Genius KM-8101 Wireless Keyboard Mouse Combo User Guide
- June 2, 2024
- GENIUS
Table of Contents
- Mouse Button Assignments:
- Hardware Installation:
- Replace Batteries:
- Mouse Button Assignments:
- Hotkeys:
- Function keys:
- 492, Sec. 5, Chongxin Rd., Sanchong Dist.,
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
- 492, Sec, 5, Chongxin RD,. Sanchong Dist., New Taipei City 241017, Taiwan
Genius KM-8101 Wireless Keyboard Mouse Combo User Guide
CE Declaration of Conformity
- The following designated product:
- M/N: Smart KM-8100, Smart KM-8200, KM-8101, KM-XXXX Series, SlimStar XXXX Series is herewith confirmed to comply with the requirements set out in the Council Directive on the Approximation of the Laws of the Member States relating to Radio Equipment Directive For the evaluation regarding the electromagnetic compatibility, the following stander were applied
- EN 300328/ EN 301 489-1 / EN 300328/ EN 301 489-1 / EN 300328/ EN 301 489-1 / EN 300328/ EN 301 489-1
- This declaration is prepard for the manufacturer KYE SYSTEMS CORP,
492, Sec, 5, Chongxin RD,. Sanchong Dist., New Taipei City 241017, Taiwan
(R.O.C)
Federal Communication Commission interference statement:
This equipment has been tested and found to comply with the limits of a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in particular
installations. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
Reorient/ Relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
Consult the dealer or an experienced radio / TV technician for help.
FCC CAUTION:
Changes or modifications not expressly approved by the manufacturer
responsible for compliance could void the user’s authority to operate the
equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
RF exposure warning: The equipment complies with RF exposure limits set forth
for an uncontrolled environment. The antenna(s) used for this transmitter must
not be
co-located or operating in conjunction with any other antenna or transmitter.
You are cautioned that changes or modifications not expressly approved by the
party responsible for compliance could void your authority to operate the
equipment.
Disclaimer
The following does not apply to any country where such provisions are
inconsistent with local law:
KYE Systems Corp. makes no warranties with respect to this documentation,
whether expressed or implied. All material is provided “as is”. This includes,
but is not limited to, any implied warranties of merchantability and frtness
is for a particular purpose. The information covered in this document is
subject to change without notice.
KYE Systems Corp. assumes no responsibility for any errors that may appear in
this document.
All brand names mentioned in this manual are trademarks or registered
trademarks of their respective companies.
Copyright© KYE Systems Corp. All rights reserved.
The frequency band of product is 2400 MHz – 2483.5 MHz and the radio-frequency
transmitted maximum power (equivalent isotropic radiated power, EIRP) less
than 10 mW.
Operating temperature: O – 40°C
Product storage conditions: Temperature: -20°C ~ 50°C / Humidity: 5%~ 85%
-
Remove the battery cover from the mouse.
Install one AA battery into the mouse. -
Remove the battery cover from the keyboard.
Install one AA battery into the keyboard.
Mouse Button Assignments:
- Left Button: Provides traditional mouse functions like click, double click and drag.
- Magic-Roller: Scroll the button to surf the Internet and Windows documents.
- Right Button: Provides traditional mouse right click function.
Replace Batteries:
If the mouse or keyboard does not work properly, then the batteries have lost
their charge, so you need to replace them.
Warning: do not mix or use different types of batteries at the same time.
Notes on Battery Usage:
When you use the battery, carefully read and strictly observe the Safety
Instructions and the notes described below:
- Different battery types and surrounding temperatures may affect the battery performance.
- Avoid using batteries in extremely cold environments as low temperatures can shorten the
- battery life and reduce wireless device performance.
- If you are using a new rechargeable battery or rechargeable battery that has not been used for an extended period of time (batteries that pass the expiry date are exceptions) it might affect the period of time according to local regulations.
- you can use this device. Therefore, to maximize their performance and lifetime, we recommend that you fully charge the batteries and discharge them for at least one complete cycle before use.
- The battery or wireless device may feel wann when using for an extended period of time.
- This is nonanal and not a malfunction.
- If you will not be using the batteries for an extended period of time, remove them from the wireless device to prevent leakage or corrosion.
- Always keep the terminals in a clean state.
- Risk of explosion if battery is replaced by an incorrect type.
- Dispose of used batteries according to local regulations.
Hardware Installation:
- Install one AA battery into the mouse and one AA battery into the keyboard.
- Remove the Pico receiver from the mouse and plug it into a USB port on your PC.
Replace Batteries:
If the mouse or keyboard does not work properly, then the batteries have lost
their charge, so you need to replace them.
Warning: do not mix or use different types of batteries at the same time.
Mouse Button Assignments:
- Left Button: Provides traditional mouse functions like click, double click and drag.
- Magic-Roller: Scroll the button to surf the Internet and Windows documents.
- Right Button: Provides traditional mouse right click function.
Hotkeys:
Function keys:
KYE Systems Corp.
492, Sec. 5, Chongxin Rd., Sanchong Dist.,
New laipei City 241017, ldlWdn
Tel: 886-2-2995-6645
Fax: 886-2-2995-6649
Email: support@geniusnetcom.tw (Tech.
Support)
http://www.geniusnet.com
- For actual items, refer to the physical goods contained herein.
- Product storage conditions: Temperature: -20C~50C / Humidity : 5% ` 85%.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>