Lowe s CA2298-S LED Mini Step Light Instruction Manual
- June 17, 2024
- Lowe s
Table of Contents
Lowe s CA2298-S LED Mini Step Light
Product Information
Specifications:
- Product: LED Mini Step Light
- Input Voltage: 120V 50/60Hz
Product Usage Instructions
Installation Instructions:
- Turn off the main power at the circuit breaker before installation.
- Ensure all electrical connections comply with local and NEC standards.
- Check all parts using the illustrations in the manual.
Assembly and Installation:
- Pull power supply wires from the OUTLET BOX and mount the MOUNTING BRACKET using MOUNTING SCREWS.
- Connect BLACK to BLACK and WHITE to WHITE, attaching GROUND WIRES with WIRE NUTS.
- Tuck wires carefully inside the outlet box.
- Place face plate on the fixture and lock the screw.
Product Features:
- This is an integrated LED fixture with no bulbs to replace.
- PIR Motion Sensor: Automatically turns lights ON when motion is detected and OFF after 1 minute of vacancy.
- Photocell Sensor: Automatically turns light on/off based on ambient light changes.
Frequently Asked Questions (FAQ)
-
Q: How does the PIR Motion Sensor work?
A: The PIR Motion Sensor activates lights when motion is detected and switches to standby mode when no motion is sensed for a period. -
Q: How does the Photocell Sensor function?
A: The Photocell Sensor detects ambient light changes and automatically controls the light based on the brightness level.
Input Volt. 120V 50/60Hz
Please read carefully and save these instructions, as you may need them at a
later date.
CAUTION
Turn off the main power at the circuit breaker before installing and
servicing the fixture, to prevent possible shock.
GENERAL
- All electrical connections must be by local and National Electrical Code (N.E.C.) standards. If you are unfamiliar with proper electrical wiring connections, obtain the services of a qualified electrician.
- Remove the fixture and the mounting package from the box and make sure that no parts are missing by referencing the illustrations on the installation instructions.
ASSEMBLY AND INSTALLATION
- Pull the power supply wires out from the OUTLET BOX (1) and mount the MOUNTING BRACKET (3) to the OUTLET BOX (1), using MOUNTING SCREWS (2).
- Attach the power supply wires to the fixture lead wires by connecting BLACK to BLACK (11), and WHITE to WHITE (10). Attach the POWER SUPPLY GROUND WIRE (6) from the OUTLET BOX and the FIXTURE GROUND WIRE (9) by using WIRE NUT(7).
- After the wires are connected, tuck them carefully inside the outlet box.
- Place face plate (8) on the fixture, lock screw(12).
- This is an integrated LED fixture, with no bulbs to replace
PIR Motion Sensor + Dusk to Dawn Photocell Sensor
- PIR Motion Sensor: Automatically turn to standby mode when people walk out of the reaction range. When motion is detected, is automatically turns lights ON, and turns lights OFF after 1 minute if the space is vacated.
- Photocell Sensor: No manual operation is required. Detecting ambient light changes and automatically turning on/off the light.
Tip : The photocell will activate in variable outdoor environments. When the brightness ranges from 30 to 90lux, it is possible that your lights may not turn on at the same time if you buy a group of products due to variation of photocell on each product, the difference is about 1-15minutes depending on applications
OVERVIEW
- OUTLET BOX (EXCLUDED)
- FIXTURE SCREW
- MOUNTING BRACKET
- WHITE FIXTURE WIRE
- BLACK FIXTURE WIRE
- FIXTURE GROUND WIRE
- WIRE NUTS
- FACEPLATE
- HOUSE GROUND WIRE
- WHITE SUPPLY WIRE
- BLACK SUPPLY WIRE
- INCLUDE SCREW