Shenzhen Xiang Xiang Xy-16 Tws 5.3 Wireless Sports Gaming Headset User Manual

TWS XY-16
Function Instructions

Diagrammatic Sketch

Specifications

• Model: X¥-16
• Bluetooth version: V5.3+EDR
• Earbud battery:30mah
• Charging case battery:400mAh
• Power input:sV
• Product weight: about 46g
• Working time: =4.5 hours(maximum volume)
• Working voltage: 3.3V-4.2V
• Charging time: 80 minutes
• Speaker impedance: F13/320
• Frequency response: 20 20KHZ
• Transmission distancezover 10 meters

Package List

• Bluetooth headset (2PCS)
• Earphone Charging box
• Type-c charging cable
• User’s manual
• Gift package
• Earphone caps (3 pairs)

How to use

1. The boot
   Automatic startup (first use)
   Step 1: Open the top cover of the charging bin.
   Step 2: Take out the earphone. At this time, the earphone will start up automatically and wait to connect the phone.
   Manual boot
   The earphone is not in the charging bin and the earphone is off. Press left and right for 5 seconds to start the earphone.

2. To turn it off
   Automatic earphone shutdown
   Step 1: Remove the earphones from your ears after use.
   Step 2: Put the left and right earphones into the charging bin,close the cover of the charging bin,and it will automatically shut down and charging.
   Manually turn it off
   Step 1: If the earphones are turned on and connected to each other, click either ear The machine shuts down in 4 seconds.
   Step 2: Put the left and right earphones into the charging bin, close the cover of the charging bin, shut down and charge.

3. Bluetooth pairing J charging bin.
   Step 2: Turn on bluetooth.
   Step 3: Find the headset bluetooth name XY-16.
   Step 4: Click Connect, voice reminder after successful connection.
   Note: lf there s pairing device information, the headset will automatically connect to the device within 2.4s. If the headset is not connected to the device,it will automatically shut down after three minutes of standby.

 Operation of earphone

A Answer/Hang up:
Click any headset to answer/end the call.
Hold down either earphone for 1.5 seconds to refuse to answer the call.
B  Pause/play:
Click either earphone to pause or play the music.
C Previous/next:
During the music playing, double click the left earphone to complete the operation of the previous song.
Double-click the headset on the right during the music playing to complete the next song operation.
D  Volume increase and decrease:
Tap the left earphone three times to increase the volume.
Click the right earphone three times to reduce the volume.
E Wake up the voice assistant:
Press and hold for 1.5 seconds to wake SIRI

Precautions for use

1. Headphones should be stored in a dry and ventilated environment to avoid contact with oil, water vapor and steam.In order to avoid affecting product performance.

2.  Avoid cleaning with irritating, organic solvents or materials containing these ingredients.

3. The headset should be used according to the correct specification requirements,and pay attention to the influence of the using environment on the headset.
   To ensure smooth connection, it is recommended that the distance between the mobile phone and the earphone be within 10 meters.

4.  If the earphone fails to connect or communicate properly, do not remove the earphone without permission
   The machine body and its accessories are not guaranteed otherwise.

5.  To charge the earphone, please use the standard car charger or the one specified by our company Chargers required.

6.  To ensure normal use of the earphone, ensure that the power of the earphone is sufficient.

FCC Warning

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCG Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, ‘may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
(1) Reorient or relocate the receiving antenna,
(2) Increase the separation between the equipment and receiver.
(3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ‘Consult the dealer or an experienced radio/TV technician for help.
NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>