STREAMLIGHT 76801 Stinger Switch Blade Instruction Manual
- June 14, 2024
- StreamLight
Table of Contents
STREAMLIGHT 76801 Stinger Switch Blade
Product Information
The Stinger Switchblade is a portable flashlight designed to provide high- intensity and robust lighting. It requires proper care and maintenance for reliable operation. The product manual contains important instructions for safe operation and should be kept for reference.
Product Usage Instructions
- Before using the Stinger Switchblade for the first time, it needs to be charged.
- Safety precautions:
- Keep this instruction manual for reference.
- Read all instructions and warnings before using a battery charger.
- Do not use an extension cord.
- Never use a damaged charger. Replace damaged cables or plugs immediately.
- Do not place metal objects on the charging contacts of the charger holder.
- Do not perform any cleaning or maintenance work on the charger unless instructed.
- Refer to the marking on your flashlight to determine the exact battery type needed.
Charging Instructions:
- Charge the flashlight overnight before first use. It can be stored in the charger or left plugged into the micro-USB port when not in use.
- The charging time depends on the current strength at the USB port.
- When using the USB charging port on the flashlight or the chargers with part numbers 22049, 22058, 22059, 22071, or 22072, the charging time is 8 hours.
- To charge the flashlight in a Stinger charger:
- First, turn off the flashlight.
- Insert the flashlight into the charger, aligning the triangular plate on the head with the corresponding groove in the charger.
- Slide the flashlight handle between the arms of the charger, with the plate facing towards the charger.
- Press down until it clicks into place.
- The red LED on the charger indicates that the battery is being charged.
Note: The given text contains multiple languages.
The provided response is based on the English part of the text.
Thank you for selecting the Stinger Switchblade, a truly remarkable portable
light. As with any professional tool, reasonable care and maintenance of this
product will provide years of dependable service.
Please read this manual before using your Stinger Switchblade.
It includes important safety and operating instructions and should be saved.
The Stinger Switchblade must be charged before first use.
SAFETY
-
SAVE THESE INSTRUCTIONS. This guide contains important safety and operating instructions for your Switchblade and charger (if applicable).
-
Before using a battery charger, read all instructions and cautionary markings on the charger.
-
Don’t abuse the cord. Never carry a charger by the cord or use the cord to disconnect the charger from a receptacle.
-
Plug AC chargers directly into an electrical outlet. Do not use an extension cord.
-
Do not operate any damaged charger. Replace damaged cords or plugs immediately.
-
Do not put any metal objects on to the charging terminals located in the charger holder.
-
Remove the Switchbae tron she charger hother detore attaing any ruine cleaning
-
See the product markings for the specific battery required for your light. Do not open battery, dispose of in fire, or short circuit – may ignite, explode, leak or get hot causing
- Do not short the battery pack as it may create a fire hazard. For transport or storage, place protective cap or tape over recessed battery contacts.
-
A small leakage of liquid from the battery cells can occur under extreme usage or temperature conditions. This does not necessarily indicate a failure. However, if the outer case seal is broken and the chemical leakage gets on your skin:
-
Any liquid chemical must be flushed off the skin with a generous amount of water.
Brush any dry or powdered chemicals thoroughly, before flushing the area with profuse amounts of water. -
If battery liquid gets into the eyes, flush them with clear water for a minimum of thirty 33% soluten or stasim hyat medical attention. Medical note: The liquid is a 25-
-
-
Do not charge the Switchblade in potentially hazardous locations.
-
Do not attempt to repair or replace any components in potentially hazardous locations.
USING THE LIGHT
- The pushbutton switch is located on the body of the light under the rotatable light bar.
- Depress the button momentarily to turn the light on. The Cool white LEDs will come on and brighten in a few seconds. Press the button again and the cool white LEDs turn off and the turn of and the Ch LED turns on to leak detection. The tourt press with turm the light off
- Note: The LEDs turn on in a low light condition and ramp up to full brightness to help
- Phe ight has a i minute iner on ne 10 to ensure the irth tuats oft, i the user does not cycle all the way to off and inadvertently leaves the UV LED on. Therefore if using the UV LED for more than 40 minutes, the light will turn off and will need to be turned back on,
- The badl of the witchbiade can tate 180° on the body. Soft detents will hold the blade in your desired position, and the light will stand on its tail on a flat surface with the light bar in any position.
- The foot includes two handy hooks and there is also a retractable hook (Lift and slide out the integrated hook.) to allow for many differ hanging options.
- The foot also includes magnets in the base that will hold the light on any convenient ferrous metal surface to provide task-specific illumination.
CHARGING INFORMATION
Fully charge your flashlight before first use. The flashlight may be stored in
the charger continuously when not in use or left plugged into the micro USB
port.
