UNIFORE G106 Burglar Alarm System User Manual

G106 Burglar Alarm System
User Manual

OVERVIEW

Instruction

• Items with , illustrated in the user manual, only be valid for the host which matched with the wifi module.
• An item with the, only used for the customers which have the networking alarm centers and open the service with the alarm center.

Features

• 3–TFT color full touching screen used the simple style human-computer interface
• Main interface status. State magnetic paste, date and time display, the main interface
• Built-in powerful CPU master based on 32-bit Cortex-M3 core.
• Muti-tasking design. great user operation
• Wifi/GSM/3G/GPRS networking alarm system, support mobile app. SMS. invoice alarm center and other multi-channel alarm modules. make the alarm function stable.
• Support SMS arm/Disarm and parameters setting, support invoice arm/Disarm.
• Support main hall. SOS, bedroom, window, balcony, perimeter, smoke. Cooking gas, CO gas, leak water, and another zone setting.
• Support the alarm such as battery problem, low power battery anti-pry alarm, etc.
• Support low power for wireless parts, Tamper alarm
• Door/window not closed notice while armed.
• Support in/out zone, internal zone, peripheral zone, 24 hours zone, doorbell, and another zone
• Support 5 groups alarm phone number set. can set the SMS open/close, dialing open/close respectively.
• External wired alarm connectors: 1 channel external wireless siren. 1 channel alarm linked wireless intelligent socket.
• APP or host can control several so control the home electrical appliances.
• Timed arm/disarm function.
• Support multi-record storing/searching for daily operation
• GSMNViFi network time correcting automatically. ensure the time and date keep correct, support multi-language menu, invoice operation notice, and SMS alarm
• Support 20 seconds message and invoice
• Telephone number function. Support 5 groups number redialing.
• Excellent APP operation feeling and user interface, get the device working status
• Arm/disarm, host alarm to mobile
• Support APP arm/disarm remotely. parameter setting. Parts management and intelligent socket control.
• GPRS networking real-time, get the latest working status anytime, the alarm automatically while offline.
• Reserved remote GPRS TCP/UDP protocol channel, it can be compatible with several alarm center networking protocols.
• Center remote control.

Glossary

• Arm: arrange the security surveillance assignment(Burglar against), make the host get in the warning status, also called defenses setting up, warning or start operation.
• Stay Arm: when users are at home, only need to defend the main entrances and the perimeter, also called a home alarm.
• Disarm: cancel the security surveillance assignment (Burglar against), also called defenses canceling or operation power off.
• Zone triggering: at the arm status, when the detectors detected the human body or the triggers made by the door opened, then caused the warning
• Log off delay: when the host is armed, in order to avoid the alarm made by the user leaving the arm zones, need to set the delay time, also called arm
• Enter the delay: when a user comes back and triggered the detectors, the host will not alarm immediately, give some time for the user to cancel the arm, only alarm if over time, also called alarm delay.
• Alarm: when the host has the alarm assignment, it will cause the strobe alarm locally, then send the SMS alarm to the mobile defaulted, dial the mobile defaulted, push the alarm to the mobile app and send the messenger to the networking alarm center, etc.

Appearance and accessories

Front

Host back parts bottom view

Side

Power on/off & initialization button

successfully
Power off| Push this button for 3 seconds till the screen become black, which means power off successfully
Initialization| Push 5 times, the host will restart means initial successfully (don’t operate when the screen is locked)

SOS button

Push this button when emergency, it will cause the strobe alarm locally, then send the SMS alarm to the mobile defaulted, dial the mobile defaulted, push the alarm to the mobile app and send the messenger to the networking alarm center, etc.

SOS button backlight

Navigating Menus

Main interface function and button description

Menu function icon/button

1. Keyboard lock open: at the main interface, no pushing with 30 seconds or push directly, host locked, user, needs to enter the password for further operation.
2. keyboard backlight closed: at the main interface, no pushing for 30 seconds or pushing directly, host backlight will be closed to save the power.
3. After choosing one language, the operation notice, display, and SMS message will switch to the same language, the host will restart while finished.

