Fosi Audio MC101 Bluetooth Stereo Amplifier User Manual

MC101 User Manual

Introduction

Thank you for purchasing the Fosi Audio MCl 01 VU meter power amplifier!
The Fosi Audio MCl 01 s a Bluetooth power amplifier with a VU meter. It is equipped with a volume control, bass & treble knobs with central detents for tone-defeating, and an exquisite VU meter. The MCl 01 offers two signal input options: RCA and Bluetooth, which can be effortlessly shifted between using a toggle switch. It can deliver a maximum output power of 200 watts nto two channels, fulfilling your everyday audio requirements. In addition, the MCl 01 features a PRE-OUT port for convenient audio system expansion. Finally, besides providing an outstanding audio experience, the MCl 01 takes your audio experience to new heights with its captivating lluminated VU meter and a dancing pointer that synchronizes with the music, mmersing you in an unparalleled audiovisual journey of dual enjoyment.

1. Bass Knob (Gain ±12dB)
2. Treble Knob (Gain ±6dB)
3. VU Meter
4. Power/Input Selection Toggle Switch
5. Indicator Light (In RCA mode, the red ight s steady; in Bluetooth mode, t blinks during pairing and stays steady when the connection built successfully)
6. Volume Knob (Long press to manually clear Bluetooth connection)
7. RCA Input
8. Pre-Out
9. Speaker Output
10. Bluetooth Antenna
11. DC 12-24V Power nput

Specifications

Package Contents

Fosi Audio MC101 Bluetooth Power Amplifier x 1
Bluetooth Antenna x 1
24V/4.5A Power Adapter x 1
User Manual x 1

Operation Guide

1. Turn the toggle switch to OFF, install the Bluetooth antenna, turn the volume to minimum, and adjust the bass & treble knobs to the middle point;
2. Plug n 24V/4.5A power supply;
3. Use the speaker cables to connect the passive speakers to the binding posts of MC101;
4. Select the input mode: for wired input mode, please connect the audio source to the RCA input terminals via RCA cables; for Bluetooth mode, tap to connect Fosi Audio MC101 on your audio source device;
5. Adjust the volume knob for the appropriate volume to start enjoying the

Precautions

1. Do not plug or unplug the cables while the device s on to prevent abnormal sound or potential damage to the product;
2. Before switching on the amp, please adjust the volume to a low evel to avoid hearing damage caused by excessive volume.

Frequently Asked Questions

1. Why is the sound coming out of the MC101 so low until the volume is adjusted to a higher level?

The MC101 's volume control adopts a Taper A potentiometer that ncreases volume ogarithmically. The increase in sound is slight in the early stage but increases significantly in the latter stage. Human ears perceive sound logarithmically rather than inearly, so this design can better match the characteristics of human hearing to provide a more natural and intuitive volume control.

2. Why is there no sound output when the product is connected and music is played upon startup?

A. The amplifier is not powered on, please check whether the mode indicator is on; B. The volume of the amplifier is too small, please turn the volume knob clockwise and adjust it to the right level; C. The audio cable is connected ncorrectly, please reconnect it according to the steps n the nstruction manual; D. The audio source is not playing or muted, please check the audio source equipment.

3. Why is the power indicator light very dim or flashing constantly after powering on?

It is normal for the blue ight to blink in Bluetooth mode when it is waiting to be connected, and the blue light will stay steady when successfully connected; The blinking power indicator in RCA mode may be due to insufficient power supply voltage, please make sure you are using the supplied 24V/4.5A power supply.

4. What is the purpose of the pre-out interface?

The MC101 's pre-out interface can be used to expand your audio system. You can connect a powered subwoofer, active speakers, or another amplifier to the MC101 via the pre-out port. Please note that the volume of the pre-out interface is controlled by the volume knob and the toggle switch, but is not affected by the bass and treble controls.

5. How do I clear the existing Bluetooth connection?

The MC101 supports an auto-reconnect feature, which automatically re- establishes the Bluetooth connection if it's interrupted due to reasons ike the device being moved too far, powered off, or experiencing a power outage. If you need to manually disconnect from a paired Bluetooth device, please long press the volume knob for about 5 seconds until the mode indicator light starts to flash.

6. What is the purpose of the VU meter?

The VU meter is an nstrument used to measure the level of audio signals, assisting in monitoring the strength and dynamic range of audio signals. It helps prevent overload and avoids distortion.

If you have any further questions, please contact our support team at support@fosiaudio.com

Warranty and Maintenance

Fosi Audio pledges to give a 24-month limited warranty and support from the date of purchase. If you encounter any problem when using our product, please contact our support team at support@fosiaudio.com.
About Us
Fosi Audio designs and builds innovative audio products with all your music in mind. Great sound, simple but elegant designs, high-quality components, and truly useful features are what Fosi Audio pursues. We sincerely hope you can get as much enjoyment from our products as we’ve had to create them!
Our Website: www.fosiaudio.com
Amazon Store: www.amazon.com/fosiaudio
Facebook Page: Fosi Audio
Youtube Channel: Fosi Audio
Whatsapp: +86 13716612254
After-Sales Service and Technical Support Email: support@fosiaudio.com

Get online supporthttps://www.fosiaudio.com/pages/user- instruction-mc101/

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>