baby trend TS15XXXA Passport Seasons All Terrain Travel System Instruction Manual

baby trend TS15XXXA Passport Seasons All Terrain Travel System

Specifications:

• Product Name: Passport Seasons All-Terrain Travel System with
  EZ-LiftTM PLUS infant car seat

• Manufacturer: Baby Trend, Inc.

• Address: 13048 Valley Blvd. Fontana CA 92335

• Contact: 1-800-328-7363 (8:00 a.m. ~ 4:30 p.m. PST), www.babytrend.com

Product Usage Instructions

Set Up the Stroller Frame
Unlock and release the fold latch by pulling it outward. Unfold the stroller frame by pulling upward on the stroller handle to lock the frame.

Front Wheel
If assembly is required, insert the front wheel peg into the front stroller hub. Push the wheel in firmly until it clicks into position. Undo latch to swivel if needed.

Rear Axle
The rear wheels MUST be installed prior to use. Align the rear wheel to the rear stroller hub and push it in firmly until it clicks into position. Repeat for the other side.

Rear Brakes
Always set brakes when the stroller is not being pushed to prevent rolling away. Engage and release the brake levers by pressing down to engage and lifting up to release. Check that brakes are applied properly. Ensure all wheels are securely attached before use. Never use the stroller if wheels do not lock into place. If you need assistance, please contact our customer service department at 1-800-328-7363, Monday-Friday, between 8:00 a.m. and 4:30 p.m. PST or visit www.babytrend.com /contact-us.

Frequently Asked Questions (FAQ):

1. Q: Can I jog or run with this stroller?
   A: No, it is recommended to NEVER run or jog with this stroller for safety reasons.

2. Q: What should I do if any parts are missing or broken?
   A: Before assembly and each use, inspect the product for damaged hardware, loose joints, missing parts, or sharp edges. NEVER use if any parts are missing or broken. Contact customer service for assistance.

3. Q: How do I engage and release the rear brakes?
   A: Press down on the brake levers to engage and lift up to release. Ensure proper application of brakes before using the stroller.

WARRANTY
DO NOT RETURN YOUR PRODUCT TO THE STORE. PLEASE CONTACT BABY TREND® FOR REPLACEMENT PARTS, SERVICE AND REPAIR.
The Baby Trend® warranty covers workmanship defects within 1 year of purchase. Any product which has been subjected to misuse, abuse, abnormal use, excessive wear and tear, improper assembly, negligence, environmental exposure, alteration or accident, or has had its serial number altered or removed invalidates all claims against the manufacturer. Any damage to property during installation is the sole responsibility of the end user. Customer Service Department can be contacted at 1 800-328-7363 Monday through Friday between 8:00 a.m. and 4:30 p.m. (PST). Return Authorizations are required prior to returning product(s) to Baby Trend®. Please visit http://babytrend.com/pages/limited-warranty for complete warranty details.
Baby Trend, Inc. 13048 Valley Blvd. Fontana CA 92335
1-800-328-7363 • (8:00am ~ 4:30pm PST)
www.babytrend.com

PARTS

• Check that you have all the parts for this model before assembling the stroller.

• Stroller and Canopy

• Mobile Phone Positioning Parent Tray

• Child Tray

• Front Wheel

• Rear Wheels (X2)

• Base

• Infant Car Seat

• Wheels style may vary.

• Please refer to the manual located under the car seat for base type and instructions.

WARNING

WARNING: Please follow all of these instructions to ensure the safety of your child. Keep these instructions for future reference. NEVER run or jog with this stroller.

• Failure to follow these instructions could result in serious injury or death. Avoid serious injury from falling or sliding out, always use the safety harness and ensure that the children are properly positioned according to these instructions.
• Never leave children unattended.
• Care must be taken when folding and unfolding the stroller to prevent finger entrapment.

CAUTION: Do not allow children near stroller while folding and unfolding.
WARNING: Wheel can detach and cause tip over. Pull on the wheel to assure it is securely attached.
WARNING: Care must be taken when folding stroller to prevent damage. Make sure all accessories, mobile phones, diaper bags or purses are removed before folding. Failure to remove items in, or on the stroller so may result in damage to the stroller or the item(s) if not removed. Baby Trend® will not be liable or warrant any damage.
CAUTION: This single stroller is designed for one child only. Use with more than one child may cause the unbalance condition which can injure/harm your child.

• Purses, shopping bags, parcels, diaper bags or accessory items may change the balance of the stroller and cause a hazardous, unstable condition.
• The maximum weight that can be carried in the storage basket is 5 pounds (2.27kg). Excessive weight may cause a hazardous unstable condition to exist.
• The maximum weight that can be carried in the child tray is 3 pounds (1.36 kg).
• The maximum weight that can be carried in the parent tray is 3 pounds (1.36 kg).
• Be certain the stroller is completely opened and locked in place before allowing a child near the stroller.
• The child occupant must not exceed 50 lb (22.67 kg) or over 42 inches (106.7 cm) tall when used with the maximum weight on the child tray, parent tray and basket. Do not exceed 60 lb (27.21 kg) including the weight used in the accessories. Use of the stroller and attached car seat with a total weight more than 60 lb (27.21 kg) will cause excessive wear and stress on the stroller and may cause a hazardous unstable condition to exist.
• ALWAYS refer to the manual located under the car seat for car seat weight limitations.
• NEVER use the stroller on stairways or escalators.
• NEVER use the stroller with roller skates, in-line skates, skateboards or bicycles.
• NEVER allow your stroller to be used as a toy.

