Clarke HL400R Head Torch Instruction Manual

HEAD-TORCH
MODEL NO: HL400R
PART NO: 4003543

INSTRUCTIONS FOR USE

INTRODUCTION

Thank you for purchasing this CLARKE Head-torch. Before attempting to use this product, please read this manual thoroughly and follow the instructions carefully. In doing so you will ensure the safety of yourself and that of others around you and you can look forward to your purchase giving you long and satisfactory service.

PRODUCT OVERVIEW

This hands-free 5W COB LED head-torch with 40° angle adjustment and dimmer switch allows brightness to be adjusted from 20% to 100%.
The main light has one switch with four functions;- On, Flash, Auto-sensor and Off. Hold down the switch to enable the auto sensor function which will allow turning on/off just by waving a hand in front of the sensor.
The rear of the strap includes a red LED warning light which has two functions;- Flash or On, making it an ideal cycling light.
The adjustable headband has a foam brow for added comfort. It includes a battery charging level indicator powered by a rechargeable 3.7V 2.2Ah Li-ion battery and supplied with a micro USB charging lead.

SPECIFICATIONS

GENERAL SAFETY PRECAUTIONS

Please read and understand the following instructions before use.

1. DO NOT shine directly into your own, another person’s or an animal’s eyes.
2.  DO NOT allow children to use the head torch.
3.  DO NOT use the torch if you suspect that the battery or the torch casing is damaged.
4.  DO NOT leave batteries in a discharged state. Before long term storage remove batteries.
5.  DO NOT attempt to open the batteries.
6. DO NOT crush, puncture, short contacts or dispose of in fire or water.
7.  Replace only with the batteries designed for this product.
8. If the electrolyte in the batteries gets on your skin, thoroughly rinse with water. If it gets in your eyes, rinse thoroughly with cool water and seek immediate medical attention.
9.  DO NOT use the headtorch during recharging.
10. Inspect the charger cable and connector for damage to ensure items are safe before connecting to the mains power supply. DO NOT use if damaged.

ENVIRONMENTAL RECYCLING POLICY
Through purchase of this product, the customer is taking on the obligation to deal with the WEEE in accordance with the WEEE regulations in relation to the treatment, recycling & recovery and environmentally sound disposal of the WEEE.
In effect, this means that this product must not be disposed of with general household waste but according to the laws governing Waste Electrical and Electronic Equipment (WEEE) at a recognised disposal facility.
The light source contained in this worklight has a life expectancy of approximately 30000 hours after which the worklight should be disposed of in an environmentally responsible way.
The Lithium Ion battery falls under the Waste Batteries and Accumulators Regulations 2009 and should be disposed of in a controlled manner. Recycle or dispose of used batteries as stipulated by local regulations.

OPERATION

TORCH OPERATION

1. Press the power button (fig.1) once to turn the light on.
2.  Press the power button twice (fig.1) to put the light into flashing mode.
3.  Press again to turn the unit off.
4.  Swivel the lamp by up to 40º to suit the task.

LIGHT SENSOR

1. Press the power button for three seconds until the red LED illuminates.
2.  Pass a hand in front of the light until the light comes on.

RED LIGHT ON THE POWER PACK

1. Press the power button on the power pack (fig.2) for 3 seconds for a solid red light. If motion is seen by the sensor the light will turn on.
2. Press the power button twice for a flashing red light.
3. Use the dimmer switch to select high or low illumination.
   • To keep your worklight clean, wipe with a damp cloth only, DO NOT use detergents, chemicals or harmful abrasives. Never immerse in water.

BATTERY CHARGING

1. Connect the USB lead to the port on the rear of the power pack (fig.2) and a USB power socket. Turn on the power supply.
   • During charging the Red LED will be lit. When fully charged the LED will turn green.
   • The worklight should not be operated while charging.

2. If you plan to store the headlight (e.g. for emergencies), we recommend that the battery is fully charged before doing so. Fully charge after each use and after every 3 months. This will ensure the longest possible battery life.

