PHILIPS JS7310 Multi Function Car Jump Starter User Manual
- June 1, 2024
- Philips
Table of Contents
PHILIPS JS7310 Multi Function Car Jump Starter
JS7310 model name and serial number are printed on the product label
Warranty and service
Lumileds is the warrantor of this product The limited warranty applies, provided that:
- The product is within the warranty period, which is 1 year from the date of purchase;
- The product is used properly and in line with its intended purpose;
- The product is handled by its operating instructions;
- The original purchase receipt is presented with the product.
The Lumileds warranty excludes or does not apply, if:
- The proof-of-purchase document has been altered in any way, or is made illegible;
- The model number, serial number or production date code on the product has been altered, removed, or made illegible;
- The product has been dismantled, repaired, or modified by any. unauthorized service provider or person;
- The product does not function properly because it was not originally designed, manufactured or approved for use in the country where you used the product;
- The defect is caused by abuse of the product, or by environmental conditions Uiat does not conform with the guidance contained within this usermanual (including but not limited to lightning, abnormal voltage, fire, natural disaster, transportation, or water), or by normal wear and tear.
Important : please read Please only use the items and accessories
supplied in this pack3ge to install the device. Please avoid high temperatures
and direct sunlight exposure when operating this product outdoors.
For more information and assistance, or any problem with the product, please
visit the Philips website at
www.philips.com/automotive, or contact
the retail outlet where you purchased the product.
Alternatively, you can also call the customer service hotline:
- For China: 400 690 8826
- For Japan: 0570-080-123
- For Korea: +82-31-620-1600
- For Taiwan: 0800 700 168
Manufacturer: Lumileds (Shanghai) Management Co., Ltd.No. 19-20, Lane 299, Wenshui Road, Jian’An District, Shanghai Postal code: 200072
Product Overview
- LED screen
- USB-C In/out port (PDlOOW Max)
- US Bl out port (QC3.0, 5V/ 9V/12V)
- USB2outport(SV/2.4A)
- DC out port (lSV/lOA, Max 150W)
- lSV/lOA
- Power button
- BOOST button
- 12VJumpstartoutput
- LED flashlight
- Wrist lanyard
Included accessories
Display Screen Instructions
- READY solid: indicates the device is ready for jumpstarting the vehicle. READY blinks: indicates the car battery voltage is too low and needs to activate the BOOST mode.
- Battery power percentage: Battery storage level.
- Small current mode: with this mode, it can charge devices that require a small current, such as headphones and smart watches, to turn on this mode, please press hold the C!> button and BOOST button simultaneously for 2 seconds.
- Reverse connection indicator.
- Low-temperature warning: indicates that the temperature of the product battery is below 0°C/32° F.
- Vehicle battery diagnosis: When the vehicle battery’s voltage is detected to be low or abnormal, a warning icon will flash on the screen, notifying you to charge or double-check that battery.
- Input/output wattage.
- Vehicle battery voltage
Operational Guideline
Steps to Jump Starter Vehicles(12Vonly)
Note:
- Suggest the battery power is higher than 75% before jump-starting the vehicle.
- Ensure the vehicle is in PARK gear and all accessories (headlights, audio, etc) are turned off.
- Ensure the battery terminals are free of corrosion.
- DO NOT press the BOOST button before connecting the vehicle battery correctly.
- Ensure two clamps are connected to the proper terminals
Steps
- Connect the plug of the clamp into the device(make sure it is fully connected).
- Connect the red clamp to the vehicle’s positive(+) battery terminal first, and then connect the black clamp to the negative(-) battery terminal.
- If the READY icon becomes on, start the vehicles directly.
- When the vehicle starts, leave the engine running and remove the jump starter clamps from the vehicle battery in the order of negative(-) first and then positive(+). If other messages appear on the screen, please follow the corresponding steps in the following table
**Error Message on Screen
**
Error Message/ Cause/ Solution
How to charge phones, tablets and 12V electronic devices
- Select a suitable connection cable for the device.
- Connect the end of the cable to the device’s output port.
- Press the power button to start charging the mobile phones, tablets or other 12Velectronic devices. ’12V extension cable is not included
How to charge small current devices, such as headphones and smartwatches
- Select a suitable connection cable for the device.
- Connect the end of the cable to the device’s output port
- Press hold the POWER button and BOOST button simultaneously for 2 seconds to start charging
How to use the LED flashlight
- Press and hold the Power button for 2 seconds to turn on the LED light
- The LED light has 4 modes, appearing in the following order: normal, SOS.strobe and OFF. Toggle between these modes by pressing the “Power” button lightly
The light will automatically switch off after 12 hours of inactivity
Technical Specification
FAQ
-
Q1: How to turn off the jump starter?
Al: This device is equipped with an intelligent power saving system, it will automatically shut down when there is no load. Or you can press and hold the power button for 10 seconds to force it to shut down. -
How many times can this JS7310 start a car after a full charge?
A2: Approximately 40 times to start the gasoline 2.0L vehicle -
Q3:What should I do if this unit can’t start a vehicle?
A3: Recharge this unit fully, then press the “BOOST” button after connecting jump cables with your car battery. After READY(solid) appears on the screen, startyour car engine within 30 seconds.
Warning
- Please be cautious when using it.
- Please read the instructions carefully before use.
- The product can only be used for starting 12V vehicles. It is prohibited to use it on equipment such as aircraft and ships.
- Please do not use it if the clamp or the unit has any damage.
- Do not use it as a car battery.
- Do not use it as a car battery charger.
- Please remove the unit from your car battery in time after cranking your car successfully.
- Please use the equipped jumper cables and other accessories that come with it only.
- Please make sure that the blue end of the jumper cable is fully inserted into the jumper cable interface. Otherwise, the blue end may melt.
- Before use, make sure all battery connectors are clean and the clamps are connected right. It will weaken the starting performance if the battery poles are dirty or corrosive.
- Please do not use it more than three times in a row. Or it can be overheated and damaged. It’s better to let it cool down for 2 minutes after using it three times in a row.
- Please remove the product from the car battery within 30 days after use. or it may cause damage.
- Do not connect the positive and negative clamps when the power is on.
- Please make sure that the electricity is more than 25% when you us it to start your car.
- Please keep this product away from children.
- Do not play it as a toy.
- Do not wet the product.
- Do not immerse the product in water.
- Do not operate the product in an explosive atmosphere like the presence of flammable liquids, gases, or dust.
- Do not remodel or disassemble the product. Professional technicians are allowed to repair.
- Do not expose the product to extreme heat or fire.
- To avoid the risk of short-circuiting caused by metals falling into the hole, please remove your jewellery such as rings, bracelets, and necklaces before using the product.
- Do not drop the product. If the product is impacted or damaged, it must be tested by a qualified battery technician.
- Do not place the product in an environment where the temperature exceeds 70°C/158°F.
- Please charge at room temperature not exceeding 45′ C/113’F, Only charge when the ambient temperature is between O’C and SS”F.
- Please use the charger delivered with the power pack to charge it only.
- Do not use the device to start the car when It Is being charged.
- If the host leaks, please immediately recycle it with the proper equipment.
- Under extreme conditions, battery leakage may occur. If the liquid comes out of the product, It cannot be handled directly by hand. In the case of skin contact, wash Immediately with soap and water. If the liquid comes in contact with your eyes, rinse your eyes with cold tap water for at least 10 minutes and seek medical attention immediately.
- Lithium-Ion battery-based products should be disposed of under local regulations at the end of their life.
Lumileds Holding B.V. is the warrantor of this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. 2024 © Lumileds Holding B.V. All rights reserved
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>