MIDLAND Bikeplay Guardian Display Multimediale Instructions
- June 1, 2024
- MIDLAND
Table of Contents
MIDLAND Bikeplay Guardian Display Multimediale
Specifications
- Maximum device current drain: 600 mAh
- Connection Methods: Motorbike Battery, USB
- Recommended wiring: Connect the Red wired (+) to a positive under key for zero consumption when the motorbike is off
Product Usage Instructions
Connection and Setup
To set up the Bikeplay Guardian, follow these steps:
- Choose the appropriate connection method (Motorbike Battery or USB).
- Connect the device to power following the provided wiring diagram.
- Pair your smartphone via Bluetooth to enable additional features like CarPlay and Android Auto.
- Follow the on-screen instructions to authorize CarPlay or Android Auto from your phone.
Icons and Functions
- Cam: Access camera settings and views.
- CarPlay: Connect to Apple CarPlay.
- Android auto: Connect to Android Auto.
- Panel
- Rewind: View recorded videos.
- Settings: Access device settings menu.
- Bluetooth: Connect to Bluetooth devices.
Settings Menu
The settings menu allows you to customize various aspects of the Bikeplay
Guardian:
- Pressure
- Speed unit
- Screen Saver
- Language
- GPS info
- Time Setting
- Key Volume
- WiFi Switch
- Format SD
- Audio Out
- Reset factory Version
Frequently Asked Questions (FAQ)
Q: What should I do if the device does not turn on?
A: If the device does not turn on, try turning off WiFi,unpairing
Bluetooth from your phone, and reconnecting to Midland BikePlay via Bluetooth.
Q: How do I pair my smartphone for Apple CarPlay or Android Auto?
A: To pair your smartphone for Apple CarPlay or Android Auto, follow
these steps:
- Pair your smartphone via Bluetooth.
- Select the corresponding OS on the device.
- For CarPlay, authorize the use of CarPlay from your phone. For Android Auto, the pairing should occur automatically.
- Note: Ensure that WiFi on your smartphone is turned on for initial pairing. The display will switch to WiFi after the initial Bluetooth connection.
The equipment is free use in all UE countries.
Attention
- Please do not use a high-pressure water gun to flush the host and the cameras.
- Please do not use alcohol, stain removal solution and other corrosive solvents to wipe the host and lens to avoid damaging the appearance of the product and waterproofness.
- Please make sure to connect all the units before turning on the power.
- Do not fold the cable lines during installation.
- Please use a certified 32-256 GB MICRO TF memory card with a CLASS 10 U3 classification or above and format the memory card before first use.
- Long-term use of the memory card will cause fragmentation, so it is recommended formatting the memory card regularly.
- Press the rubber plugs after inserting to ensure the waterproofness of the product.
- Tyre Pressure Sensors can be paired only after be installed on tyres.
Before Starting
- Before using the device, you have to insert the memory card.
- Unscrew the two screws and remove the cover in the lower side of the screen.
- Insert the memory card into the proper slot.
- Close the cover by tightening the two screws
Wiring Diagram
Maximum device current drain is 600 mAh.
We suggest to connect the Red wired (+) to a positive under key, so when the
motorbike is off the consumption will be zero.
Apple CarPlay
- Pair your smartphone via Bluetooth
- Select the corrisponding OS
- CarPlay: Allow the use of CarPlay from Your phone.
Android auto
- Pair your smartphone via Bluetooth
- Select the corrisponding OS
- Android: Should automatically pair
Note: To pair the unit, t he WiFi of the Smartphone must be On. After the initial connection via Bluetooth the display will switch to WiFi.
Main Menu
- A. Recording time indicator
- B. Resolution Indicator
- C. GPS indicator
- D. Bluetooth activated
- E. WiFi activated
- F. G-sensor indicator
- G. Memory card indicator
- H. Display brightness
- I. Volume adjustment
- Driving recorder: click to enter cameras views and settings
- CarPlay: connect to CarPlay
- Android auto: click to connect Android auto
- Panel
- Replay: click to enter to view the videos
- Settings: click to enter the menu settings
- Bluetooth: click to connect to the Bluetooth
Settings Menu
-
Function Explanation
-
Pressure TPMS settings
-
Speed unit Km/h – Mp/h
-
Screen Saver Set Screen Saver delay time
-
Language Select Language
-
GPS info GPS signal information
-
Time Setting Set the device time (after connecting to GPS/
-
WiFi/Bluetooth, the time is set automatically)
-
Key Volume ON/OFF: Turn ON/OFF the touch key tone
-
WiFi Switch ON/OFF: Turn On/OFF the WiFi
-
Format SD Format the memory card
-
Audio Out BikePlay/Smartphone: When switched to «BikePlay» the audio of the phone is played from BikePlay internal speaker. When switched to «Mobile Phone» the audio of the phone is played from the phone or from the connected Bluetooth device.
NB Select «Mobile Phone» to use a Bluetooth Intercom Device -
Reset factory Reset the Midland BikePlay Guardian
-
Version Check the version/Bluetooth name/WiFi name and password
Connecting to Kycam2 App
With the application KYCAM2 it will be possible to have remote access to the main functionalities of Midland BikePlay Guardian.
- Turn Off Bluetooth in both devices (Midland BikePlay Guardian and Smartphone)
- Enable the WiFi on Midland BikePlay Guardian
- On your Smartphone connect to the WiFi Network “Midland BikePlay”
- Use the password 12345678 to connect
- Open KYCAM2 App
Troubleshooting
Technical Specifications
- Frequency 2.4 GHz
- Power ≤ 10dBm
- Protection level IP67
- Screen Mirroring Supports Apple Carplay and Android auto
- Video resolution 1080P+1080P – QFHD 1440P + Q FHD 1440P
- Numbers of cameras 2 (front and rear)
- Display 5.0-inch IPS display
- WiFi/APP interface Yes
- GPS track Yes
- Format H.264: Video format TS, Compression format H.264
- Memory card capacity 32-256GB Class 10 U3
- Voltage Requirement 12-30V or 5V 2A (USB C)
For information about the warranty, please visit midlandeurope.com
Scopri molto più
See more on
midlandeurope.com