Ansell 4L4-1010 Luminaires Instruction Manual

: October 30, 2023
: Ansell

Table of Contents

4L4-1010 Luminaires
Product Information
Product Usage Instructions
Warranty Information
ABOUT COMPANY
INSTALLATION INSTRUCTION
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

4L4-1010 Luminaires

Product Information

Ansell luminaires are electrical lighting fixtures designed for indoor and outdoor use. The product code for this specific luminaire is 4L4/1010 with legends 4L4/1011, 1012, and 1013. The product is covered by a warranty that can be obtained by contacting your local representative or visiting the website www.anselluk.com. Ansell recommends that the installation and maintenance of all luminaires are done by a qualified electrician in accordance with the latest IEC standards or national equivalent. The mains power must be switched off during any installation or maintenance.

Product Usage Instructions

Ensure that the mains power is switched off before installing or maintaining the luminaire.
Hire a fully qualified electrician to install or maintain the luminaire.
Ensure that the wiring is in accordance with the latest IEC standards or national equivalent.
To turn off the luminaire, switch it to position 1, 2, or 3. To turn it on, switch it to position 5, 6, or 7.
If the product fails during the warranty period, contact Ansell to repair or replace the product.
Ansell does not cover any installation costs associated with the replacement of the product.

Warranty Information

For warranty details please contact your local representative or visit our website: www.anselluk.com
It is highly recommended that all Ansell luminaires are installed / maintained by a fully qualified electrician and wired in accordance to the latest IEC standards or national equivalent.
Mains power must be switched off during any installation or maintenance.
Should the product fail during the warranty period, Ansell will repair or replace the product in question.
Ansell do not accept any responsibility for any installation costs associated to the replacement of this product.
“Please Note – The warranty period shall be null and void in the following circumstances:
Failure by the installer, end user or any third party to exercise caution to protect any covered product or part from outside damage, adverse temperature, humidity conditions, fluctuations in the electrical system or physical abuse as well as failure related to poor workmanship in the installation of the products or parts. Inability to provide correct product information. Any questions or concerns with the product, please contact your local representative.”
The light source contain e<J in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person
If the external flexible cable or cord of1his luminaire is damaged, it shall be exclusively , replaced by the manufacturer O( his service agent or a similar qualified person in order to avoid a hazzard
The battery in this appliance can be replaced, but should only be undertaken by qualified personnel.
If after the full three-hour duration test the appliance does not meet the rated duration then either the battery or whole fitting must be replaced. For more advice please contact your local representative.