Baby Trend BC20xxxA/B Trend EZ Bouncer Instruction Manual

Baby Trend BC20xxxA/B Trend EZ Bouncer

Specifications

• Not intended for infant sleep
• Maximum Weight Capacity: 20 lb (9 kg)
• Adult assembly required

Assembly

1. Inspect all parts to ensure nothing is damaged or missing.
2. Follow the assembly instructions carefully.
3. Tighten all screws and connectors securely.

Maintenance
Regularly check for loose screws, worn parts, or torn material.
Replace or repair parts as needed.

Usage
Place the bouncer on a flat, stable surface away from hazards.
Always supervise the baby while using the bouncer.

WARRANTY

DO NOT RETURN YOUR PRODUCT TO THE STORE. PLEASE CONTACT
BABY TREND® FOR REPLACEMENT PARTS, SERVICE AND REPAIR.
The Baby Trend® warranty covers workmanship defects within 1 year of purchase. Any product which has been subjected to misuse, abuse, abnormal use, excessive wear and tear, improper assembly, negligence, environmental exposure, alteration or accident, or has had its serial number altered or removed invalidates all claims against the manufacturer. Any damage to property during installation is the sole responsibility of the end user.
Customer Service Department can be contacted at 1 800-328-7363 Monday through Friday between 8:00 a.m. and 4:30 p.m. (PST). Return Authorizations are required prior to returning product(s) to Baby Trend®. Please visit http://babytrend.com/pages/limited-warranty for complete warranty details.

GARANTIA
NO DEVUELVA SU PRODUCTO A LA TIENDA. POR FAVOR CONTACTE A
BABY TREND® PARA PIEZAS DE REPUESTO, SERVICIO Y REPARACION.
La garantía de Baby Trend® cubre defectos de fábrica por 1 año después de la compra. Cualquier producto que haya sido sometido a uso inadecuado, abuso, uso anormal, desgaste excesivo, montaje incorrecto, negligencia, exposición ambiental, alteración o accidente, o cuyo número de serie haya sido alterado o removido, anula todos los reclamos contra el fabricante. Cualquier daño a la propiedad durante la instalación es la exclusiva responsabilidad del usuario final.
El Departamento de Servicio al Cliente está disponible llamando al 1 800-328-7363, de lunes a viernes de 8:00 a.m. a 4:30 p.m. (PST). Se requiere una Autorización de Devolución antes de poder devolver el o los productos a Baby Trend®. Visite http://babytrend.com/pages/limited-warranty para conocer todos los detalles de la garantía.
Baby Trend, Inc. 13048 Valley Blvd. Fontana CA 92335
1-800-328-7363 • (8:00am ~ 4:30pm PST)
www.babytrend.com

WARNING! Not intended for infant sleep and should never be used for this purpose.
FALL HAZARD: Babies have suffered skull fractures falling while in and from bouncers.

• Use boubncer ONLY on floor.
• ALWAYS use restraints. Adjust to fit snugly.
• NEVER lift or carry baby in bouncer.
• SUFFOCATION HAZARD: Babieshave suffocated when bouncers tipped over on soft surfaces and/or when bouncers have been used as a sleep product.
• NEVER use on a bed, sofa, cushion, or other soft surface.
• Stay near and watch baby during use. This product is not safe for sleep or unsupervised use.
• If baby falls asleep, remove baby as soon as possible and place baby on a firm, flat sleep surface such as a crib or bassinet.

TO PREVENT FALLS AND SUFFOCATION:

• ALWAYS use restraints. Adjust to fit snugly.
• STOP using bouncer when baby starts trying to sit up or has reached 20 lb (9 kg), whichever comes first.
• Toy bar is NOT designed to be used to as a carry handle.
• NEVER use on any elevated surface.
• NEVER leave baby unattended.
• NEVER Allow your bouncer to be used as a toy.
• NEVER move bouncer with the child inside.
• NEVER substitute parts.
• Bouncer is NOT intended for use as a carrier.

Check your bouncer for loose screws, worn parts, torn material or stitching on a regular basis.Replace or repair parts as needed.
Discontinue use of the bouncer should it malfunction or become damaged.
IMPORTANT: Adult assembly required. Care should be taken in unpacking and assembly. Examine product frequently for damage, missing or loose parts. DO NOT use if any parts are missing, damaged or broken. Contact Baby Trend for replacement part and instructions if needed. Dial 800-328-7363

PARTS

Check that you have all the parts for this model before assembling the bouncer.

• IMPORTANT! To ensure safe operation of your bouncer, please follow these instructions carefully. Please keep these instructions for future reference.
• IMPORTANT! Before assembly and each use, inspect this product for damaged hardware, loose joints, missing parts or sharp edges. NEVER use if any parts are missing or broken.
• IMPORTANT! Adult assembly is required.
• ¡IMPORTANTE! Para asegurar el funcionamiento seguro de su rebotador, siga estas instrucciones cuidadosamente. Por favor, conserve estas instrucciones para referencia futura.
• ¡IMPORTANTE! Antes del montaje y de cada uso, inspeccione el producto para detectar daños en el equipo, uniones sueltas, piezas faltantes o bordes filosos. NUNCA use el carrito con piezas faltantes o rotas.
• ¡IMPORTANTE! Se requiere el montaje por parte de un adulto.

