Ergo 8250S Wireless Vertical Ergonomic Silent Mouse

Product Information

• Product Name: Ergo 8250S Wireless Vertical Ergonomic Silent Mouse
• Manufacturer: KYE Systems Corp.
• Product Dimensions: 80mm x 100mm (W x H)
• Product Weight: Not specified
• Model Number: 12030111400-A
• FCC ID: FSUGMZM9 (Mouse), FSUGMZMA (Dongle)
• Rating: DC 5V 100mA(Max)
• Country of Origin: Made in China

Product Usage Instructions

1. Insert the dongle into an available USB port on your computer.
2. Turn on the mouse by sliding the power switch located on the bottom of the mouse to the “on” position.
3. The mouse will automatically connect to the dongle and be ready for use.
4. Use the mouse as you would any other mouse. The vertical design is ergonomic and may take some getting used to if you are accustomed to a traditional horizontal mouse.
5. To conserve battery life, turn off the mouse when not in use by sliding the power switch to the “off” position.
6. If the mouse stops working or becomes unresponsive, try replacing the batteries or resetting the connection by turning off the mouse, removing the dongle from the USB port, and reinserting it.

Mouse: Ergo 8250S
FCC ID: FSUGMZM9

Dongle
FCC ID: FSUGMZMA
Rating: DC 5V 100mA(Max) www.geniusnet.com｜KYE Systems Corp. MADE IN CHINA

* For actual items, refer to the physical goods contained herein.

• Product storage conditions : Temperature: -20ºC~50ºC / Humidity : 5%~85%.

Declaration of Conformity

The following designated product:
Wireless Mouse: Ergo 8250S, Ergo XXXXX Series is herewith confirmed to comply with the requirements set out in the Council Directive on the Approximation of the Laws of the Member States relating to Radio Equipment Directive (2014/53/EU).

For the evaluation regarding the electromagnetic compatibility, the following standards were applied:

• EN 300 440
• EN 301 489-1
• EN 301 489-3
• EN 62479
• EN 62368-1

This declaration is prepared for the manufacturer:
KYE SYSTEMS CORP.

492, Sec. 5, Chongxin Rd., Sanchong Dist., New Taipei City 241017, Taiwan

(R.O.C.)
Ricky Chen
Project Manager of QACSD
KYE SYSTEMS CORP

Federal Communication Commission(FCC) interference statement:
This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in particular installations. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient / Relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio / TV technician for help.
  This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference. and
2. This device must accept any interference received, including interference that may cause undesired operation.

FCC CAUTION: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user’s authority to operate the equipment.
RF exposure warning: The equipment complies with RF exposure limits set forth for an uncontrolled environment. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.

Disclaimer
The following does not apply to any country where such provisions are inconsistent with local law: KYE Systems Corp. makes no warranties with respect to this documentation, whether expressed or implied. All material is provided “as is”. This includes, but is not limited to, any implied warranties of merchantability and fitness is for a particular purpose. The information covered in this document is subject to change without notice.
KYE Systems Corp. assumes no responsibility for any errors that may appear in this document. All brand names mentioned in this manual are trademarks or registered trademarks of their respective companies.
Copyright KYE Systems Corp. All rights reserved.

Overview

Hardware Installation

1. You can connect the receiver to a USB port of a PC.
2. Install one AA battery in the mouse as instructed.
3. Make sure that you have switched on the power switch underneath the mouse.

Button Assignment

1. Left button: Provides traditional mouse functions such as click double click or drag.
2. Right button: You can assign this button to frequently used keyboard and mouse functions.
3. Middle button: Press this button to surf the Internet and Windows documents.
4. DPI adjustment: 800/1200/1600 DPI
5. Forward: Scroll up the page.
6. Backward: Scroll down the page.

Warning: (Troubleshooting)

1. Do not use the wireless optical/laser mouse on a desk which is made of glass or mirror.
2. If you feel the mouse does not move smooth as usual, it is possible the batteries have lost their charge so you need to replace them. Remember to put the batteries in the correct direction.

Symbol for Separate Collection in European Countries
This symbol indicates that this product is to be collected separately.

The following apply only to users in European countries:

• This product is designated for separate collection at an appropriate collection point.
  ****Do not dispose of as household waste.

• For more information, contact the retailer or the local authorities in charge of waste management.

References

• Genius US Website – Genius designs personal peripheral devices with a target to provide a better experience in everyone's lives. Visit Genius to find your devices with high quality, easy usage and effective cost.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>