MAFELL 202069 Compound Miter Rail User Guide
- June 13, 2024
- mafell
Table of Contents
**MAFELL 202069 Compound Miter Rail User Guide
**
Product information
In respect of accessory “universal guide” with item No. 202069
Manufacturer´s data
MAFELL AG, Biffed order Strake 4, D-78727 Bergdorf / Neckar,
Use according to intended purpose / operation
The universal guide 1 (shift rail) can be used with all MAFELL machines that
are equipped with a parallel guide fence as 2 (see illustration).
The angle fence 3 can be set to the desired value with the scale (at the
reverse side of the universal guide) and fastened with the wing screw 4.
The universal guide 1 is placed against the workpiece with the angle fence 3
and the guide rail 5 is held in place on the workpiece manually. The MAFELL
machine is introduced into the guide rail 4 with the parallel guide fence 2
and shifted across the workpiece. The universal guide 1 is secured with rubber
strips against slipping and can in addition be fastened on the workpiece
through the holes 5.
-
KSS 300 / KSS 40 18M b
-
KSP 40 Flexistem
-
MT 55 cc
-
MKS 130 Ec – MKS 185 Ec
-
ZSX Ec
-
ERIKA 60 E – ERIKA 85 Ec
-
S 35 M
-
DD40 P / DD40 G
-
EVA 150 E
-
MF 26 cc
-
ZH 205 Ec – ZH 320 Ec
-
LO 65 Ec
-
SKS 130
-
ZK 115 Ec
-
LS 103 Ec
Phone : +49 (0)7423/812-0, Fax +49 (0)7423/812-218,
e-mail: mafell@mafell.de
MAFELL AG ∙ Beffendorfer Straße 4 ∙ 78727 Oberndorf a.N. ∙ Germany ∙
Tel. +49 7423 812-0
Fax : +49 7423 812-218 ∙ E-Mail :
mafell@mafell.de ∙
www.mafell.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>