TRAXON Media Tube Go Floor Light Instruction Manual

: June 17, 2024
: traxon

Table of Contents

TRAXON Media Tube Go Floor Light
Product Usage Instructions
Media Tube® Go DW
Product Specifications
Photometrics
Illuminance at a Distance
Dimensions
Accessories
Mounting
System Diagram
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

TRAXON Media Tube Go Floor Light

Product Specifications

Number of Pixel Light Source: 3 pixels, 12 pixels, 24 pixels
Color Range: 2200K – 6500K
Beam Angle: Fixed, non-adjustable
Luminous Flux: 273 lm, 1091 lm, 2181 lm, 89 lm, 356 lm
Efficacy: 72 lm/W, 73 lm/W, 23 lm/W, 24 lm/W
Pixel Pitch: 310mm / 12, 1210mm / 48, 2410mm / 95
Pixel Configuration: 7 WW + CW LEDs per pixel
Housing: Extruded Aluminum housing + Round UV Resistant Silicone cover
Housing Finish Options: Gray (RAL7015, standard), Black (RAL9005, optional), White (RAL9003, optional)
Cover Lens: Round Clear View, Round Diffused View
Mounting: Fixed, non-adjustable
Dimensions (L x W x H, excluding Mounting Bracket): 310 / 1210/ 2410mm x 25mm x 56.5mm
Weight: 0.39kg / 0.86lb, 0.88kg / 1.94lb, 1.62kg / 3.57lb
Regulatory Listing & Safety Approval: CE, CB, ETL, FCC, EMC RoHS, ASTM B117-16, ANSI 3G
Operating Temperature: IP67 Outdoor, Suitable for coastal environments, IK08
Storage Temperature: N/A
Environment Humidity: 85%, non-condensing

Electrical Specifications

Operating Voltage: 24V DC
Power Consumption: 3.8W / 15W / 30W
Lumen Maintenance: L70B50 50,000 hours

System Specifications

Control: DMX512 LED Engine
Power Supply: 24v Outdoor
Addressing Options: Manual Addressing with TX Smart Addresses
Fixture Interconnection: Refer to System Diagram

Product Usage Instructions

Mount the product securely in the desired location.
Connect the power supply to the product following the manufacturer’s guidelines.
Use the appropriate addressing options to configure the lighting effects.
Control the product using the specified DMX512 LED Engine.

FAQ

Q: What is the operating voltage of the product?
A: The operating voltage is 24V DC.
Q: What is the regulatory listing and safety approval of the product?
A: The product is CE, CB, ETL, FCC, EMC RoHS, ASTM B117-16, and ANSI 3G compliant.
Q: What is the lumen maintenance of the product?
A: The lumen maintenance is L70B50 for 50,000 hours.

Media Tube® Go DW

Media Tube® Go is a slim, direct-view luminaire designed for all budgets to integrate into any wall, façade or media lighting application with tight installation requirements. Available in Clear View or Diffused View and 10 pixels per 1.2 meters / 2.5 pixels per foot, the Media Tube® Go ensures smooth effects along your facade, media application or bridge. This product is intended for use in high-quality colored light applications.

Product Specifications

Product Specifications| | | | | |
---|---|---|---|---|---|---
| Clear| | | Diffused| |
| 310mm / 12”| 1210mm / 48”| 2410mm / 95”| 310mm / 12”| 1210mm / 48”| 2410mm / 95”
Number of Pixel| 3 pixels| 12 pixels| 24 pixels| 3 pixels| 12 pixels| 24 pixels
Light Source| 21 2200K –

6500K

| 84 2200K –

6500K

| 168 2200K –

6500K

| 21 2200K –

6500K

| 84 2200K –

6500K

| 168 2200K –

6500K

Color Range| DW (White CCT: 2200-6500K)| | | |
Beam Angle| 120°| | | 110° x 170°| |
Luminous Flux| 273 lm| 1091 lm| 2181 lm| 89 lm| 356 lm| 712 lm
Efficacy| 72 lm/W| 73 lm/W| 73 lm/W| 23 lm/W| 24 lm/W| 24 lm/W
Pixel Pitch| 100mm / 4”| | | | |
Pixel Configuration| 7 WW + CW LEDs per pixel| | | |
Housing| Extruded Aluminum housing + Round UV Resistant Silicone cover| |
Housing Finish Options| Gray (RAL7015, standard), Black (RAL9005, optional), White (RAL9003, optional)| |
Cover Lens| Round Clear View| | | Round Diffused View|
Mounting| Fixed, non-adjustable| | | |
Dimensions

(L x W x H, excluding Mounting Bracket)

| 310 / 1210 / 2410mm x 25mm x 56.5mm

12.2” / 47.6” / 94.9” x 1” x 2.2”

| | |
Weight| 0.39kg / 0.86lb| 0.88kg / 1.94lb| 1.62kg / 3.57lb| 0.39kg / 0.86lb| 0.88kg / 1.94lb| 1.62kg / 3.57lb
Regulatory Listing & Safety Approval| CE,CB, ETL,FCC,EMC RoHS, ASTM B117-16, ANSI 3G| | |
Operating Temperature| -30°C to +55°C / -22°F to +131°F| | |
Storage Temperature| -40°C to +80°C / -40°F to +176°F| | |
Environment| IP67 Outdoor, Suitable for coastal environments, IK08| | |
Humidity| 85%, non-condensing| | |
Electrical Specifications|
---|---
Operating Voltage| 24V DC
Power Consumption| 3.8W / 15W / 30W
Lumen Maintenance| L70B50 50,000 hours
System Specifications|
---|---
Control| DMX512
Power Supply| LED Engine 24v Outdoor
Addressing Options| Manual Addressing with TX Smart Addresser
Fixture Interconnection| Refer to System Diagram