ASSEMBLY

1. Place the rear base frame tube on a flat surface (Fig. 1a) and lift the plastic corners (Fig. 1b). Insert the left and right base frame wires into the rear base frame tube. Push the plastic corners back down until they snap securely onto the base frame wires (Fig. 1c). Set the assembled Base frame aside and proceed to step 2.
   Coloque el tubo del armazón de la base trasera sobre una superficie plana (Fig. 1a) y levante las esquinas de plástico.
   (Fig. 1b) Introduzca los alambres derecho e izquierdo del armazón de la base en
   el tubo del armazón de la base trasera. Empuje la s esquinas de plástico hacia atrás y abajo hasta que se fijen bien a presión en los alambres del armazón de la base (Fig. 1c). Deje a un lado la estructura de la base ensamblada y proceda con el paso 2.

2. Reference the 3-Way Connector Diagram below for Steps 2 and 3.

   • Use de referencia el Diagrama del Conector de 3 Vías a continuación para los pasos 2 y 3.
   • The 3-Way Connectors will be preassembled at corner A (Fig 2a). Place the Base frame upright on a flat surface with corners B and C of the 3-Way Connectors pointing up (Fig. 2b). The Backrest Bar has 2 square brackets with anopening for the Toy Bar. Be sure that the openings are facing up (Fig 2b). Align the Backrest bar to corner B. Insert both ends into the 3-Way connector until they click into place (Fig 2c).
   • DO NOT Discard the Foam Padding from the Footrest Wire (Fig 2d).
   • To Insert the Footrest Wire, align the ends to corner C of the 3-Way Connector.Be sure the small curvature parallels with the surface and the ends of the wire both point up (Fig 2d). Insert the ends into the 3-Way Connectors and be sure that they click into place. NOTE: The pins on the 2 Bars must click into position when inserted into the connectors correctly (Fig. 2e).
   • Los conectores de 3 vías estarán ensamblados previamente en la esquina
     

3. The completed frame assembly should look exactly as what is shown in (Fig 3).

4. For safety and assurance check that the screw on the 3-Way Connector is tightened on both sides (Fig. 4).

5. Bouncer frame assembly is complete (Fig. 5).
   

Battery Installation

The music/vibration unit requires two size C batteries (not included). It is recommended that you use alkaline batteries for longer battery life.

CAUTION: To prevent possible battery leakage, besure to follow the guidelines outlined below.

• Do not mix old and new batteries.
• Do not mix different types (alkaline, standard, or rechargeable).
• Keep batteries out of reach of children.
• Always dispose of batteries properly.
• Remove batteries when the bouncer is not in use for long periods of time.
• Never leave exhausted batteries in the unit.
•  Never try to recharge non-rechargeable batteries.

Remove the battery cover using a Philips screwdriver (Fig. 6). Install two size C batteries and replace the battery cover. Do not overtighten the screw.

• Align the mounting groove on the unit to the corresponding slot on Footrest wire. Slide the unit onto the mounting groove until it is securely in place (Fig. 7).

• Unbuckle the straps on the back of the seat pad (Fig. 8).

• Slide the top of the seat pad over the backrest tube (Fig. 9).

• Pull the front edge of the seat pad over the music/vibration unit and then pull each side of the seat pad over the footrest wire until it fits snugly over the bouncer frame
  (Fig 10a).
  • Follow the three illustrated steps to cover the Music/Vibration Unit and Footrest wire (Fig. 10b). The covered bouncer should have the cover wrapped nicely all around the upper frame assembly (Fig. 10c)..

• Secure the seat pad to the frame by buckling the straps on the back of the pad (Fig. 11). Place the bouncer back in the upright position.

• Position the toy bar above the bouncer as  shown (Fig. 12a). Insert the ends of the toy bar through the corresponding holes in the seat pad and into corresponding holes on the frame. Push in until both sides click into place. To remove, press the release clips and pull up (Fig. 12b).
  

•  To hook the Headrest to the Bouncer, use the adjustable hook and loop strap. Thread it from front to back through the headrest hoop. To adjust detach and attach the hook and place it at your desired height (Fig. 13).

• If buckled, unbuckle the straps on each side of the seat restraint (Fig. 14a)
  Carefully place the child in the bouncer seat and buckle the straps (Fig. 14b). Adjust the straps so that the restraint fits the child snugly (Fig. 14c)..

• Remove the seat pad and headrest from the frame. Ensure that all buckles on the seat pad are fastened. Do not iron. Do not dry clean.
•  Instructions:
  • WASHING INSTRUCTIONS (Seat Pad /Head Rest): Machine wash on gentle delicate cycle with cold water. Do not bleach. Do not tumble dry. Hang to dry. Do not iron. Do not dry clean.
  • TOY BAR AND TOYS: Wipe clean with a damp cloth and mild soap. Air dry. Do not immerse in water.
  • FRAME: Wipe the metal frame with soft, clean cloth and mild soap.
• To use the vibration function: To activate the vibration function, slide the vibration switch to the ON position.
• To use the music function: This unit features different melodies. Slide the music switch to LOW or HIGH to activate the music and select the volume.

FCC Statement

This device complies with Part 15 of the FCC rules.

Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Canada ICES-003 Statement

This Class B digital apparatus complies with Industry Canada Standard ICES-003.

Operation is subject to the following two conditions

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Copyright © 2023, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.

References

• Limited Warranty Coverage – Baby Trend
• Baby Trend® | Car Seats, Strollers, High Chairs, Nursery and More!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>