Genius GMZM6 Ergonomic Wireless Silent Mouse User Guide
- June 3, 2024
- GENIUS
Table of Contents
Ergo 8200S
Ergonomic Wireless Silent Mouse
Multi-language Quick Guide
Copyright© KYE SYSTEMS CORP.
User Guide
Overview
- Battery life may vary based on user and computing conditions
Hardware Installation
- You can connect the receiver to a USB port of a PC.
- Install one AA battery in the mouse as instructed.
- Make sure that you have switched on the power switch underneath the mouse.
Button definitions:
- Left Button: Provides traditional mouse functions like click double click and drag.
- Right Button: Provides traditional mouse click functions.
- Middle Button: Press the “Middle Button” to surf the Internet and Windows documents.
- Page up: Go to last page of Internet Explorer.
- Page down: Go to next page of Internet Explorer
Warning: (Troubleshooting)
- Do not use the wireless optical/laser mouse on a desk which is made of glass or mirror.
- If you feel the mouse does not move smooth as usual, it is possible the batteries have lost their charge so you need to replace them. Remember to put the batteries in the correct direction.
Symbol for Separate Collection in European Countries
This symbol indicates that this product is to be collected separately.
The following apply only to users in European countries:
-
This product is designated for separate collection at an appropriate collection point.
Do not dispose of as household waste. -
For more information, contact the retailer or the local authorities in charge of waste management.
Federal Communication Commission(FCC) interference statement:
This equipment has been tested and found to comply with the limits of a Class
B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation.This equipment generates uses, and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in particular
installations. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient / Relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio / TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference.and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
FCC CAUTION: Changes or modifications not expressly approved by the
manufacturer responsible for compliance could void the user’s authority to
operate the equipment.
RF exposure warning: The equipment complies with RF exposure limits set forth
for an uncontrolled environment. The antenna(s) used for this transmitter must
not be co-located or operating in conjunction with any other antenna or
transmitter.
You are cautioned that changes or modifications not expressly approved by the
party responsible for compliance could void your authority to operate the
equipment.
Disclaimer
The following does not apply to any country where such provisions are
inconsistent with local law: KYE Systems Corp. makes no warranties with
respect to this documentation, whether expressed or implied. All material is
provided “as is”. This includes, but is not limited to, any implied warranties
of merchantability and fitness is for a particular purpose. The information
covered in this document is subject to change without notice.
KYE Systems Corp. assumes no responsibility for any errors that may appear in
this document.
All brand names mentioned in this manual are trademarks or registered
trademarks of their respective companies.
KYE Systems Corp.
492, Sec. 5, Chongxin Rd., Sanchong Dist.,
New Taipei City 241017, Taiwan
Tel: 886-2-2995-6645
Fax: 886-2-2995-6649
Email: support@geniusnet.com.tw (Tech.
Support)
http://www.geniusnet.com Mouse: Ergo 8200S
FCC ID: FSUGMZM6
Dongle M/N: GM-150036/R
FCC ID: FSUGMZLM
Rating: DC 5V 100mA(Max)
www.geniusnet.com ｜KYE Systems Corp.
MADE IN CHINA
- For actual items, refer to the physical goods contained herein.
- Product storage conditions : Temperature: -20ºC~50ºC / Humidity : 5%~85%.
12030102400-A
Copyright KYE Systems Corp. All rights reserved.