MPOW BH523A MFLY True Wireless Earbuds User Manual
- June 6, 2024
- MPow
Table of Contents
XMPOW MFLY
True Wireless Earbuds
User Manual
MODEL BH523A
PACKING LIST
DIAGRAM
POWER ON
Mode 1 (Auto)
Mode 2 (Manual)
- The earphones automatically turn on (with blue LED light flashing) and start pairing when they are taken out from the charging case.
- In the shutdown status and when the earphones are not in the charging case, simultaneously press and hold the MFB of both earbuds for 2 seconds to power on ( with the blue LED light flashing).
POWER OFF
Mode 1 (Auto)
Mode 2 (Manual)
- Put the earphones back in the charging case. and they’ll shut down automatically
- If the earphones are not in the charging case. just press and hold the MFB of both earbuds for 5 seconds to power them off. (Mode 2 cannot be conducted during music playing or calling)
PAIRING
Mode 1
Mode 2
- The earphones automatically start pairing (with the red and blue LED light flashing alternately on both earbuds.) when they are taken out from the charging case. and choose “xMpow Mfly on your device.
- Manually Switch to Pairing Mode:
When both earbuds are not in the charging case and in the state of power-off (keep pressing both MFB for 5 seconds to turn them off). Keep pressing both MFB for 4 seconds to re-enter into pairing mode in which LED flashes blue and red alternately. Finally. choose “Mpow MBits S” on your device.
MUSIC
INCOMING CALL
Volume Up / Down
Volume +: Tap the Right(R) earbud once to increase one level. Volume -: Tap
the Left(L) earbud once to decrease one level.
Play / Pause:
Double-tap the MFB button on the Right (R) or Left (L) earphones.
Next / Previous Track:
Next Track Triple-tap the MFB button on the Right (R) earphone.
Previous Track Triple-tap the MFB button on the Left (L) earphone.
Answer
Tap the MFB of either earbud once.
Mute
When you are having a phone call. you can double-tap either earbud to mute
or unmute the earbud’s microphone.
Hang Up
Triple-tap the MFB of either earbud.
Reject
Press and hold the MFB of either earbud for 1 second.
Activate Siri
Press and hold either earbud for 1.5 seconds and then release your finger
immediately.
RESET
- When both earbuds are in the charging rase. simultaneously press and hold both earbuds for 10 seconds to clear paired devices.
- The earbud’s blue light will stay on for 1 second before disappearing. which means successful resetting.
CHARGING
Mode 1: Wired charging
Mode 2: Wireless Charging
Note: the wireless charger is sold separately
Do not put the earbuds in the charging case when the earbuds are wet.
CORRECT DISPOSAL OF THIS PRODUCT
( Waste Electrical& Electronic Equipment ) This Marking showed on the product
or its literature. indicates that it should not be disposed of with other
household wastes at the end of its working life. To prevent possible harm to
the environment or human health from uncontrolled waste disposal. please
separate this from other types of waste and recycle it responsibly to promote
the sustainable reuse of material resources. Household users should
contact either the retailer where they purchased this product. or their local
government office. for details of where and how they can take this item for
environmentally safe recycling. Business users should contact their supplier
and check the terms and conditions of the purchase contact This product should
not be mixed with other commercial wastes for disposal.
FCC STATEMENT
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment
This device complies with part 15 of the FCC Rules Operation is subject to the
following two conditions (1 ) This device may not cause harmful interference.
and (2) this device must accept any interference received including
interference that may cause undesired operation.
FCC Radiation Exposure Statement This equipment complies with FCC
radiation exposure limits set forth for an uncontrolled environment
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>