Disassembly

Start operation
Insert SIM card ： as the direction of the below picture, insert the standard to MICRO SIM SIM card lot,(need to be cut if big SIM card), when hearing the “ticktack” sounds, means the card is ready。
Power on： Insert the power supply with the USB 5V, Make the host power on.
Start the host： Push the on/off button while the host is closed, succeed while the screen showed “welcome:
Power off： Push the on/off button for about 3 seconds while the working status till the screen becomes black, which means successfully.

System initialization
Press the on/off button 5 times, the host will restart means the system initialization is successful, all the parameters set recovered to the factory setting will delete all the learned remote controllers, sensors, RFIDs, records, languages, and time zone will be recovered to factory settings too. network IP address also be deleted, the GPRS of the host will be dropped line, need to send SMS and reset the IP if want to be online.
Be cautious of this function, only be used while the password forgot, the host works normally, parameter set disorder or the unknown detectors, remote controller or RFID be learned. This operation is no use while the keypad is locked.

Menu operation
This item is based on the Resistance touch screen design, use the press induction to push the screen button for operation.
The function does not describe in this Part, please refer to the details for the menu function button.
Functions described in this part: include the phone number setting, remote controller add/delete, wireless detector add/delete and the external wireless siren matching can be set by mobile app.(only with )

Add alarm phone numbers
5 alarm phone numbers can be set, each number can be set with the independent dial switch and SMS switch.
For example to set the Alarm No. 1:
Press: Main menu phone number management alarm 1 Phone, enter alarm phone No.1 interface setting.
Press enter& edit the alarming number(not more than 18 digits).
Press and choose if open the dial function or not, if choose the ”on”, it will dial this number while the alarm happens.
Press and choose if open the SMS function or not, if choose the “on”it will send a message to this number while the alarm happens.
Press and confirm, the host will note” Setting OK”.

Match code with/delete remote-controllers
Push: Main menuPartsRemote controller, enter the interface for the remote controller setting.
Push or for page down， it will show all the Synchronized remote controller
Sync the new remote controller
Press host will show ”Synchronizing”, and get into the dialogue box for 20 seconds cut down of the remote controller launching.
Press any button on the remote controller and send the signal to the host.
The host shows” Learning OK”, which means the remote controller Sync correctly, it will list all the synchronized remote controller IP addresses.
If the host shows” Device code has been learned”, means the remote controller code has been learned or the other learned detector code has been repeated, please change the remote controller.

Delete
Press the remote controller listed, and delete the chosen remote controller.
Press , and delete all the remote controllers.

Match code with/delete wireless detectors

Press: Main menu Parts Detector, enter into the detector setting interface.
Pressor page down， it will list all the Synced wireless detectors.
Sync the new wireless detectors
Press , host get into the” Set Name/Mode/Number” interface.
Press choose the name of the zone for the none Sync wireless detectors.
Press  choose the type of the zone for the none Sync wireless detectors.
Choose” Stay Arm Active”, after the armor stay arm setting, the detectors in this zones will alarm while being triggered. Front Door、 Window、 Balcony、 Perimeter use this
kind of detector.
Choose“Out Arm Active, after the stay arm setting, the detectors in this zones will not alarm while being triggered. Living Room、 Bedroom and other internal places use this kind of detector.
Choose 24 Hours Active,” it will alarm while be triggered anytime, SOS Panic、 “ ”,  Smoke/Fire、Gas、CO、water Leakage use this kind of detectors.
Choose Close it will not alarm while triggered.
For wireless doorbell, please choose Doorbell “ ”, “ ”, It will note “dingdong” anytime while be triggered.
Press , enter & edit the zoning code of the none Sync wireless detectors, please do not be repeated the code of the other zones.
Press , the host will show” Synchronizing” and will get into the dialogue box for 20
seconds cut down of the wireless detectors.
Trigger the wireless detectors and send signals to the host.
When the host shows” Learning OK”， which means the detectors Sync successfully, it will list all the names of the detectors, type, code, and address code.
If the host shows” Device code has been learned”, means the detectors have been learned or repeated with the code of the other learned remote controller, need to be changed.
Delete
Press the listed detectors, and delete the chosen detectors.
Press , and delete all the detectors.

