motionics WiMER1 Wireless Vibration Analyzer User Guide
- June 17, 2024
- motionics
Table of Contents
motionics WiMER1 Wireless Vibration Analyzer User Guide
Important Notes
- Turn off the device after use. It will NOT turn off automatically.
- Do NOT open the device. Opening causes permanent damage and voids the warranty.
Description
-
Pin Connector – connects to Mitutoyo Digimatic data cable
-
Tri-Color LED –
Device is on
Device is in charge
Device is fully charged -
USB Port- connects to USB cable to charge
-
On/Off Button – push on and push off
-
Trigger Connector – 2.5 mm audio port, connects to trigger switch
Product Page
Included in the box
- WiMER1 Base 1X
- Trigger Switch 1X
- USB Charging Cable 1X
- USB Power Adapter 1X
- User Guide 1X
Compatible Software
iOS: Multi Gage Reader (download for FREE from the App Store)
Android: Multi Gage Reader (download for FREE from the Play Store)
Windows: MultiGage Reader (BLE dongle required, download for FREE from
www.motionics.com Go to Resources > Download >
Software)
Multi Gage Reader App iPhone/iPad
Quick Start
- Turn on WiMER1 and connect to Mitutoyo instruments.
- Plug in USB Bluetooth dongle if using Windows PC.
- Run one of the aforementioned apps/software.
- In the main page, tap Scan/+ button to bring up a new pairing page.
- Wait for the software to finish scanning nearby devices, select WIMERXXX to connect.
- Connection may take a few seconds, once paired, instrument reading shows in the software.
Motionics, LLC
© 2023 Motionics, LLC
www.motionics.com
All Rights Reserved.
info@motionics.com
Made in the U.S.A.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>