ATEN KG8900T USB HDMI KVM DigiProcessor Installation Guide
- June 17, 2024
- Aten
Table of Contents
USB KVM DigiProcessor KG1900T / KG6900T / KG8900T /
KG9900T
Installation Guide
Package Contents
USB KVM DigiProcessor KG1900T / KG6900T / KG8900T / KG9900T
| Qty | Description |
|---|---|
| 1 | USB KVM DigiProcessor KG1900T / KG6900T / KG8900T / KG9900T |
| 1 | user instructions |
Installation
To connect a USB KVM DigiProcessor (KG1900T / KG6900T / KG8900T / KG9900T) to
a KVM over IP OmniBus4 Gateway (KG0016 / KG0032), follow the steps below.
Note: A KG8900T USB HDMI KVM DigiProcessor is used as an example to
illustrate the procedure.
- Connect the USB and HDMI connectors of the USB KVM DigiProcessor to the corresponding ports on the PC you are installing.
- Connect the RJ-45 port (KVM port) of the USB KVM DigiProcessor to the KVM over IP OmniBus Gateway’s (KG0016 / KG0032) KVM port via a Cat 5e/6 cable.
- You can secure the USB KVM DigiProcessor to a rack using a cable tie, a screw and a cage nut, or a magic tape.
-
Securing the USB KVM DigiProcessor using a cable tie
Use a self-prepared cable tie, insert the tail through the SR mounting hanger, connect the tail to the strap channel and then tighten the strap to a rack. -
Securing the USB KVM DigiProcessor using a screw and a cage nut
Use a self-prepared screw to screw through the SR mounting hanger to a self- prepared cage nut to secure the USB KVM DigiProcessor to a rack. Please make sure the cage nut is secured to the rack first. -
Securing the USB KVM DigiProcessor using a magic tape
Use a self-prepared magic tape to hold the USB KVM DigiProcessor to a rack.
Compliance Statements
FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
The device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference
that may cause undesired operation.
FCC Caution
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate this equipment.
Warning
Operation of this equipment in a residential environment could cause radio
interference. KCC Statement
Industry Canada Statement
This Class A digital apparatus complies with Canadian ICES-003.
CAN ICES – 003 (A) NMB – 003 (A)
HDMI Trademark Statement
The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo
are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
All information, documentation and specifications contained in this media are
subject to change without prior notice by the manufacturer.
Please visit our website to find the most up-to-date version.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>