Match code with/delete RFID tag

Press: Main menu →Parts →RFID card, enter the interface of the RFID setting.
Pressor page down, it will list all the Synced RFID cards.
Sync the new RFID card
Press host will show” Synchronizing”, and will get into the dialogue box for 20 seconds cunt down of the RFID card.
Put the RFID card close to the induction zone.
The host shows” Learning OK”, RFID Sync succeeds, it will list the card number which synced successfully.
If the host shows” Device code has been learned”, it means the RFID card code has been learned.
Delete
Press the listed RFID card number, and delete the relevant RFID card.
Press , and delete all the RFID cards.

Match code with wireless siren

This operation is used to Sync with the wireless strobe siren.
Press: Main menu→ Parts, enter into parts setting interface.
Press the” SET” button of the wireless siren, hear the sound 2 times, and loose off, siren led flashed means synced successfully.
Press the siren syncing button， the host will note” Learn Signal Sent” and send the wireless signal to the siren.
Siren makes the one long sound and one short sound notice, which means the syncing succeed.!
Wireless siren synced with the host, the siren will alarm while the alarm happened on the host.
Wireless alarm linkage
Sync with alarm linkage intelligent socket
Press: Main menu →Parts→ alarm linkage intelligent Alarm Socket, and enter into the alarm linkage intelligent socket setting interface.
Operate the none sync wireless intelligent socket to get into syncing status.(see the intelligent socket user manual).
Press” on” and” Off” in turns, host send the wireless signal to the intelligent socket.
Intelligent socket led flashed means the syncing succeeds, then operate log off the syncing status(see the user manual of the intelligent socket).
Press switch” on” or” Off”, can set the alarm linkage function open or not.!
Press or , check if it can control the intelligent socket used to check if the intelligent socket sync with the host successfully or not.
If the alarm linkage function is set as “on”, while the host is alarmed, the synced socket will open automatically, when the host is disarmed or the alarm sound is finished, the socket will be closed.

Smart home appliance

Full sockets
Interface press: press Socket, and enter into the intelligent socket controlling interface.
Syncing
For the syncing method between the host with the socket, please refer to the” alarm linkage intelligent socket syncing” one host can sync with several sockets.
Press” On” or” Off” host will have the on/off signal to control the wireless socket.

the socket which synced the host successfully can use the host or the mobile app to control on/off, or can do timer control for the socket.
Socket Timer
The host can several groups of timers used to open/close the intelligent socket timed. Each group can set the socket number, time, time on/off, etc.
Press : Main menuPartsSocket Timer, enter into the intelligent socket timer interface.

Add the timer
Press , and enter into the socket timer setting interface.
Press + or – in , set the socket number.
Press + or – in , and adjust the timer time.
Press the week item in ， and set the day of the week.
Press choose timer on or off.
Press , and finish the setting.
Edit
Press the serial number in front of the Timer, can edit the relevant timer, same as the above.
Delete
Press behind the timer list, and delete the relevant timer.
Press , and delete all the Timer.

Message recording and playback

Alarm record
You can record in the host for 20 seconds, when an alarm happened, the host will dial the default numbers and playback this record.
Press: Main menu Record Record & playback.
The host shows the dialogue box ” Busy and waiting please” when changed to” Recording” the record starting cut down.
The user speaks toward the host, the record words need to be simple, such as” This XXX’s home, have been intruded, please give help”.
When the record is finished， hot will show” Playing” and playback automatically.
After the playback is finished， the press will note” Please wait to save”. When the host shows” Operation OK”， the record succeeds.

Time arm/disarm

User can use their timetable, to set the time auto arm and time auto disarm, avoiding repeating daily or forgetting the operation.
Arm Timer
Press: Main menu Timer Arm Timer.
Press +and-, adjust the timer arm time.
Press , choose” On”.
Press , and finish the setting.
Disarm Timer
Press: Main menu Timer Disarm Timer.
Press +and-, adjust the time of the disarm timer.
Press , choose“on“or” Off”.
Press , and finish the setting.

