ANKO Christmas Star Wand Controller Installation Guide

ANKO Christmas Star Wand Controller

Product Information

Specifications

• Product Name : ANKO Christmas Star Wand Controller
• Power Source : 2 x AAA batteries (not included)
• Wireless RF receiver included

Product Usage Instructions

Installation and Pairing

1. Plug your Low voltage power adaptor to the end marked with In.
2. Connect your string lights to the end marked with Out.
3. Plug the adaptor into the wall power outlet and switch on the power outlet.
4. Wait for the string lights to blink 3 times (this may take 5 seconds to 1 minute depending on the brand and model of your string lights).
5. Turn the switch on the wand to the ON position, then flick the magic switch ON/OFF to complete the pairing process.
6. NOTE: You will need to repeat this pairing process each time you turn off the main power supply to the low-voltage power adaptor.

FAQ

• Q: Do I need to purchase batteries separately for the wand controller?
  • A: Yes, you will need 2 x AAA batteries for the wand controller, which are not included in the package.
• Q: Where is the wand controller manufactured?
  • A: The wand controller is made in China.

ANKO Christmas Star Wand Controller

The Christmas Magical Star Wand Controller is a simple and fun solution to turning on and off your Christmas tree lights with a quick flick of the wand.

Installation and pairing

1. Plug your Low voltage power adaptor to the end marked with In.
2. Plug your sting lights to the end marked with Out. Plug the adaptor to the wall power outlet and turn the wall power outlet switch on.
3. Please Wait for the string light start to blink 3 times (this can be 5 seconds to 1 minute depending on the brand and model of your string lights)
4. turn the switch on the wand to the ON position, now flick the magic switch ON/OFF to finish the pairing process. NOTE: you need to repeat this pairing process each time you turn off the main power supply to the low-voltage power adaptor.

Enjoy the luxury of having your kids control your Christmas tree lights. Please allow 5 seconds between engaging and disengaging the lights.
WARNING: 240V mains power adaptor and wand must remain indoors at all times.

CAUTIONS

1. Only use the batteries specified and be sure to match the + – polarity signs
2. Do not mix Alkaline, standard Carbon-zinc or rechargeable nickel cadmium batteries.
3. Do not mix old and new batteries
4. Remove exhausted or dead batteries from the product
5. Remove batteries if the product is not to be used for a long time
6. Do not dispose of the batteries in the fire. Batteries may explode or leak.
7. Keep the batteries away from children, if swallowed seek for medical attention immediately

FAQ

• Q: Why does the wand controller no longer work or lose the sound function?

  • A: when the battery is low, it may not have then enough power to send the ON/OFF signal to the receiver or play the sound effect, We suggest you replace the battery with premium batteries such as Duracell or Energizer
    Q: I have brand new batteries but it doesn’t seem to be able to turn the Christmas light on/off?

  • A : this means the wand controller is not paired/disconnected with the wireless RF receiver, please turn off the main power supply to the low voltage adaptor, wait for 5 minutes, then power on and follow the installation and pairing process.

All trademarks are used for reference purposes only. Made in China

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>