nVent CADDY 150M0200S4 150M Standard U Bolt Owner’s Manual
- June 17, 2024
- nVent Caddy
Table of Contents
nVent CADDY 150M0200S4 150M Standard U Bolt Owner’s Manual
CATALOG NUMBER
FEATURES
Pipe support for general piping applications
Comes complete with 4 nuts (2 installed on each end)
Conforms with Federal Specification WW-H-171 (Type 24), Manufacturers
Standardization Society ANSI®/MSS-SP-58 (Type 24)
PRODUCT ATTRIBUTES
Material: Stainless Steel 304 (EN 1.4301)
Pipe Size: 2″
Outer Diameter: 60.3 mm
Rod Size: 3/8″
Screw Length: 63.5 mm
A: 122.38 mm
B: 69.9 mm
Static Load: 4800 N
DIAGRAMS
WARNING
nVent products shall be installed and used only as indicated in nVent’s
product instruction sheets and training materials. Instruction sheets are
available at www.nvent.com and from your nVent
customer service representative. Improper installation, misuse, misapplication
or other failure to completely follow nVent’s instructions and warnings may
cause product malfunction, property damage, serious bodily injury and death
and/or void your warranty.
North America
+1.800.753.9221
Option 1 – Customer Care
Option 2 – Technical Support
Europe
Netherlands:
+31 800-0200135
France:
+33 800 901 793
Europe
Germany:
800 1890272
Other Countries:
+31 13 5835404
APAC
Shanghai:
+ 86 21 2412 1618/19
Sydney:
+61 2 9751 8500
Our powerful portfolio of brands:
nVent.com
CADDY
ERICO
HOFFMAN
RAYCHEM
SCHROFF
TRACER
© 2024 nVent. All nVent marks and logos are owned or licensed by nVent
Services GmbH or its affiliates. All other trademarks are the property of
their respective owners.
nVent reserves the right to change specifications without notice.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>