Ansell LIGHTING AKLP-1 Kala 40W CCT Selectable Round LED Panel Instruction Manual
- May 15, 2024
- Ansell LIGHTING
Table of Contents
Ansell LIGHTING AKLP-1 Kala 40W CCT Selectable Round LED Panel
Specifications
- Product Code: AKAL1/2/
- Issue Number: 1
Product Information
- Ansell luminaires must be installed and maintained by a fully qualified electrician. Wiring should adhere to the latest IEC standards or national equivalent.
- Main power must be switched off during installation or maintenance.
- If the product fails during the warranty period, Ansell will repair or replace it. However, installation costs are not covered by Ansell.
Product Usage Instructions
Installation
- Ensure mains power is switched off before starting the installation.
- Follow the latest IEC standards or national equivalent for wiring.
- If unsure, contact a qualified electrician for installation.
Maintenance
Regular maintenance is essential to ensure the longevity of the product. Follow these steps:
- Switch off mains power before conducting any maintenance.
- Clean the luminaire regularly to prevent dust buildup.
- Check for any loose connections or damaged parts and address them promptly.
FAQ
Q: What should I do if the product fails outside the warranty period?
A: If the product fails outside the warranty period, contact Ansell customer support for assistance. Repair or replacement may be available for a fee.
Q: Can I install the luminaire myself?
A: It is highly recommended to have a qualified electrician handle the installation to ensure safety and compliance with standards.
Warranty Information
- For warranty details please contact your local representative or visit our website: www.anselluk.com
- It is highly recommended that all Ansell luminaires are installed / maintained by a fully qualified electrician and wired in accordance to the latest IEC standards or national equivalent.
- Mains power must be switched off during any installation or maintenance.
- Should the product fail during the warranty period, Ansell will repair or replace the product in question.
- Ansell do not accept any responsibility for any installation costs associated to the replacement of this product.
- “Please Note – The warranty period shall be null and void in the following circumstances:
- Failure by the installer, end user or any third party to exercise caution to protect any covered product or part from outside damage, adverse temperature, humidity conditions, fluctuations in the electrical system or physical abuse as well as failure related to poor workmanship in the installation of the products or parts. Inability to provide correct product information. Any questions or concerns with the product, please contact your local representative.”
- The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person.
- If the external flexible cable or cord of this luminaire is damaged, it shall be replaced by a special cord or cord exclusively available from the manufacturer or the local service agent.
Installation Instructions
Product Code :[AKAL1/ 2/]
Ansell Electrical Products
Unit 6B, Stonecross Industrial Park, Yew Tree Way, Warrington, WA3 3JD
Warrington Tel: +44 (0)1942 43333
Ansell (Sales & Distribution)
Unit 2, M2 Business Park, Duncrue Street, Belfast, BT3 9AQ
Belfast Tel: +44 (0)2890 77375C
Ansell (Sales & Distribution) Republic of Ireland Limited
Unit G1, Block G, Calmount Park, Calmount Avenue Dublin 12, D12 TH56
International Tel: +44 (0)1942 433343
C Spain Tel: 00 34 938 005642
Issue Number: [1]
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>