PANDUIT CD-920H-2 Pan Lug Crimp Dies Instruction Manual

CD-920H-2 Pan Lug Crimp Dies

THIS COPY IS PROVIDED ON A RESTRICTED BASIS AND IS NOT TO BE USED IN ANY WAY DETRIMENTAL TO THE INTERESTS OF PANDUIT CORP.
INSTRUCTIONS FOR THE MEASUREMENT OF
RAISED AND RECESSED STYLE CD-920 STYLE CRIMP DIES

Please follow the steps below for measurment of the CD-920 series crimp dies.

STEP ONE
Please select the correct Crimp Die set for the application that you will be checking. Wipe die set clean.

NOTES:

• CD-920 CRIMP DIES WITH QC #’S AT OR HIGHER THAN 13287938L, WILL HAVE RAISED DIE INDEX NUMBERS IN DIE POCKET.
• CD-920 CRIMP DIES WITH QC #’S LOWER THAN 13287938L, WILL HAVE ENGRAVED DIE INDEX NUMBERS IN THE DIE POCKET.

STEP TWO
Ensure crimp die halves are touching and aligned as shown below.

STEP THREE
Measure crimp die diameter by placing caliper in ridges as shown below.

See sheet 4 for appropriate die diameter range.
If dies are measured outside of the acceptable range, contact the Panduit sales office.

CRIMP DIE
PART NUMBER| DIE COLOR CODE| DIE INDEX
NUMBER| RAISED AND RECESSED LETTER CRIMP DIES
DIE DIAMETER RANGE
MIN. – MAX.
---|---|---|---
CD-920-8| RED| P21| 1.536″ – 1.606″
CD-920-6| BLUE| P24| 1.536″ – 1.606″
CD-920-4| GREY| P29| 1.536″ – 1.606″
CD-920-2| BROWN| P33| 1.536″ – 1.606″
CD-920-1| GREEN| P37| 1.536″ – 1.606″
CD-920-1/0| PINK| P42| 1.536″ – 1.606″
CD-920-2/0| BLK/GLD| P45| 1.536″ – 1.606″
CD-920-3/0| ORN/TAN| P50| 1.536″ – 1.606″
CD-920-4/0| PUR/OLV| P54| 1.536″ – 1.606″
CD-920-250| YEL/RBY| P62| 1.536″ – 1.606″
CD-920-300| WHITE| P66| 1.536″ – 1.606″
CD-920-350| RED| P71| 1.536″ – 1.606″
CD-920-400| BLUE| P76| 1.536″ – 1.606″
CD-920-500| BROWN| P87| 1.536″ – 1.606″
CD-920-500A| PINK| P99| 1.262″ – 1.332″
CD-920-600| GREEN| P94| 1.536″ – 1.606″
CD-920-750| BLACK| P106| 1.262″ – 1.332″
CD-920H-6| ORANGE| PH6| 1.518″ – 1.588″
CD-920H-2| BROWN| PH2| 1.518″ – 1.588″
0| 4/18/23| JHNU| JHNU| MRWA| SEE SHEET 1 FOR DRAWING REVISIONS|
---|---|---|---|---|---|---
REV| DATE| BY| CHK| APR| DESCRIPTION| ECN
TITLE
CD-920 SERIES CRIMP DIE MEASUREMENT INSTRUCTIONS
CUSTOMER DRAWING

ITEM REVISION NAME
03249NBF/00|
DATASET FILE NAME
03249NBF-DC/00
UNLESS OTHERWISE SPECIFIED,
DIMENSIONAL TOLERANCES ARE: IN [mm]
.X: .1 [2.54] .XX: .01 [.25] .XXX: .005 [.127] ANGLES: 1
THIRD ANGLE PROJECTION| MATERIAL:
NONE
DRAWING NUMBER:
03249NBF-DC
DRAWN BY
JHNU| DATE
4/18/23| CHK
MRWA| SCALE
NONE| SHT 4 OF 4| SIZE
B

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>