SANZIE HS001 Wireless Tray Instruction Manual

SANZIE HS001 Wireless Tray

Specifications

• Wireless charging tray
• Supports Qi standard
• Compatible with most mobile phones, headphones, and other devices with wireless charging function
• Minimum distance of 20cm between the radiator and the body
• USB-C connection for charging

Product Overview
Thank you for choosing our wireless charging tray! This product adopts the latest wireless charging technology, supports Qi standard, and is widely compatible with most mobile phones, headphones, and other devices that support wireless charging function on the market. It simultaneously meets your storage and charging needs, making your life more convenient.

Safety Instructions

1. Do not use this product in damp, dusty, or high-temperature environments.
2. Before use, please check that the charger and power socket are not damaged to avoid the risk of short circuits or electric shock.
3. Only use under specified voltage and current; avoid using power adapters that do not meet specifications.

Matters Needing Attention
This product can transmit electricity through most protective covers (limited to rubber/plastic/TPU protective covers with a thickness of less than 5 millimeters). For fast charging, please remove the phone case before charging.

How to Charge

• Wireless charging area
• USB-C: Connect USB-C end to the end of the power adapter.
• Place your device on the wireless charging tray to initiate charging.

Frequently Asked Questions (FAQ)

1. Can I use any power adapter to charge the device?
   No, it is recommended to use a power adapter that meets the specified voltage and current requirements to avoid damage to the device.

2. How far should I keep the device from my body while it is charging?
   The device should be kept at a minimum distance of 20cm from your body while charging to meet general RF exposure requirements

3. Is it necessary to remove the phone case before charging?
   For fast charging, it is recommended to remove phone cases that are thicker than 5 millimeters.

(  amazon.com/sanzie )

WIRELESS TRAY Instruction Manual
Please Read This Guide for Safe & Optimal Use

Warning :
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

• If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

1. The device has been evaluated to meet general RF exposure requirement. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
2. Equipment system maintenance is simple, please refer to the manual.
3. The user can take simple measures to correct the interference. Such as staying away from interference sources, turning off interference sources, etc.

How to charge

1. Connect the USB-C end to the output end of the power adapter.
2. Insert the power adapter into the power outlet.
3. Place your device in the wireless charging area.

Product Overview

Thank you for choosing our wireless charging tray! This product adopts the latest wireless charging technology, supports Qi standard, and is widely compatible with most mobile phones, headphones, and other devices that support wireless charging function on the market. Simultaneously meeting your storage and charging needs, making your life more convenient.

Safety instructions

1. Do not use this product in damp, dusty, or high-temperature environments.
2. Before use, please check that the charger and power socket are not damaged to avoid the risk of short circuits or electric shock.
3. Only use under specified voltage and current, avoid using power adapters that do not meet specifications.

Matters needing attention

1. This product can transmit electricity through most protective covers (limited to rubber/plastic/TPU protective covers with a thickness of less than 5 millimeters). But for faster charging, please remove the phone case before charging.
2. If abnormal charging speed or overheating of the device is found, please stop using it immediately.
3. The charger is a precision electronic product, please avoid external damage such as falling or squeezing.

Note : AC adapter and USB cable NOT included

References

• SANZIE

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>