Genius HS-M910BT Wireless Earbuds Black

Product Information

Specifications:

• Model: HS-M910BT
• Features: Wireless Noise Reduction
• Language Support: Multi-language Quick Guide

Product Usage Instructions

Charging:
Before first use, ensure the device is fully charged using the provided charging cable.

Pairing:
Turn on the device by pressing the power button. Activate Bluetooth on your device and select “HS-M910BT” from the list of available devices to pair.

Noise Reduction:
To activate noise reduction, press the designated button on the headphones. Adjust the level of noise reduction as per your preference.

Multi-language Guide:
Refer to the included multi-language quick guide for detailed instructions on using different features and settings.

Frequently Asked Questions (FAQ):

Q: How do I reset the device?
A: To reset the device, press and hold the power button for 10 seconds until you see the indicator lights flash.

Q: How do I switch between languages on the device?
A: Use the language settings option in the device menu to select your preferred language from the available options.

Declaration of Conformity

• The following designated product:
• M/N: HS-M9XXXBT Series is herewith confirmed to comply with the requirements set out in the Council Directive on the Approximation of the Laws of the Member States relating to Radio Equipment Directive (2014/53/EU). For the evaluation regarding the electromagnetic compatibility, the following standards were applied:
• EN 300 328 / EN 301 489-1 / EN 301 489-17 / EN 62479 / EN 62368-1
• This declaration is prepared for the manufacturer:

KYE SYSTEMS CORP.

492, Sec. 5, Chongxin Rd., Sanchong Dist., New Taipei City 241017, Taiwan

(R.O.C.)

FCC STATEMENT

1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
2. This device may not cause harmful interference, and
3. This device must accept any interference received, including interference that may cause undesired operation.
4. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
  The device has been evaluated to meet general RF exposure requirement.
  The device can be used in portable exposure condition without restriction.

Symbol for Separate Collection in European Countries
This symbol indicates that this product is to be collected separately.

The following apply only to users in European countries:

• This product is designated for separate collection at an appropriate collection point.
  Do not dispose of as household waste.

• For more information, contact the retailer or the local authorities in charge of waste management.

Smart Touch Control

Product Overview

Operation Description

/ Long press 2s to power on
Power off| Charge case closed| Put L / R earbuds into Charge case

and Close case / Long press 5s to power off

Paring (mono)| Charge case closed| Search “HS-M910BT” by phone and

connect

Power on and connect phone automatic| Charge case opened| Open case (L and R earbud paired before) L / R earbuds auto paring, connect phone after L / R paired
Disconnect| Standby| Turn off Bluetooth function on the phone / disconnect by long distance

Operation function

| ****

IOS / Android

| Play / Pause| Short press one time on L / R
SIRI| Touch press 2 seconds on L / R
Volume Adjustment| Triple touch press left or right earbuds to decrease or increase the volume when listening music
Music Switch| Double touch press Left or Right earbuds go to the previous or next songs when music playing
Pick Up / Hang Up| Short press one time on L / R
Reject Call| Long press 2 seconds on L / R
Charge Mode| Bluetooth earbuds full charge, get into dormant mode (under close the charge case)
Charge| Put the Bluetooth earbuds to charge case, the earbuds charge full and power off (under close the charge case)

KYE Systems Corp.

492, Sec. 5, Chongxin Rd., Sanchong Dist.,

New Taipei City 241017, Taiwan
Tel: 886-2-2995-6645
Fax: 886-2-2995-6649

Email: support@geniusnet.com.tw
(Tech. Support) http://www.geniusnet.com

For actual items, refer to the physical goods contained herein.

• Product storage conditions : Temperature: -20ºC~50ºC / Humidity : 5%~85%.

References

• Каталог декларацій відповідності MTI

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>