Rayrun PB.0 Ledstrip Dimmer Casambi LED Controller User Manual

Single color to RGBW
Full protection
CV output

PB.0 Ledstrip Dimmer Casambi LED Controller

LED Controller
Model No: PB.0

Introduction

The PB.0 LED controller is designed to drive constant voltage LED products in voltage range of DC6-24V. It can be controlled by the CASAMBI app or compatible CASAMBI remote controllers. With advanced wireless network and smartphone connection technology, user can control multiple controllers along with other CASAMBI products by smartphones. With compact housing and lead wire design, the controller can be installed in narrow space. The IP68  waterproof feature is supported on -S version for various applications.

Dimension & Terminal

1. Power supply input
   The controller supply voltage range is from DC 6V to 24V. The red power cable should be connected to power positive and black to negative. The output voltage is at same level as the power voltage, please make sure the power supply voltage is correct and the power wattage is capable for the load wattage. Please be noted the positive power cable is directly connected to the output   cable inside the controller.

2. Work status indicator
   This indicator shows all working status of the controller. It displays different events as following: Steady blue: Normal working. Short white blink: Command received. Red flash: Overload protection.
   Yellow flash: Overheat protection.

3. LED output
   Connect to LED loads. The LED loads need to be constant voltage driving and with common anode connection. Please make sure the LED rated voltage is same as the power supply and each channel’s maximum load current is below the controller’s rated current.
   The PB.0 model can be configured to different application for single color, tunable white, RGB or RGBW. For different application, the 1-4 channel is mapped as following table:

Application| CH1(white cable)| CH2(green cable)| CH3(red cable)| CH4(blue cable)
---|---|---|---|---
Single color| Single color| Single color| Single color| Single color
Tunable white| Cool white| Warm white| No use| No use
RGB| No use| Green| Red| Blue
RGBW| White| Green| Red| Blue
4. Wiring diagram 5. Waterproof (-S version)
The -S version controller has IP-68 waterproof feature with glue injection finish. For overall waterproof performance, the cables must be waterproof treated separately.
Wireless signal degrade : The wireless communication ability could degrade when using at wet environment, please be aware that the wireless control distance will be shortened in such case.

6. Protection function
   The controller has full protection function against wrong wiring, output short circuit, overload and overheat. It will stop working and the indicator will flash red at overload or short circuit situation, the indicator will flash yellow at  overheat situation. The controller will try to recover from protection every 10 seconds after protection occurred, and will automatically recover working when the condition is good.

7. Change model function
   The controller can be configured to single color, tunable white, RGB and RGBW function by CASAMBI app. Please select the ‘Change profile’ function for non- paired controller on app to change model function.

Specification

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>