SuperATV IN-DOOR-P-PROR4 Polaris RZR Pro R 4 Aluminum Doors Instruction Manual
- June 17, 2024
- SUPERATV
Table of Contents
SuperATV IN-DOOR-P-PROR4 Polaris RZR Pro R 4 Aluminum Doors
Product Specifications
- Model: IN-DOOR-P-PROR4
- Installation: Driver side shown
- Manufacturer: SuperATV
Product Usage Instructions
Installation Preparations
- Do not discard packaging until product has been successfully installed.
- Read instructions and view illustrations before beginning.
Step-by-Step Installation Guide
Step 1: Remove Front Door from the machine.
Step 2: Remove Rear Door from the machine.
Step 3: Remove Door Hinge Brackets from the machine.
Final Steps
- Transfer Latch components to Rear Door – L (C); tighten.
- Install Rear Door – L (C) to Rear Hinge Brackets with stock hardware; tighten.
Frequently Asked Questions
Q: How should I tighten the hardware during installation?
A: Follow the instructions provided for each component. Hardware should be snug but not overly tight to avoid damaging the parts.
Q: What should I do if I encounter difficulties during installation?
A: Contact SuperATV customer support via email at sales@superatv.com or call 1-855-743-3427 for assistance.
- Do not discard packaging until the product has been successfully installed.
- Driver-side installation is shown.
Description
| Item | Description |
|---|---|
| J | Rear Striker Bracket – R |
| K | Rear Striker Bracket – L |
| L | Front Striker Bracket – R |
| M | Front Striker Bracket – L |
| N | Filler Panel Bracket 2 – R |
| P | Filler Panel Bracket 2 – L |
| Q | Shim x 8 |
| R | Filler Panel Bracket 3 – R |
| Item | Description |
| --- | --- |
| S | Filler Panel Bracket 3 – L |
| T | Upper Hinge Bracket |
| U | Lower Hinge Bracket |
| V | Rear Hinge Bracket 2 – R |
| W | Rear Hinge Bracket 2 – L |
| X | Rear Hinge Bracket 1 – R |
| Y | Rear Hinge Bracket 1 – L |
Installation Instruction
- Install Filler Bracket – L (H) to machine with hardware shown; tighten.
- Install Filler – L (F) to Filler Bracket – L (H) with hardware shown; tighten
- Install Filler Panel Bracket 2 – L (P) to Filler – L (F) with hardware shown; hardware snug but not tight.
- Mark slot location of Filler Panel Bracket 2 – L (P) onto plastic.
- Drill Ø6.5mm hole through center of slot marking.
- Secure Filler Panel Bracket 2 – L (P) to plastic with hardware shown; hardware snug but not tight
- Install Filler Panel Bracket 3- L (S) to Filler – L (F) with hardware shown; hardware snug but not tight.
- Mark the slot location of Filler Panel Bracket 3 – L (S) onto plastic.
- Drill Ø6.5mm hole through center of slot marking.
- Secure Filler Panel Bracket 3 – L (S) to plastic with hardware shown; hardware snug but not tight
- Install Rear Hinge Bracket 1- L (Y) and Shims (Q) with stock hardware; hardware snug but not tight.
- SuperATV recommends starting with (3) Shims (Q).
- Install Lower Hinge Bracket (U) with hardware shown; hardware snug but not tight.
- Install Upper Hinge Bracket (T) and Rear Striker Bracket – L (K) with hardware shown; hardware snug but not tight.
- Install Pin to Rear Striker Bracket – L (K) with hardware shown; tighten.
- Install Front Striker Bracket – L (M) with hardware shown; hardware snug but not tight.
- Install Pin to Front Striker Bracket – L (M) with hardware shown; tighten.
- Transfer Latch components to Rear Door – L (C); tighten
- Install Rear Door – L (C) to Rear Hinge Brackets with stock hardware; tighten.
- Transfer Latch components to Front Door – L (B); tighten
- Loosen hardware shown on Front Door – L (B).
- Retighten after Door has been installed to Hinge Brackets
- Repeat steps for passenger-side installation
Adjusting Doors is easier with someone inside of the machine to tighten hardware and another person outside of the machine to adjust Doors into place
- Close Doors and engage Latches.
- Adjust Doors to machine. Note: making multiple small adjustments will yield best results
Liability Statement
SuperATV’s® products are designed to best fit user’s ATV/UTV under stock conditions. Adding, modifying, or fabricating any factory or aftermarket parts will void any warrantyprovided by SuperATV® and is not recommended. SuperATV’s® products could interfere with other aftermarket accessories. If user has aftermarket products on machine, contact SuperATV® to verify that they will work together. Although SuperATV® has thousands of satisfied customers, user should be aware that installing lift kits, long travel, or suspension kits, tires, etc. will change the ride of machine and may increase maintenance and part wear. Operating any off-road machine while, or after, consuming alcohol and/or drugs increases risk of bodily harm or death. No warranty or representation is made as to this product’s ability to protect user from severe injury or death. SuperATV® urges operators and occupants to wear a helmet and appropriate riding gear at all times. By purchasing and installing SuperATV® products, user agrees that should damages occur, SuperATV® will not be held responsible for loss of time, use, labor fees, replacement parts, or freight charges. SuperATV®, nor any 3rd party, will not be held responsible for any direct, indirect, incidental, special, or consequential damages that result from any product purchased from SuperATV®. The total liability of seller to user for all damages, losses, and causes of action, if any, shall not exceed the total purchase price paid for the product that gave rise to the claim. SuperATV® will warranty only parts provided by SuperATV®. Any damage or problems with OEM housings, bearings, seals, or other manufacturers’ products will not be covered by SuperATV®. SuperATV® parts and products are not warranted if item was not installed properly, misused, or modified. Installing, adding, modifying, or fabricating any factory or aftermarket product to your ATV/UTV may violate certain local, state, and federal laws. Be advised that laws vary depending on town, city, county, state, etc. Use of certain products on public streets, roads, or highways may be in violation law. The Buyer is solely and exclusively legally and personally responsible for any violation of the law by the installation or use of the product. You must abide by all local, state, and federal laws, including but not limited to vehicle safety, traffic laws, and ordinances. It is your responsibility to know the laws and how they apply to you. The Buyer is responsible to fully understanding the capability and limitations of his/her vehicle according to manufacturer specifications, warnings and instructions and agrees to hold SuperATV® harmless from any damage resulting from failure to adhere to such specifications, warnings and/ or instructions. The Buyer is also responsible to obey all applicable federal, state, and local laws and ordinances when operating his/her vehicle while using this product, and the Buyer agrees to hold SuperATV® harmless from any violation thereof.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>