Ansell 4L5-1006-7-8 Luminaires Instruction Manual
- October 30, 2023
- Ansell
Table of Contents
Ansell 4L5-1006-7-8 Luminaires
Product Information
The Ansell luminaires are electrical products used for lighting purposes. They come with a warranty period during which the manufacturer will repair or replace any faulty products. The warranty details can be obtained from the local representative or the Ansell website.
It is recommended that only qualified electricians should install and maintain
the Ansell luminaires. The wiring should be in accordance with the latest IEC
standards or national equivalent.
The mains power must be switched off during installation and maintenance to
prevent electrical hazards.
Ansell does not take responsibility for any installation costs associated with the replacement of the product.
Product Usage Instructions
- Only qualified electricians should install and maintain the Ansell luminaires.
- Before installation or maintenance, switch off the mains power to prevent electrical hazards.
- The wiring should be in accordance with the latest IEC standards or national equivalent.
- If the product fails during the warranty period, contact the local representative or visit the Ansell website for repair or replacement.
- Ansell does not take responsibility for any installation costs associated with the replacement of the product.
Warranty Information
- For warranty details please contact your local representative or visit our website: www.anselluk.com
- It is highly recommended that all Ansell luminaires are installed / maintained by a fully qualified electrician and wired in accordance to the latest IEC standards or national equivalent.
- Mains power must be switched off during any installation or maintenance.
- Should the product fail during the warranty period, Ansell will repair or replace the product in question.
- Ansell do not accept any responsibility for any installation costs associated to the replacement of this product.
- Please Note – The warranty period shall be null and void in the following circumstances:
Failure by the installer, end user or any third party to exercise caution to protect any covered product or part from outside damage, adverse temperature, humidity conditions, fluctuations in the electrical system or physical abuse as well as failure related to poor workmanship in the installation of the products or parts. Inability to provide correct product information. Any questions or concerns with the product, please contact your local representative.”
Warning
Symbols
Power off
Tools
Installation
Power on
Ansell Electrical Products
Unit 6B, Stonecross Industrial
Park,
Yew Tree Way,
Warrington,
WA3 3JD
Warrington Tel: +44 (0)1942 433333
Ansell (Sales & Distribution)
Unit 2, M2 Business Park,
Duncrue Street,
Belfast,
BT3 9AQ
Belfast Tel: +44 (0)2890 773750
Ansell (Sales & Distribution) Republic of Ireland Limited
Unit G1, Block G,
Calmount Park, Calmount Avenue
Dublin 12,
D12 TH56
International Tel: +44 (0)1942 433343
Spain Tel: 00 34 938 005642
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>