3. NEVER abuse the charger cable or yank the cable to disconnect it. Keep the cable away from sharp edges/hot surfaces.
   • Do not leave the battery in a discharged state. Recharge after use.

GUARANTEE
This product is guaranteed against faulty manufacture for a period of 12 months from the date of purchase. Please keep your receipt which will be required as proof of purchase.
This guarantee is invalid if the product is found to have been abused or tampered with in any way, or not used for its intended purpose.
Faulty goods should be returned to their place of purchase, no product can be returned to us without prior permission.
This guarantee does not effect your statutory rights.

COMPONENT PARTS

DECLARATIONS OF CONFORMITY

Hemnait Street, Epping, Essex, CM16 4LG
DECLARATION OF CONFORMITY
This is an important document and should be retained.
We hereby declare that this product(s) compiles with the following jegistation: The Batteries and Accumutators (Placing on the Market) Regulations 2008
The Electromagnetic Compatibility Regulations 2016 The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012
The following standards have been applied to the product(s):
1EC 62321-2:2013, 1EC 62321-3-1:2013, IEC 62321-4:2013+A1:2017, IEC 62321-5:2013, IEC 62321-6:2015, IEC 62321-7-1:2015, IEC 62321-7-2:2017, IEC 62321-8:2017, BS EN 61547:2009 BS EN IEC 55015:2019+A11:2020, BS EN IEC 61000-3-2:2019, BS EN 61000-3-3:2013+A 1:2019
The technical documentation required to demonstrate that the product(s) meet(s) the requirement(s) of the aforementioned legislation has been compiled and is available for inspection by the relevant enforcement authorities.
The UKCA mark was first applied in: 2023

Signed: Fitzwiliam Halll, Fitzwilliam Place, Dublin 2
DECLARATION OF CONFORMITY
This is an important document and should be retained.
We hereby deciare that this product(s) complies with the following legislation:
2006/66/EC Battery Directive
2014/30/EU Electromagnetic Compatibility Directive
201 1/65/EU Restriction of Hazardous Substances (RoHS) Directive
The following standards have been applied to the product(s):
1EC 62321-2:2013, IEC 62321-3-1:2013, LEC 62321-4:2013+A1:2017, IEC 62321-5:2013, IEC 62321-6:2015, IEC 62321-7-1:2015, IEC 62321-7-2:2017, 1EC 62321-8:2017, EN 61547:2009,  EN IEC 55015:2019+A11:2020, EN IEC 61000-3-2:2019, EN 61000-3-3:2013+A1:2019
The technical documentation required to demonstrate that the product(s) meet(s) the requirement(s) of the aforementioned legisiation has been compiled and is available for inspection by the relevant enforcement authorities.
The CE mark was first apptied In: 2023

Signed:

AIR COMPRESSORS
From DIY to industrial, Plus air tools, spray guns and accessories.
GENERATORS
Prime duty or emergency standby for business, home and leisure.
POWER WASHERS
Hot and cold, electric and engine driven – we have what you need WELDERS
Mig, Arc, Tig and Spot.
From DIY to auto/industrial.
METALWORKING
Drills, grinders and saws for DIY and professional use.
WOODWORKING
Saws, sanders, lathes, mortisers and dust extraction.
HYDRAULICS
Cranes, body repair kits, transmission jacks for all types of workshop use.
WATER PUMPS
ibmersible, electric and engine driven for DIY, agriculture and industry.
POWERTOOLS
Angle grinders, cordless drill sets, saws and sanders.
STARTERS/CHARGERS
All sizes for car and commercial use.

PARTS & SERVICE:
0208 988 7400
Parts Enquiries
Parts@clarkeinternational.com
Servicing & Technical Enquiries
Service@clarkeinternational.com
SALES: UK 01992 565333 or Export 00 44 (0)1992 565335
Clarke INTERNATIONAL Hemnall Street, Epping, Essex CM16 4LG
www.clarkeinternational.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>