Mobile app

Please refer to the attachment

Remote SMS

Set parameters by SMS
The user only needs to edit the SMS in the below format and send it to the host SIM card number to finish the setting.

One SMS can include one or several addresses and content but need to be separated by, the head and the end must be each address should be 2 digits, otherwise, it may have the unexpected result, each SMS must be less than 160 bytes, we suggest to finish all the contents in one SMS.,

)
38| username password correct| 0000-9999must be 4 digits| 1234
39| System password correct| 0000-9999must be 4 digits| 6666
43| parameter initialization| see note 1|
51| alarm phone 1:` setting| See note 2| closed
52| alarm phone 2nd setting| See note 2| closed
53| alarm phone 3’d setting| See note 2| closed
54| alarm phone 4th setting| See note 2| closed
55| alarm phone 5th setting| See note 2| closed
62| Search the GSM field strength| empty|
90| Set the GPRS server IP address| this setting is only valid while the GPRS is online, see note 3| empty
92| Set the GPRS APN| this setting only be valid while the GPRS is online, see note 4| COMMENT
93| Set domain name of the network time sever| | us.ntp.org.cn
94| Set the time difference with the standard Greenwich time| | +8

Setting comment(all the examples used the default system password:6666)：

1. Parameter initialization: keep the learned remote controller, wireless detectors, and RFID cards, others recovery to the factory setting. Set the SMS content as 666643*.

2. Alarm phone number setting format: xxxxxxxxxxx,A,B
   Such as: xxxxxxxxxxx is the phone number(no more than 18 digits),A: alarm voice dial switch(1-on,0-off),B: SMS alarm switch(1-on,0-off).
   For Example:
   Set 2 alarm phone numbers, the one 13912345678used to receive the voice dialing and SMS, the one 075581234567only used to receive the voice dialing, then the SMS content should be: 66665113912345678,1,152075581234567,1,0.

3. IP address setting format should be：aaa,bbb,ccc,ddd,xxxxx
   Such:as,aaa,bbb,ccc,ddd is the IP address,xxxxx is the port number,use the comma to separate for each address.
   For example:
   Set the GPRS network sever IP address is 116.62.42.223,port number is 2001, then the SMS content setting should be: 666690116,62,42,223,2001*.

4. Set the local GSM operator GPRS access point APN
   For example:
   Local GSM operator GPRS access point APN is the internet. beeline.kz， then the SMS content setting should be：666692internet.beeline.kz*.

Set control panel’s name by SMS
Set one name to the host, used for the prefix for the alarm SMS, so as to distinguish the position for each alarm host.
SMS setting format: 1234@XXestate X building, 1234 is the user password,@is the commend words, “XX estate a building” is the content name(no more than 40 digits).

Set zones’ names by SMS
Set the name of each zona, used to distinguish each zona when the alarm happened.
SMS setting format: 1234@XX bedroom ,1234 is the user password,@ is the commend digit， XX is the zoning code（scope00~99）， “bedroom” is the name want to set（no more than 20 digits）.
Query parameters by SMS
Alarm record
SMS format：666662* ,host echo：

SYSTEM set:

SN:| Host serial number
LANGUAGE:| Host language
ENGINEER PASSWORD:| Engineer password
USER PASSWORD:| User password
WIFI RSSI:| GSM field strength value(0 or 99means the signal is unusual)
GSM CSQ:| WIFI field strength value

Searching system 2
SMS format：666690* ,host echo：

SYSTEM set2:

APN:| Name of the GPRS access point
GPRS IP:| GPRS network IP sever & client number
NTP:| Network time sever domain name
TIME ZONE:| GMT standard time
SERVER:| Sever

Alarm phone number searching setting
SMS format：666651* ,host echo：

PHONE se1:

1:00| 1st alarm phone number, voice switch, SMS switch, general switch
2:00| 2nd alarm phone number, voice switch, SMS switch, general switch
3:00| 3rd alarm phone number, voice switch, SMS switch, general switch
4:00| 4th alarm phone number, voice switch, SMS switch, general switch
5:00| 5th alarm phone number, voice switch, SMS switch, general switch
REDIAL COUNTER:| voice alarm redial counters

