MIDLAND Plug and Play Reverse Camera For Campers Installation Guide
- May 15, 2024
- MIDLAND
Table of Contents
MIDLAND Plug and Play Reverse Camera For Campers
About this Guide
The content in this document is for information purpose and is subject to change without prior notice.
We made every effort to ensure that this User Guide is accurate and complete. However, no liability is assumed for any errors and omissions that may have occurred.
MIDLAND refuses any liability:
- in the event of loss or accidental breakage caused by the failure or breakage of the fixing supports;
- in case of any possible damage caused by such failure or breakage.
The manufacturer reserves the right to change the technical specifications
without prior notice.
Keep this user manual for further reference.
Warnings
- Do not expose Monitor to extreme temperature. Storage temperature is -30÷80°C, working temperature is -20÷70°C
- Do not use the Monitor with excessive moisture, dust or smoke.
- Do not use the Monitor with excessive vibrations, shock or falls.
- Do not puncture, scratch or use abrasive cleaning products.
- Install the wires in way they cannot be ripped or make you falling down
- Leave at least 5cm space behind the Monitor
- Monitor is not waterproof
- The system can be powered 12 V
- To clean the camera do not use thrill chemical substances or clean solvents, but only a moist soft cloth.
- At the end of its life, do not discard the system randomly and do not throw it into the fire, it may explode.
- Due to local laws and vehicles safety considerations, do not manually operate the device while driving.
This camera is intended for non-commercial use, within the limits permitted by applicable law.
WARNING
Monitor works with high voltage inside. Opening and repairing has to be done
by professional and authorised technicians. Any opening or modification will
void the warranty.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR
BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Monitor features
- Operating frequency: 2.4GHz
- Wireless up to 20m
- 12V power supply
- High resolution monitor
- Mirror the image
- Auto pairing with camera
- Screen dimensions 4.3”
- Pixel: 480xRGBx272
- Brightness: 400 cd/m2
- Image format: 16:9
- Contrast: 300:1
- Video system: PAL/NTSC
- Power supply: DC12V+/10%
- Cigarette lighter plug with coiled cable 80cm (extendable)
- High resistance suction cup mount, adjustable of 360° at the base and of 90° vertically
Camera Features
-
Operating frequency: 2.4GHz
-
120° viewing angle
-
12 IR leds for night vision
-
IP 67 certification
-
Auto pairing with monitor
-
Resolution 580×492 NTSC
-
Automatic white balance
-
Automatic power on/off
-
3 installation types: magnetic, adhesive with Velcro, with fixing screws
-
Adjustable tilting
-
Integrated Li-Ion battery pack 2160 mAh
Battery life 6-8 hrs in continuous use (it can reduce if used by night); some days in standby mode. -
Recharge jack
-
USB recharge cable supplied in the package
Box content
- Wi-fi Monitor
- Wi-fi Camera
- Power supply cable with cigarette lighter adapter (for Monitor)
- USB cable (for camera)
- Magnetic mount
- N°4 fixing screws
- Adhesive Velcro for monitor
- Suction cup mount for camera
System description
Monitor
- 7” LCD screen
- ▼ button: menu levels
- ▲ button: menu levels/mirror image
- MENU/POWER: press to enter system settings
- Fixing bracket
Camera
- 12 IR Leds
- Lens
- Power/pairing
- Recharge plug
- Mounting bracket
Kit setup
- Connect the monitor’s power supply cable to the cigarette lighter
- Turn on the camera by pressing the POWER button
- Now it’s possible to view the images
The camera can be positioned on the rear side of the motorhome, but can also be placed on the back of your vehicle when coupling a towing/caravan.
Quick use
- Connect the monitor to the cigarette lighter plug and the system automatically turns on.
- Press MENU button to customize the monitor settings.
Menu
Push MENU button, you will find the following options:
BRIGHTNESS
You can set the brightness of the image
CONTRAST
You can set the image contrast
HUE
You can set the image hue
LINES ON/OFF
Enables/disables the guidelines
MIRROR
press shortly ▲ and the image will be overturned horizontally.
Pairing
- Keep pressed the MODE button; the display will show “Pairing”.
- Turn on the camera; within a few seconds the screen displays what is being filmed.
Display Symbol
- Wi-Fi signal strength
- Battery status indicator of the camera
Troubleshooting
| Problem | Possible Solution |
|---|---|
| No image | Verify the good connection of the monitor’s power cable |
| Dark/pale image or bad colour | Set correct contrast, brightness and hue of the |
image
Monitor Technical Specs
| LCD | 4.3” (16:9) |
|---|---|
| Monitor Resolution | 480 RGB x 272 |
| Contrast | 300:1 |
| Brightness | 400cd/m2 |
| Working Frequency | 2400 MHz |
| Output power | 17 dBm |
| Tx Distance | 20 m |
| Video | PAL/NTSC |
| Power Supply | 12±20% |
| Power Consumption | Max 1,3W |
| Working Temperature | -20 / +70°C |
| Stocking Temperature | -30 / +80 °C |
| Size | 122x80x25mm |
Camera Technical Specs
| Sensor | OC7959 1/4” CMOS |
|---|---|
| Resolution | 580×492 |
| View Angle | 120° |
| IP Protection | IP67 |
| Night Vision | 12 led IR |
| Tx Distance | 20 m |
| Tx Distance 20 m Power supply | Integrated Li-Ion battery pack 2160mAh |
| Working Temperature | -20 / +70°C |
| Stocking Temperature | -30 / +80 °C |
| Size | 78x65x43mm |
Specifications may vary without prior notice.
To download further updating and for information about the warranty please
visit www.midlandeurope.com
Table 1
| Frequency | Power | Equipment type/model |
|---|---|---|
| 2.4GHz | 17dBm | WIRELESS RV CAM |
Certifications
CY/MT/IE
The manufacturer MIDLAND EUROPE Srl, hereby declares that the product listed in Table 1 is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. The declaration of conformity is available on the web site: http://www.midlandeurope.com/it/pagina/10090-certifications
AT/DE/CH/LI
The manufacturer MIDLAND EUROPE Srl. hereby declares that the products listed in Table 1 comply with the requirements and provisions of Comply with Directive 2014/53/EU. The declaration of conformity is available at the following link: http://www.midlandeurope.com/it/pagina/10090-certifications
Produced or imported by: MIDLAND EUROPE srl
Street. R.Sevardi 7 42124 Reggio Emilia – Italy.
Before use, read the instructions carefully.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>