QUOIZEL LWS6412B 5 Light Pendant User Guide
- June 17, 2024
- QUOIZEL
Table of Contents
QUOIZEL LWS6412B 5 Light Pendant
Product Information
Specifications
- Brand : QUOIZEL
- Customer Service : 1-844-564-3055 | cs@quoizel.com
- Package Contents
- Crossbar Assembly – 1pc
- Wire Connector – 3pcs
- Outlet Box Screw – 2pcs
- Quick Link – 2pcs
- Ceiling Canopy – 1pc
- Fixture Chain – 1pc
- Fixture Loop – 1pc
- Socket Assembly – 1pc
- Ring A – 2pcs
- Ring B – 2pcs
Product Usage Instructions
Assembly
Follow the steps provided in the manual to assemble the fixture components.
Fixture Chain Length Adjustment
- Pull the supply wires and ground wire through the fixture chain alternating links.
- Push the ends of the wires up through the loop and into the outlet box.
- Remove the canopy.
- Insert any remaining slack wire into the outlet box.
Installation
Install the assembled fixture according to the installation instructions
provided.
Care and Maintenance
Regularly check and clean the fixture to ensure proper functioning and
longevity.
FAQs (Frequently Asked Questions)
Q: What should I do if the light bulb needs replacement?
A: Replace the light bulb following the instructions provided in the
manual.
ITEM ARTICLE # 5336491
MODEL MODÈLE # LWS6412B
USE AND CARE GUIDE
5-LIGHT PENDANT
Thank you for purchasing this QUOIZEL product.
If you have any questions or problems, please call our customer service
department, 8:30 a.m. – 5:00 p.m., EST, Monday – Thursday, 10:20 a.m. – 5:00
p.m., EST, Friday.
For the quickest response, please visit Quoizel.com and click on Contact Us.
1-844-564-3055
E-mail : cs@quoizel.com
SAFETY INFORMATION
Please read and understand this entire manual before attempting to
assemble, operate or install the product.
WARNING
- RISK OF ELECTRIC SHOCK – Before beginning installation, turn off electricity at the circuit breaker box or the main fuse box.
- RISK OF FIRE – Use bulbs specified by the markings and/or labels on the fixture.
CAUTION
- For your safety, read instructions completely before beginning installation.
- If in doubt about electrical installation, consult a licensed electrician.
- Turn off electricity to fixture before replacing the bulb(s).
PREPARATION
Before beginning assembly of product, make sure all parts are present.
Compare parts with package contents list and hardware contents list. If any
part is missing or damaged, do not attempt to assemble the product.
LIGHT SOURCE
5 BULBS REQUIRED (SOLD SEPARATELY)
Please check with bulb manufacturer for dimming capabilities.
TOOLS REQUIRED
PACKAGE CONTENTS
| PART | DESCRIPTION | QUANTITY | Stock Part# |
|---|---|---|---|
| A | Crossbar Assembly | 1pc | 914978KIT |
| B | Wire Connector | 3pcs | |
| C | Outlet Box Screw Vis pour | **** 2pcs | |
| D | Quick Link | **** 2pcs | |
| E | Ceiling Canopy | **** 1pc | |
| F | Fixture Chain | **** 1pc | M382CHMBK |
| G | Fixture Loop | **** 1pc | N/A |
| H | Socket Assembly | 1pc | |
| I | Ring A | **** 2pcs | |
| J | Ring B | 2pcs |
D – If the ceiling canopy is not snug against the ceiling, remove it from the crossbar assembly. Adjust the length of the pre-assembled nipple by unscrewing the pre-assembled hex nut. Screw the nipple in or out of the crossbar until the correct length is achieved. Then, re-attach the ceiling canopy.
- A Adjust fixture chain length.
- B – C Install fixture chain.
- A – Pull the supply wires and ground wire up through the fixture chain alternating links.
- B – Push the ends of the supply wires and ground wire up through the loop and into the outlet box.
- C – Remove the canopy.
- D – Insert the remaining slack wire into the outlet box.
- Trim excess fixture wire leaving a minimum of 6 inches hanging out of the outlet box.
- Separate the smooth side and ribbed side of supply wire.
- Using wire strippers, strip each wire 1/2 inch from the end.
CARE AND MAINTENANCE
Wipe clean using soft, dry cloth or static duster. Always avoid using harsh chemicals and abrasives to clean fixture as they may damage the finish.
TROUBLESHOOTING
PROBLEM| POSSIBLE CAUSE| CORRECTIVE ACTION|
---|---|---|---
The lights will not turn on.|
- Bulb is burned out.
- Power is off.
- Faulty wire connection.
- Faulty switch.
|
- Replace light bulb.
- Make sure power supply is on.
- Check wiring..
- Test or replace the switch.
|
Fuse blows or the circuit breaker trips when light is turned on.|
Crossed wires or power wire is grounding out.|
Check wire connection.|
MADE IN CHINA
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>