LED CHARACTERISTICS Because LEDs are semiconductor devices, their performances are subject to inherent variability commonly found in the semiconductor industry. To improve consistency in performance across the same product, LED manufacturers “sort” LEDs into bins according to different preset parameters, such as forward driving voltage, illumination, etc. Whereas binning is a sorting function, it is not a correction process. Inherent variability in the manufacturing process results always in different binning distributions according to different production lots. Traxon uses automatically binned LEDs on its products, thereby minimizing output variations within the model range.
As with all electronic devices, LED output degrades over time – a term called lumen depreciation. This also explains why it is nearly impossible to expect the photometric performances of two LED products with different service life spans to be the same. The rate of LED degradation is a complicated function of many factors such as operating efficiency, duration of continuous operation, and more significantly, environmental conditions (ambient temperature for example). If allowed working under optimal operating temperature range and with good ventilation, LED devices enjoy long service lives over conventional light sources. When using/installing LED devices, care should be taken to ensure that the devices will operate within the operating conditions specified in the respective product literature.
This product contains a light source of energy efficiency class G to Regulation (EU) No 2019/2015.
Lumen measurement compiles with LM-79-08 standard.
Lumen maintenance is calculated based on LM-80 compliant measurement.

Source Specifications (Clear)

| 1210mm / 48”
Light Source| 84 2200K + 84 6500K
Optics| 120°

Photometrics

Illuminance at a Distance

For fc divide by 10.7
For feet multiply by 3.28
IES and LDT ﬁles are available for download from the Traxon website.

Source Specifications (Diffused)

| 1210mm / 48”
Light Source| 84 2200K + 84 6500K
Optics| 110° x 170°

Illuminance at a Distance

For fc divide by 10.7
For feet multiply by 3.28
IES and LDT ﬁles are available for download from the Traxon website.

Dimensions

Fixture

Accessories

5-pin interconnection cable (AM463780055/AM463790055/AM463800055)

Starter cable (AM463750055/AM463760055)

RJ45 Starter Cable (AM463820055)

Power injector cable (AM463810055)

End Cap with 120Ω terminator(AM463770055)

Mounting

Cable Connection

Mounting Steps
NOTE : See Installation Guide for additional best practices.

Tube-to-Tube Clearance
To maintain a consistent LED pitch and to allow for thermal expansion, a minimum of 2mm / 0.08″ is required between luminaires. ****

System Diagram

System diagram (Starter Cable)

NOTE : The Address wire only needs to be connected during address conﬁguration, it is not needed during operation. The wiring diagram shows only typical connections. Max. number of ﬁxtures is based on minimal interconnection lengths. Actual number of ﬁxtures is dependent on cable interconnections. The number of ﬁxtures will reduce if longer cable lengths are used. Consult with your regional sales ofﬁce to conﬁrm maximums.

System diagram (Injector Cable) NOTE : The Address wire only needs to be connected during address conﬁguration, it is not needed during operation. Wiring diagram shows only typical connections. Max. number of ﬁxtures is based on minimal interconnection lengths. Actual number of ﬁxtures is dependent on cable interconnections. The number of ﬁxtures will reduce if longer cable lengths are used. Consult with your regional sales ofﬁce to conﬁrm maximums.

Ordering

Fixtures

Model No.	Description	Item Code
TU.MG.5324200	MEDIA TUBE GO DIFFUSED 2410 DW 24PXL	AM463670055
TU.MG.4312200	MEDIA TUBE GO DIFFUSED 1210 DW 12PXL	AM463680055
TU.MG.2303200	MEDIA TUBE GO DIFFUSED 310 DW 3PXL	AM463690055
TU.MG.5324100	MEDIA TUBE GO CLEAR 2410 DW 24PXL	AM463700055
TU.MG.4312100	MEDIA TUBE GO CLEAR 1210 DW 12PXL	AM463710055
TU.MG.2303100	MEDIA TUBE GO CLEAR 310 DW 3PXL	AM463720055

TX Connect

Model No.	Description	Item Code
TU.MG.AC0001	MEDIA TUBE GO STARTER CABLE, 5-WIRE, 1M	AM463750055
TU.MG.AC0002	MEDIA TUBE GO STARTER CABLE, 5-WIRE, 3M	AM463760055
TU.MG.AC0003	MEDIA TUBE GO END CAP, 120Ω TERMINATOR	AM463770055
TU.MG.AC0004	MEDIA TUBE GO INTER CABLE, 5-WIRE, 0.14M	AM463780055
TU.MG.AC0005	MEDIA TUBE GO INTER CABLE, 5-WIRE, 1M	AM463790055
TU.MG.AC0006	MEDIA TUBE GO INTER CABLE, 5-WIRE, 3M	AM463800055
TU.MG.AC0007	MEDIA TUBE GO POWER INJECTOR CABLE	AM463810055
TU.MG.AC0008	MEDIA TUBE GO RJ45 STARTER CABLE	AM463820055

TX Control

Model No.	Description	Item Code
LED ENGINE 100W 24V OUTDOOR	AM175860055
CD.SA.0000100	TX SMART ADDRESSER	AM438260055

www.traxon-ecue.com
©2023 TRAXON TECHNOLOGIES — ALL RIGHTS RESERVED. TRAXON™, TX CONNECT®, ARE TRADEMARKS OF TRAXON TECHNOLOGIES. U.S. PATENTS, E.U. PATENTS, JAPAN PATENTS, OTHER PATENTS PENDING. SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.