Genius SW-2.11850BT 50 Watts Subwoofer Speaker System User Guide

PRODUCT OVERVIEW

Figure 1

Figure 2

Control Function

Connecting the SW-2.1 350 Speakers

1. Place the speakers next to the monitor, one on either side.
2. Connect the AC power cord (A) to a suitable AC outlet.
3.  Plug the satellite speaker cables (B) into the host speaker “OUTPUT” RCA jacks.
4. Insert the 3.5mm plug (green) of the audio cable (C) into the sound card or other audio source.

Control Function

1.  Power/Volume:Turn the Volume button to turn on/off the system power and to control the volume level.
2. Bass:Controls speaker’s bass level.
3. Treble:Rotate the treble control to increase/decrease the sound response.
4. Line In Jack:Accepts a 3.5mm stereo mini-plug from MP3 or other stereo devices.

Warning

1.  Do not connect the power plug into an AC outlet until all connections are made.
2. Remove AC power cord if you do not use this device for a long time.
3. 4. Do not expose the speakers to any dripping or splashing and make sure no object filled with liquids, such as vases, etc., are placed on them.

Symbol for Separate Collection in European Countries

This symbol indicates that this product is to be collected separately.
The following apply only to users in European countries:

• This product is designated for separate collection at an appropriate collection point. Do not dispose of as household waste.

• For more information, contact the retailer or the local authorities in charge of waste management.

Genius web :  www.geniusnet.com
OEM/ODM : www.kyecom.com
KYE Systems Corp.

492, Sec. 5, Chongxin Rd., Sanchong Dist.,

New Taipei City 24160, Taiwan
Tel: 886-2-2995-6645
Fax: 886-2-2995-6649
Email: sim@geniusnet.com.tw
Email: [email protected] (Tech. Support)
http://www.geniusnet.com

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>