wire is grounded out.|
Check the wire connection.|

MADE IN CHINA

References

• Quoizel | Artisans In Lighting

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>