IMPORTANT !
To ensure safe operation of your product, please follow these instructions carefully. Please keep these instructions for future reference.

• Before assembly and each use, inspect this product for damaged hardware, loose joints, missing parts or sharp edges. NEVER use if any parts are missing or broken.
• Adult assembly is required. Keep child away during unpacking and assembly.

SET UP THE STROLLER FRAME

Unlock
Release the fold latch by pulling it outward .

Unfold stroller frame by pulling upward on the stroller handle to lock the frame.

FRONT WHEEL
Place the front wheel
If assembly required, insert the front wheel peg into the front stroller hub Push the wheel in firmly until it clicks into position .

NOTE: Undo latch to swivel.

REAR AXLE
Place the rear wheels
The rear wheels MUST be installed prior to use. Align the rear wheel to the rear stroller hub (Fig. 3a) Push the wheel in firmly until it clicks into position (Fig. 3b), and repeat for the other side.

REAR BRAKES
WARNING: Always set brakes when the stroller is not being pushed so that the stroller will not roll away. NEVER leave stroller unattended on a hill or incline as the stroller may slide down the hill.

Engage and release
Press down the brake levers to engage and lift up on the brake levers to release. Stroller may require forward/rearward movement to engage the brake. Check that brakes applied properly.

NOTE: Pull on the front and rear wheels to ensure all are securely attached to the stroller. NEVER use stroller if wheels do not lock into place. If you need assistance, please contact our customer service department at 1-800-328-7363, Monday-Friday, between 8:00 a.m. and 4:30 p.m. PST. www.babytrend.com/contact- us

MOBILE PHONE POSITIONING PARENT TRAY

WARNING: Do not place hot liquids or more than 3 lb (1.36 kg) in the parent tray. Serious burns or unstable conditions can result.

• Care must be taken when folding stroller to prevent damage. Make sure all accessories, mobile phones, diaper bags or purses are removed before folding. Failure to remove items in, or on the stroller may result in damage to the stroller or the item (s) if not removed. Baby Trend® will not be liable or warrant any damage.

Before attaching the tray

1. Face the tray with the prominent arch side towards the canopy. Locate the three canopy straps and seat strap .

2. Flip tray over with slots facing towards the seat and canopy (Fig. 5b).
   NOTE: First thread the middle canopy strap through the slot. Second insert the middle seat strap through the slot .

3. Insert the remaining straps into the tray slots (Fig. 5c).

4. Pull back each strap to the catch the hole into each pertaining tray tab (Fig. 5d).

5. Flip the tray over and align the parent tray tabs to the inner tabs on both sides of the stroller. Press the tray down firmly until both tabs click into position . NOTE: Ensure all fabric panels are attached to their corresponding tab as illustrated. To secure canopy: hook elastic strap fasteners on each side of the stroller frame .

Fabric Straps Reference

CHILD TRAY

WARNING: The child’s tray is not a restraint device: always secure your child with the seat harness. DO NOT lift the stroller by the child’s tray. Use care when child is in the stroller and securing the front tray. Do not place hot liquids or more than 3 pounds (1.36 kg) in the child tray. Serious burns or unstable conditions could result.
To attach the child tray Push the tray downward into the connectors .

Check
that the tray is securely latched in place.

To access the child seat
Push one release and lift up the tray simultaneously .

Either side of the child tray will lift and rotate out of the way to allow access to the front seat.

To remove the child tray
Push to release both ends and lift up the tray simultaneously.

STORAGE BASKET

Secure and access
Check Straps: If received unattached, follow below instructions to attach. Ensure that all straps with snap closures and basket straps are attached correctly.
NOTE: Always secure straps as shown in.

Basket Access / Flip-Up Leg Rest: Lift the leg rest to access the storage basket from the front side .

NOTE: Lift leg rest from the edge, and always close the storage basket front access when not in use and apply the snap closure.

AIR FLOW FEATURE

Padding removal
Unhook the shoulder straps to pass them through the padding (Fig. 8a). Roll the padding neatly to apply the hook and loop fastener, located on the top of the seat pad.

Reverse to close the air flow feature .

NOTE: For harness straps instructions see Step 9.

HIDE THE BACK PADDING

Trifold through opening
NOTE: Ensure the button strap behind the stroller is unsnapped and unhooked from the loop.
To roll up flat and compact, feed the side sections through the top center opening .

Feed the padding through the opening gap as shown .

