MIDLAND Guardian Pro Bike User Manual

: June 17, 2024
: MIDLAND

Table of Contents

MIDLAND Guardian Pro Bike
About this Guide
Main features
Controls description
What’s in the box
Technical specifications
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

MIDLAND Guardian Pro Bike

About this Guide

The content of this document is for information purposes and is subject to change without prior notice. We made every effort to ensure that this User Guide is accurate and complete. However, no liability is assumed for any errors and omissions that may have occurred. The manufacturer reserves the right to change the technical specifications without prior notice.

Main features

Action cam and motorbike DVR 2K
Frequency: 2.4GHz
Output power:<0.1W
Resolution: 2K (2304X1296)
Photo: 24MP
Cycle recording
Wind noise reduction
Waterproof IP65
Wi-Fi
Wide angle lens: 170°
Video format: MOV (H.264)
Image stabilizer
Dual Core processor 600MHz
Battery capacity: 1200mAh
Supports memory card up to 256GB

Warnings
This manual includes details on how to use the device, its working, technical specifications and precautions. We recommend to carefully read it before using the camera and keep it for the future. We trust that this DVR will meet your needs for a long time! An improper installation and an incorrect use of the camera could cause personal injuries to the user and damages to the vehicle. For this reason we recommend to pay the utmost attention while installing the device and to periodically check that the mounting supports are intact and properly fixed.

Do not try to open the shell and repair it: this will void the warranty. If you experience problems, go to the professional service centre for repairing.
For the best quality of videos, the lens must be clean. To clean the camera and its lens do not use thrill chemical substances or clean solvents, but only a moist soft cloth.
At the end of its life, do not discard the camera randomly and do not throw it into the fire, it may explode.
The company is NOT responsible for the loss of any data/content during operation.

Controls description

Lens
Upper side
ON/OFF/Function button
SD memory card slot
USB-C connector
Microphone
Led status indicators

What’s in the box

Camera
Handlebar mount
Ring with quick release
Adaptors for tubulars
Fixing ring for camera
Flat mount
Adhesive for flat mount
Sliding mount
Fixing screw
Allen wrench
USB-C cable

Battery recharge
BIKE GUARDIAN PRO can be recharged by connecting the USB cable to a proper charger or to a PC. By connecting the power supply cable the camera automatically turns on and starts recording. It is also possible to recharge the battery without recording: keep pressed the Function key till the camera vibrates for 3 times as confirmation it has stopped recording. While charging, the blue led will blink and will be steady when the recharge is full.

Setting date and time
Connect the camera to your phone through WIFI and open the app: date and time will be automatically updated according to your smartphone.

Microphone sensitivity
BIKE GUARDIAN PRO is equipped with Wind noise reduction and for this reason, the volume may sound as low. It is possible to adjust the mike sensitivity to the desired level through the APP.

Play videos
Some devices could not be able to play recorded videos or audio if some “codec” are missing. In such a case, try to install another video player or update the one you are currently using. If, through the APP, videos are played correctly, it means that BIKE GUARDIAN PRO does not have any functioning problems.

Fixing the camera

Fix the camera to the desired support, making sure not to obstruct the driver’s view and videos.
Connect the power supply cable to BIKE GUARDIAN PRO and to a power source.

Attention: the waterproof condition is guaranteed only with the connector to fix of the camera. Should the cable not be used, we recommend to apply the rubber protection to the recharge jack. The USB connector on the other end must positioned in such a way to be protected from rainwater.

Adhesive support
Before attaching the adhesive support, carefully clean the surface where it will be applied. Fix the camera to the adhesive support. Midland is not resposible in case of loss of the device.

Function

| Power supply cable|

Camera status

|

Key pressure

|

Vibration

|

LED

---|---|---|---|---|---
Turning on and recording|

Not connected

|

OFF

|

5 sec.

|

Long+short

|

Red blinking

Shooting a photo|

Not connected

|

ON

|

1 clic

|

Short

|

–

Wi-Fi activation|

Not connected

|

ON

|

2 clic

|

–

Connect the cable

|

–

|

–

|

Long+short

|

Red and blue blinking

Stop recording|

Connected

|

ON

|

1 clic

|

–

| Red on, blue blinking
Start recording|

Connected

|

ON

|

1 clic

|

Short

| Red and blue blinking

Turning off

| Disconnect the cable|

ON

|

–

|

–

|

Led off

Micro SD
It is recommended to format the micro SD card before the initial use, otherwise data may be lost. Insert the SD card when the camera is OFF. Connect the camera to your phone through the APP. Format the SD Card with the APP. BIKE GUARDIAN PRO supports micro SD cards from 8 up to 256 GB. We recommend using SD cards: class 10 U3 high speed or higher. We suggest regularly deleting the data from the memory card.

App “VSYSTO”

The VSYSTO APP allows to control the camera remotely using a smartphone or tablet. The APP allows: live preview, playback and video/photo sharing.

Download the “VSYSTO” APP on your smartphone or tablet from App Store or Google Store.
To turn on BIKE GUARDIAN PRO connect the power supply cable to the camera and to a power source.
Wi-Fi automatically turns on.
In the Wi-Fi settings of your smartphone or tablet, connect to the network “SSID: BIKE GUARDIAN PRO”.
Edit the password “1234567890”.
Open the “VSYSTO” APP on your smartphone or tablet.

Reset
When the camera does not work properly or is jammed, we suggest that you follow these

steps

Keep pressed the Function button for 15 seconds.
Pull out the micro SD card from the camera and format it with a PC
Insert the micro SD card into the camera again and format it from the camera through the app.

Technical specifications

Frequency 2.4GHz
Power < 0.1W
Resolution 2K
Frame rate 2K@ 30fps
Wide angle 170°
Video format MOV
Waterproof IP65
Power supply USB 5V DC
MicroSD Fino a 256Gb classe 10 U3
Battery 1200 mAh (up to 120min)

To download further firmware updatings and for information about the warranty please go to www.midlandeurope.com

Produced or imported by: MIDLAND EUROPE srl Via. R.Sevardi 7 42124 Reggio Emilia – Italy. Read the instructions carefully before installation and use.