Delay searching setting
SMS format：666633* ,host echo：

DELAY set:

ENTRY:| delay entering(unit: second)
EXIT:| delay quit(unit: second)
SIREN:| alarming time(unit: minutes)

Searching switch setting
SMS format：666646* ,host echo：

SWITCH set:

ARM/DISARM BEEP:| arm/disarm Beep switch(1：on，0：off)
ALARM BEEP:| alarm beep switch(1：on，0：off)
ARM/DISARM SMS:| arm/disarm SMS switch(1：on，0：off)

Learned remote controller & detector quantities
SMS format：666626* ,host echo：

DETECTOR learned:

REMOTE:| learned remote controller quantities
DETECTOR:| learned detectors quantities
RFID:| learned RFID card quantities

Phone function

Push in the main interface, and enter into the phone number dialing interface.
Push to look over the dialed phone number.
for the below status, a phone calls will be forbidden: GSM network abnormal, arm/disarm, phone alarm be in progress.

Daily operation

Users can operate the alarm host in any way as below:
Remote controller, keyboards, RFID cards.
Remote SMS
Mobile phone APP
GPRS alarm center
Out arm
By remote control press the key to trigger “Out Arm”.
By keyboard: In Main Interface, press: to trigger Out Arm.
By RFID tag: In disarm mode, put the RFID card close to the sensitive area in the bottom right corner of the alarm host.
By remote SMS: Send SMS message 1234#1 (1234 is the user password), the alarm host will send “System Armed!” SMS to mobile phone to confirm.
By APP: In Main Menu, select the “ ” icon, and the operation for “ Arm” is completed.
The alarm host reminder: A reminding voice “System armed” will be heard, the Main Interface displays “Armed” and “Please exit”, and an exit time progress bar appears.
The user should leave the alarm zone before exit time. If Arm/Disarm SMS switch is on, the preset phone will receive an SMS of “System Armed!”.”
In Out Arm mode, all defense zones are on alert status. If there are any defense zones is been triggered, the alarm host will generate a sound alarm. Meanwhile, the alarm host sends alarm SMS and makes calls to a preset phone number, and pushes alarm information to APP/GPRS alarm center. If the alarm host learned about the alarming leakage smart plug, the plug will switch on when alarming.

Stay arm
By remote control: press the key to trigger “Stay Arm”.
By keyboard: In Main Interface, press to trigger. “Stay Arm”
By remote SMS: Send SMS message 1234#3 (1234 is the user password), the alarm host will send“System Stay Armed!” SMS to mobile phone to confirm.
By APP: In Main Menu, select the “ Stay Arm” icon, and the operation for “Stay Arm” is completed.
The alarm host reminder: A reminding voice “System armed” will be heard, and the Main Interface displays “Stay Armed”. If Arm/Disarm SMS switch is on, the preset phone will receive the SMS “System Stay Armed! “.

In Stay Arm mode, only valid Stay Arm defense zones are on alert status. If any defense zones is been triggered, the alarm host will generate a sound alarm, Meanwhile, the alarm host sends alarm SMS and make calls to a preset phone number, and push alarm information to APP/GPRS alarm center. If the alarm host learned alarming. leakage smart plug, the plug will switch on when alarming.

Disarm
By remote control: press the button to trigger “Disarm”.
By keyboard: press on the main interface .
By RFID tag： in out arm/stay arm mode, put the RFID card close to the sensitive area in the bottom right corner of the alarm host.
By SMS： Send SMS message 1234#2 (1234 is the user password), and the alarm host will send “System Disarmed!” SMS to mobile phone to confirm.
By APP： In Main Menu, select the “ Disarm” icon, and the operation for “Disarm” is completed.
The alarm host reminder: A reminding voice “System Disarmed” will be heard, and the Main Interface displays “Disarmed”. If Arm/Disarm SMS switch is on, the preset phone will receive the SMS “System Disarmed!”.

In Disarm mode, all alarm procedures will be terminated, If Arm/Disarm SMS switch is on, the preset phone will receive the SMS “System Stay Armed! “.If the alarm host learned alarming leakage smart plug, the plug will switch off.

Confirm the operation result by SMS