Hodonas B0BS976T5Q Rolling Laundry Basket Organizer with Wheels Instruction Manual

Hodonas B0BS976T5Q Rolling Laundry Basket Organizer with Wheels Instruction Manual

If you find any damage, missing parts, or dissatisfaction after receiving the product, please feel free to contact us the first time, we will provide you with a 100% satisfactory solution.

Contents

• A-Shelf x 2
  
  

• **B-Bottom Pole x 4

**

• **C-Middle Pole x 4

**

• **D-Top Pole x4

**

• **E-Zigzag Bar x 2

**

• **F-Hanger x 2

**

• **G-Joint Clips x 32

**

• **H-Caster Wheel x 2set

**

• **1-Wrench x 1

**

• **J-Hanging Bar x 1

**

• **K-Hanging Rib x2

**

• **L-Screw x 2

**

• **M- Laundry bag x 3

**

Assembly Steps

a. The joint clip (G) should fit into the single coils (attach two clips to the rod 1-2″ above the chosen single coil, then slide the clip down until it clicks. This means the clip is correctly in place on the pole).
b. Arrows on the clips should be pointing upwards.

1. Use wrench (1) to screw the caster wheel(H) into each bottom pole (B) and lockking wheels(H).
   To ensure better stability of the product when locked, place both locking wheels(H) along the same longer edge of the product.
   

2. Place two joint clips (G) into the appropriate groove on each bottom pole (B) as above (8 joint clips in total). Ensure the arrows on the clips are facing upward. Gently slide down one shelf (A) through the bottom pole (B) until it fits firmly against all the joint clips (G). Ensure that it is no more than 6 inches from the floor.
   Note: The joint clips (G) for each pole must be at the same height.
   

3. Screw the Middle Pole (C) Screw the Middle Pole (C) to the Bottom Pole (B).
   

4. Assemblling Zigzag Bar (E). Choose the location of Zigzag Bar(E) based on the height of the laundry bag(M). Repeat the step 2 to assemble the Zigzag Bar(E).

5. Assembling Top Pole(D) Screw the Top Pole(D) to the Middle Pole (C)

6. Assembling Hanger(F). Repeat step 2 to place joint clips (G) and slide down the Hanger (F)

7. Assembling the top shelf (A) Repeat step 2

8. Assembling Hanging Bar(J) Align the ends of the Hanging Bar (J) with the Hanging Rib (K) and use the Screw (L) to lock the Hanging Bar(J). Place the Hanging Bar (F) onto the center of the Shelf (A).
   

9. Assembling Laundry Bag (M)

CAUTION
Do not allow children to climb or play in or around the shelf.

Safety Information

1. Recommended to assemble on a soft surface, such as carpet, to prevent scratching the floor finish.
2. The black circular plastic pieces are just for protecting component parts from damage during shippin

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>