Ansell LIGHTING Octo Wiz A60 Smart Tunable White Dimmable LED Lamp E27 8W Installation Guide
- June 6, 2024
- Ansell LIGHTING
Table of Contents
Lighting
INSTALLATION INSTRUCTIONS
Wireless specification:
Wireless RF mode frequency band: 2400 – 2483.5 MHz
Maximum transmitter power: 20 dBm
Operating channels W-Fi: 13/9 channels
Operating channels Bluetooth: 40 channels
Products shall not be used with dimmers, for dimming use the WIZ application.
On/off functionality available without VVi-Fi connectivity. Wi-Fi is a
registered trademark of Wi-Fi Alliance° WPATM is trademark of Wi-Fi Alliance.
WPA2m is a trademark of Wi-Fi. The Wi-Fi CERTIFIED TM Logo is a certification
mark of Wi-Fi. Amazon, Alexa, and all related logos are trademarks of
Amazon.com, Inc or its affiliates. Google is a trademark
of Google LLC. Siri is a registered trademark of Apple Inc. The Bluetooth word
and logos are registered trademarks owned by Bluetooth SIG, INC.
Hereby, [WiZ Connected Lighting Co., Limited] declares that the radio
equipment type [WIZ Performance lamps] is in compliance with Directive
2014/53/EU. The full text of the EU declaration of conformity is available at
the following internet address: wizconnected.com
QUICKSTART GUIDE
INSTALL YOUR PRODUCT(S)
STEP ONE
STEP TWO
DOWNLOAD THE OCTO APP
For Installation videos, FAQs access to the WIZ App, and much more.
STEP THREE
FOLLOW THE EASY GUIDE ON THE APP
ENJOY YOUR CONNECTED LIGHTS
Get inspiration & tutorials in the Octo app.
STEP FOUR
TROUBLESHOOTING
My lights won’t pair in the WiZ Connected App.
For an optimal pairing experience with OCTO WiZ Connected products, make sure
your WiFi router is operating on 2.4GHz or alternatively follow the in-App
support to pair the products manually or chat with the support team.
Check that the lamp or bulb is within Wi-Fi range.
Check that your phone is connected to the 2.4 GHz Wi-Fi on your home
router.
You can switch back to 5 GHz after pairing is done.
Follow the prompts on your app screen.
How do I make sure my lights are in pairing mode?
When you repeatedly power ON your light, it should start to pulse in blue
(color light) or white (tunable white or dimmable light). The pulsing means
your light is ready to pair. white (tunable white or dimmable light). The
pulsing means your light is ready to pair.
If no light is found, try Manual Setup
I am not sure how to connect to the 2.4 GHz network. What should I do?
Tap on ‘Try manual setup’. Wait for the next screen to open and follow the
instructions, which will make you open the Wi-Fi settings of your phone and
connect to Wi-Fi:
“WiZConfig_XXXX”
When the light is in ‘Manual Setup’ mode and emits a Wi-Fi signal, it will
pulse in purple (color light) or white (tunable white or dimmable light).
(color light) or white (tunable white or dimmable light).
Still, having a problem? Contact the support team via in-app chat.
Warning: Dimmer switches are not supported by WiZ lights and may damage the
product.
If you want to use it regardless, make sure the dimmer is at 100%.
Tip! Metallic/enclosed shades or fixtures may hamper connectivity.
AnseII Electrical Products
Unit 6B, Stonecross Industrial Park,
Yew Tree Way,
Warrington,
WA3 3JD @Warrington Tel: +44 (0)1942 433333
AnseII (Sales & Distribution
Unit 2, M2 Business Park,
Duncrue Street,
Belfast,
BT3 9AQ
Belfast Tel: 4-44 (0)2890 773750
°International Tel: 4-44 (0)1942 433343
www.anselluk.com
0 Spain Tel: 00 34 938 005642
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>