YITAHOME FTBFBF-0102 King Size Bed Frame Instruction Manual
- June 17, 2024
- YITAHOME
Table of Contents
YITAHOME FTBFBF-0102 King Size Bed Frame
Product Specifications :
- Model : FTBFBF-0102
- Version : JXFY-V1
- Assembly : Requires two or more people, electric drill recommended
- Professional installation recommended
Product Usage Instructions
-
Step 1: Locking and Assembly
Ensure you have all the necessary components as listed in the manual. -
Follow the directions to lock the plastic pieces together to form the base.
-
Step 2: Drawer Assembly
Place the round iron tube in the indicated position for better drawer assembly. -
Step 3: Frame Assembly
Follow the diagram to assemble the frame components in the correct order. -
Step 4: Attaching Headboard and Footboard
Loosen the screws on the headboard side leg and footboard. Attach the brackets and tighten the screws. -
Step 5: Final Adjustments
Adjust the legs as needed for stability.
Frequently Asked Questions (FAQ):
-
Q: Can I assemble this product alone?
A: No, it is recommended to have two or more people for assembly. -
Q: What tools are recommended for assembly?
A: An electric drill is recommended for tightening bolts to avoid squeaking. -
Q: Can I install this product without professional help?
A: While professional installation is recommended, following the manual carefully can help you assemble the product on your own.
FTBFBF-0102
JXFY-V1
-
Two or more people are required for assembly.
-
To avoid squeaking, please tighten the bolts all the way.
An electric drill is recommended for the assembly. -
Professional installation is highly recommended.
INSTALLATION STEPS
Take note that the middle crossbeam, indicated by the red arrow, represents
the front. 
Loosen the screw of the headboard side leg and both sides of the footboard. Hang the bracket and tighten the inner screw.
Loosen the screw of the headboard side leg and both sides of footboard. Hang
the bracket and tighten the inner screw. 
- Fits a 10 inch thick mattress when attaching screws to these holes
- Fits a 12 inch thick mattress when attaching screws to these holes.
Hang the drawer panel screw into side cross beam hole.
Assemble step5 into step15.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>