Then pull the padding out and unfold from behind the stroller.

Remove trifold to finish
Fold the padding tightly by rolling it upward.

1. Use the button strap to hook and loop.
2. Snap the button when finished.
   To undo, reverse the steps above.

SECURING THE SEAT FABRIC

Check all attachments If received unattached, follow below instructions to attach: Feed the rear recline clip and the seat fabric through the appropiate bracket and slots on the stroller frame sides .

Check all attachments If received unattached, follow below instructions to attach: Ensure all safety straps underneath rear seat are secured through the appropiate slots .

SECURE THE CHILD
SAFETY
WARNING: Avoid serious injury from falling or sliding out. Always use the safety harness.

STRANGULATION HAZARD:
Child can strangle in loose safety harness. Never leave child in seat when safety harness is loose or undone.

5-point harness
The shoulder straps of the 5-point harness have multiple positions. Select the position that places the shoulder strap level with, or below the top of the child’s shoulder .

To secure the child, place the safety harness around the child’s waist and over the shoulders. Place the crotch strap between the child’s legs. Insert the male end of each shoulder/waist belt into the buckle on the crotch strap. Tighten all buckles to the proper fit for the child .

Adjust for a snug fit

Strap Adjustments
Adjust the harness from the rear of the seat. Grip the anchored buckles and pass them through the slots and subsequently pull the straps out from the seat.

Feed the anchor buckles into the appropriate slots on the stroller and fabric padding .

RELEASE!
Push button on center clasp, the two harness buckles will release .

Center Clasp

SEATBACK POSITIONING
Recline and Upright adjustment
To recline the seat press the clip ends together to release and pull down. To place seat into an upright position, press the clip ends together while holding the end of strap. Push clip upwards to secure into desired position.

NOTE: The upright position should be used only for a child that is at least 6 months old. Always re-adjust the safety harness, including the shoulder belts, when repositioning the seatback.

THE INFANT CAR SEAT

WARNING: Avoid serious injury from falling or sliding out, always use the Infant Car Seat harness.
ATTENTION: CS01 EZ-Lift, CS02 EZ-Lift PLUS and CS03 EZ-Lift PRO
Infant Car Seats must attach to the module of the strollers front seat. These models require child tray and seat back adjustment to the most reclined position. Align the car seat module to the inner frame connectors. Carefully rest the car seats lower rear against the angle point of the tray. Latch the module into the stroller frame. Press down firmly for the click. ALWAYS ensure that the car seat is properly connected and locked onto the stroller before each use by lifting up on the car seat handle .

ALWAYS use short clip to secure the infant car seat to the stroller.
NOTE: To make seat position adjustments refer to step 10.

Removing the car seat:
NOTE: Set handle to the carry position .

Squeeze the release handle located at the Top-rear of the car seat and lift away from the stroller .

TO FOLD STROLLER

WARNING: Care must be taken when folding and unfolding the stroller to prevent finger entrapment.

• Care must be taken when folding stroller to prevent damage. Make sure all accessories, mobile phones, diaper bags or purses are removed before folding. Failure to remove items in, or on the stroller so may result in damage to the stroller or the item(s) if not removed. Baby Trend® will not be liable or warrant any damage.

CAUTION: Do not allow children near stroller while folding.

Stroller – Foldind Strap
Locate the strap in the seat pocket. Using one hand pull the strap firmly upward to unlock the frame .

Holding the strap lift the stroller frame until it fully closes ..

Compress stroller and secure with fold latch.

Always tuck the pull strap back into the seat fabric .

NOTE: You may remove the tray for a compact fold. Refer to Step 6.

TO UNFOLD STROLLER
CAUTION:
Do not allow children near stroller while unfolding.

Stroller – Fold Latch
Unlock the fold latch.

and unfold stroller frame by pulling upward on the stroller handle until the frame locks .

Refer to the child
tray instruction as needed for removing or adjusting the tray.

FRONT AND REAR WHEEL RELEASE

MAINTENANCE
If replacing the front wheel:
Locate the release pin on the front of the wheel hub. Push in the release pin and pull the wheel out .

Re-Install:
insert the front wheel peg into the front stroller hub Push the wheel in firmly until it clicks into position .

NOTE: Release pin on right if wheel is positioned as shown in .

CARE AND MAINTENANCE
SEAT PAD
To clean the seat pad, use only mild household soap or detergent and warm water on a sponge or clean cloth.

OTHER
Check your stroller for loose screws, worn parts, torn material or stitching on a regular basis. Replace or repair parts as needed.

BABY TREND® CUSTOMER SERVICE
The Customer Service Department can be contacted at 1 800-328-7363 Monday through Friday between 8:00 a.m. and 4:30 p.m. (PST). Return Authorizations are required prior to returning product(s) to Baby Trend®.
Copyright © 2024, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.

References

• Limited Warranty Coverage – Baby Trend
• Baby Trend® | Car Seats, Strollers, High Chairs, Nursery and More!
• Contact Us – Baby Trend

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>