Tower source, then to back ine user micro su cover on the iphi, pig the micro
Us charge noicator is tated just be o the ruber cover Dee en he charge cradle
ontacts.
The indicator will glow red for charging. It will blink when the cell is fully
charged.
Charge times will vary depending on the current available from the USB port.
Charge time using the USB charge port on the light, using SL #22049, 22058,
22059, 22071, or 22072 charger, recharges in 8 hours.
To charge the flashlight in a Stinger Charger. First turn it off and insert it
into the charger.
The triangular plate on the head fits into a mating recess in the charger.
With the plate toward the charger, slip the barrel of the light between the
charger arms and pull downward until it locks into place. The red LED on the
charger housing must light to ensure that the battery is being charged.
Keep the flashlight and charger contacts clean at all times. Poor contacts can
cause charger malfunction. An abrasive pencil eraser works well to clean the
contacts.
STINGER SMART CHARGER
Pect-Erg it and arges alex sing singer chargers, cia re times will lary.
Before mounting a Streamlight charger in a vehicle, please read the following
sections.
CHARGER MOUNTING
The charger should never be mounted against any heat sensitive surface. Before
drilling any holes, make sure there is room to insert and remove the
flashlight. Two (2) self-tapping #8 x2″ screws are included to mount the
charger. The correct size hole for these screws in sheet metal is 1/8.”
VEHICULAR CHARGING
A 12V DC power cord (#22051) is equipped with a cigarette plug and is
available for mounting a Streamlight charger in a vehicle. The plug can be
removed and the wires can be attached directly to a power source for a more
permanent installation. (A two amp fuse must be used on the positive lead.)
IMPORTANT: Before making electrical connections in a vehicle, keep in
mind that a shorted auto battery can easily start a fire. Make all connections
with insulated lugs or other connectors intended for such use. Be sure that
vour installation is fused.
The striped power lead is positive and the unmarked lead is negative. When
connecting the charger to a fuse block the striped, positive power lead goes
to the connector that is dead when the vehicle’s fuse is removed. The charger
body is electrically isolated from the charge circuit and allows positive
ground installations. The charger is diode protected and if connected in
reverse polarity simply won’t operate until connected properly.
Streamlight recommends connecting chargers to an unswitched source of power to
ensure the flashlight is always fully charged. If the vehicle will not be
driven for several days, the flashlight should be removed from the charger to
avoid vehicle battery drain.
BATTERY REPLACEMENT
To replace the Streamlight Li lon cell pack. Slide the stainless steel hook from its nest until it is fully extended. Rotate the hook so it is hanging over the side of the light. Remove the four screws on the base cover using a Philips screw driver. Slide the foot back, then rotate it to the side. The battery stick will now slide out of the lights barrel. Only replace with an approved Streamlight 76805 cell pack. Slide the new battery into the barrel with the positive end entering the barrel first. Replace the bottom cover.
PRODUCT REGISTRATION: To register your product, go to
www.streamlight.com
(Online Product Registration). Retain your receipt or any proof of purchase.
PRODUCT USE: Streamlight flashlights are intended for use as high intensity, heavy duty, portable light sources. Use of Streamlight flashlights for any purpose other than as light sources is specifically discouraged by the manufacturer.
WARNING: Be sure to use only genuine Streamlight® replacement parts.
Important: Always use Streamlight approved replacement parts, substitution may invalidate underwriter’s approval.
STREAMLIGHT’S LIMITED LIFETIME WARRANTY
Streamlight warrants this product to be free of defects for a lifetime of use
except for batteries and bulbs, abuse and normal wear. We will repair, replace
or refund the purchase price of this product should we determine it to be
defective. This limited lifetime warranty also excludes rechargeable
batteries, chargers, switches and electronics which have a 2 year warranty
with proof of purchase. THIS IS THE ONLY WARRANTY, EXPRESSED OR IMPLIED,
INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES ARE EXPRESSLY DISCLAIMED EXCEPT
WHERE SUCH LIMITATION IS PROHIBITED BY LAW.
You may have other specific legal rights which vary by jurisdiction.
Go to www.streamlight.com/support for a
complete copy of the warranty, and information on product registration and the
location of authorized service centers. Retain your receipt for proof of
purchase.
SERVICE
Go to www.streamlight.com for the location of an
authorized Streamlight repair center near you.
Customer Service
STREAMLIGHT, INC. 30 Eagleville Road, Suite 100 Eagleville, PA U.S.A.
19403-3996
Phone: 800-523-7488 Toll-Free • Fax:
800-220-7007 •
www.streamlight.com
Caution: LED Radiation (RG-2) –
Do not stare into beam.
May be harmful to eyes.
References
- achat.re - This website is for sale! - achat Resources and Information.
- Welcome to nginx!
- Streamlight Tactical & Safety Rated Flashlights & Headlamps
- Support