VEVOR W-1.0X915 Box and Pan Brake User Manual
- June 17, 2024
- VEVOR
Table of Contents
HAND BENDING
OPERATION MANUAL
MODEL: W-1.0X915/W-1.0X1220
W-1.0X915 Box and Pan Brake
Technical Support and E-Warranty Certificate www.vevor.com/support
We continue to be committed to provide you tools with competitive price.
“Save Half”, “Half Price” or any other similar expressions used by us only
represents an estimate of savings you might benefit from buying certain tools
with us compared to the major top brands and doses not necessarily mean to
cover all categories of tools offered by us. You are kindly reminded to verify
carefully when you are placing an order with us if you are actually saving
half in comparison with the top major brands.
NEED HELP? CONTACT US!
Have product questions? Need technical support? Please feel free to contact
us:
Technical Support and E-Warranty Certificate
www.vevor.com/support
This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won’t inform you again if there are any technology or software updates on our product.
Specifications
| Model. | W-1.0X915 | W-1.0X1220 |
|---|---|---|
| Maximum Bending Width | 36 inches | 48 inches |
| Maximum Bending Angle | 0-135 ° | |
| Bending Thickness | 1mm (20 gauge) |
Standard accessories:
Jointed arm ……………………………………2
Save This Manual
You will need the manual for the safety warnings and precautions, assembly
instructions, operating and maintenance procedures, parts list and diagram.
Keep your invoice with this manual. Write the invoice number on the inside of
the front cover. Keep the manual and invoice in a safe and dry place for
future reference.
Safety Warnings and Precautions
WARNING: When using tool, basic safety precautions should always be followed to reduce the risk of personal injury and damage to equipment.
Read all instructions before using this tool!
-
Keep work area clean. Cluttered areas invite injuries.
-
Observe work area conditions. Do not use machines or power tools in damp or wet locations. Don’t expose to rain. Keep work area well lighted.
Do not use electrically powered tools in the presence of flammable gases or liquids. -
Keep children away. Children must never be allowed in the work area.
Do not let them handle machines, tools, or extension cords. -
Store idle equipment.. When not in use, tools must be stored in a dry location to inhibit rust. Always lock up tools and keep out of reach of children.
-
Do not force tool. It will do the job better and more safety at the rate for which it was intended. Do not use inappropriate attachments in an attempt to exceed the tool capacity.
-
Use the right tool for the job. Do not attempt to force a small tool or attachment to do the work of a large industrial tool. Do not use a tool for a purpose for which it was not intended.
-
Dress properly. Do not wear loose clothing or jewelry as they can be caught in moving parts. Protective, electrically non-conductive clothes and non-skid footwear are recommended when working. Wear restrictive hair covering to contain long hair.
-
Use eye and ear protection. Always wear ISO approved impact safety goggles. Wear a full-face shield if you are producing metal filings or wood chips. Wear an ISO approved dust mask or respirator when working around metal, and chemical dusts and mists.
-
Do not overreach. Keep proper footing and balance at all times. Do not reach over or across running machine.
-
Maintain tools with care. Keep tools sharp and clean for better and safer performance. Follow instructions for lubricating and changing accessories. The handles must be kept clean, dry, and free from oil and grease at all times.
-
Stay alert. Watch what you are doing; use common sense. Do not operate any tool when you are tired.
-
Check for damaged parts. Before using any tool, any part that appears damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment and binding of moving parts; any broken parts or mounting fixtures; and any other condition that may affect proper operation. Any part that is damaged should be properly repaired or replaced by a qualified technician.
-
Guard against electric shock. Prevent body contact with grounded surfaces such as pipes, radiators, ranges, and refrigerator enclosures.
-
Replacement parts and accessories. When servicing, use only identical replacement parts. Use of any other parts will void the warranty.
Only use accessories intended for use with this tool. Approved accessories are available from the distributor. -
Do not operate tool if under the influence of alcohol or drugs.
Read warning labels on prescriptions to determine if your judgment of reflexes is impaired while taking drugs. If there is any doubt, do not operate the tool.
Note: The warning and instructions contained in this instruction manual cannot cover all possible conditions and situations that may occur when using this product. It must be understood that common sense and caution are factors, which cannot be built into this product. These factors must be supplied by the person who operating this piece of equipment.
Assembly and Operating Instructions
The 36”（48”） Mighty Mini Bender requires some minor assembly as described below. Please refer to the parts diagram and the parts list shown below when reading this instruction.
-
The Stand (#1) should be secured to a work bench using the mounting holes and 4 bolts (3/8” diameter).
-
Each Handle Ball (#7) should be attached to the Handle Lever (#6) and the Handle Levers should be placed into the Pins (#5).
-
To use the Mighty Mini Bender, lower the Handle Lever until the Moving Plate is parallel to the work bench. Position the material to be bent on the Supporting Plate (#2) and the moving Plate and properly align with the edge to be bent up against the back edge of the Supporting Plate.
-
Place and secure the Pressing Plate (#3) on top of the Supporting Plate with the back edge of Pressing Plate aligned with back edge of Supporting Plate.
-
Raise the two Handle Levers to bend the material to the desired angle.
Warning: When using the Mighty Mini Bender keep fingers clear of the Supporting Plate and Moving Plate to avoid personal injury. -
When the Mighty Mini Bender is not in use, it should be covered and stored in a dry location.
Parts List
| Part # | Description | Qty |
|---|---|---|
| 1 | Stand | 1 |
| 2 | Supporting Plate | 1 |
| 3 | Pressing Plate | 1 |
| 4 | Moving Plate | 1 |
| 5 | Pin | 2 |
| 6 | Handle Lever | 2 |
| 7 | Handle Ball | 2 |
Made In China
Technical Support and E-Warranty Certificate
www.vevor.com/support