UNITEK S1304A 3.5 Inch Docking Station User Manual
- June 17, 2024
- UNITEK
Table of Contents
UNITEK S1304A 3.5 Inch Docking Station
Product Overview
Attached Cable: USB-A to Micro B Data Cable (60cm)
A : LED Indicator for Power
B : Power Switch
C : Micro B Female Port
D : 12V/2A DC Port
E : SATA III HDD/SSD Bay 2.5”/3.5”
Status 1: Light is on while power is on.
Status 2: Light is flashing while sleep mode is on.
Status 3: No light while there is no data transfer.
Status 4: Light is flashing while it’s under reading & writing.
Package Contents
- SyncStation Alu
- 12V/2A Power Adapter
- USB-A to Micro B Data Cable
- User Manual
Safety Notes
- Do not attempt to service or repair the product yourself. Leave any and all service work to qualified experts.
- Do not open the device or continue to operate it if it becomes damaged.
- Do not modify the product in any way. Doing so voids the warranty.
- Do not operate the product outside the power limits given in the specifications.
- Protect the product from dirt, moisture and overheating, and only use it in a dry environment.
- Do not use the product in moist environments and avoid splashes.
- Do not drop the product and do not expose it to any major shocks.
- Keep this product, like all electrical products, out of the reach of children!
Warranty Disclaimer
UNITEK assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failure to observe the operating instructions and/or safety notes.
Technical Data
| Compatibility | USB-A port |
|---|---|
| Systems Supported | Windows XP or later ver. Mac OS X or later ver. Linux |
| USB Specification | USB 5Gbps |
| Hard Drive Version | SATA (Serial ATA) 2.5″/3.5” |
| Input Voltage | 100-240V 50/60 Hz |
| Output Voltage / Output Current/ Output Power | 12V DC / 2A / 24W |
Note
- The hard drive may not be moved after connecting the power supply unit to the socket. This could result in damage to the hard drive and data loss.
- The hard drive adapter may not be unplugged from the PC during data transfer under any circumstance. Data may be lost.
Service and Support
The crossed out trash can sign means that the equipment must not be disposed of with other waste. It should be disposed of in special containers according to the information prepared by the local government.
Further support information can be found here: www.unitek-
products.com
Email: [email protected]