ATEN CL5708 8 16 Port PS 2-USB VGA Single Rail LCD KVM Switch User Guide
- June 17, 2024
- Aten
Table of Contents
CL5708 / CL5716
8/16-Port PS/2-USB VGA Single Rail
LCD KVM Switch
Quick Start Guide
Hardware Overview
Applicable Models
- CL5708N / CL5708M / CL5708FM / CL5708MW
- CL5716N / CL5716M / CL5716FM / CL5716MW
Front View
1 handle
2 slide release
3 LCD display
4 LCD controls
5 port LEDs
6 keyboard
7 touchpad
8 station / port switches
9 external mouse port| 10 power LED
11 rack mount brackets
12 lock LEDs
13 reset switch
14 firmware upgrade section
15 USB port (inapplicable to CL5708MW / CL5716MW)
16 LED illumination light
---|---
Rear View
1 power socket
2 power switch
3 daisy chain port| 4 KVM port section
5 grounding terminal
6 external console section
---|---
Installation
Standard Rack Mount
- While one person positions the switch in the rack and holds it in place, the second person loosely screws the front brackets to the rack.
- While the first person still holds the switch in place, the second person slides the L brackets into the switch’s side mounting brackets, from the rear until the bracket flanges contact the rack, then screws the L brackets to the rack.
- After the L brackets have been secured, tighten the front bracket screws.
Single Stage Installation
- Use a KVM cable set to connect any available KVM Port to the computer’s keyboard, video and mouse ports.
- Plug the power cord into the KVM switch power socket and into an AC power source.
Operation
The CL5708 / CL5716
provides three port selection methods to access the computers on the
installation: keyboard, an OSD (on-screen display) menu system, and hotkeys.
Keyboard Selection Buttons
Use the UP and DOWN Port ID / Station ID selection buttons located on the
keyboard module to switch KVM focus to any port on the installation.
Continually pressing any button cycles through the list of available
ports/stations.
OSD
The OSD incorporates a two-level (administrator / user) password system.
Before the OSD main screen displays, a login screen appears requiring a
password. If this is the first time that the OSD is used, or if the password
function has not been set, simply press [Enter] [Enter]. The OSD main screen
displays in administrator mode.
Note: Optionally change the OSD hotkey to the [Ctrl] key, in which case
you would press [Ctrl] twice. With this method, you must press the same [Ctrl]
key.
To bring the KVM focus to a port, double-click it, or move the Highlight Bar
to it then press [Enter].
Hotkeys
All hotkey operations begin by invoking Hotkey mode. There are two possible
keystroke sequences used to invoke Hotkey mode, though only one can be
operational at any given time.
-
Number Lock and Minus Keys (Default Hotkey)
1. Hold down the Num Lock key
2. Press and release the minus key
3. Release the Num Lock key: [Num Lock] + [-] -
Control and F12 Keys
1. Hold down the Ctrl key
2. Press and release the F12 key
3. Release the Ctrl key: [Ctrl] + [F12]
Package Contents
1 CL5708 / CL5716 8/16-Port PS/2-USB
VGA Single Rail LCD KVM Switch with Standard Rack Mount Kit
2 custom KVM cable sets
1 5-in-1 USB / PS/2 console cable
1 firmware upgrade cable
1 power cord
1 user instructions
Support and Documentation Notice
All information, documentation, firmware, software utilities, and
specifications contained in this package are subject to change without prior
notification by the manufacturer.
To reduce the environmental impact of our products, ATEN documentation and
software can be found online at http://www.aten.com/download/
Technical Support
www.aten.com/support
Scan for more information
|
---|---
https://www.aten.com/global/en/products/modelno/cl5708/|
https://www.aten.com/global/en/products/modelno/cl5716/
|
http://www.aten.com/ext_libraries/manuals.php?n=cl5708|
© Copyright 2023 ATEN® International Co. Ltd.
ATEN and the ATEN logo are registered trademarks of ATEN International Co.,
Ltd.
All rights reserved. All other trademarks are the property of their respective
owners.
Part No. PAPE-1223-753G
Released: 06/2023www.aten.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>