StarTech DSKCRNRSLV Desk Corner Sleeve User Guide
- June 17, 2024
- StarTech
Table of Contents
StarTech DSKCRNRSLV Desk Corner Sleeve
Product Information
Specifications
- Product Name : Desk Corner Sleeve – Black
- Product ID : DSKCRNRSLV
- Package Contents :
- 1 Desk Corner Sleeve
- 3 Clamping Plates
- 2 Clamping Plate Guides
- 2 Clamping Plate Screws
- 6 Felt Strips
- Requirements : Wooden desks with a thickness of 0.8in (20mm) or thicker
- Manual Revision : August 24, 2023
- Warranty : Backed by a five-year warranty. For further information on product warranty terms and conditions, please refer to www.startech.com/warranty.
Installation – Screw-in Installation
- Using the Clamping Plate Screws on the Bottom Clamp, adjust the Left and Right Clamping Plates to the approximate thickness of the desk.
- Place the Desk Corner Sleeve centered at the desired corner mounting location.
- Adjust the Clamping Plate Screws until the Clamping Plates make light contact with the underside of the desk.
- Install the Wood Screws through the Mounting Holes on the Clamping Plates. Using a Philips Head Screwdriver, tighten the Wood Screws to fasten the Desk Corner Sleeve to the desk.
Installation – Normal Installation
- Using the Hex Key, adjust the Left and Right Clamping Plates to the approximate thickness of the desk using the Clamping Plate Screws on the Bottom Clamp.
- Place the Desk Corner Sleeve centered at the desired corner mounting location.
- Use the Hex Key to tighten the Clamping Plate Screws until the Clamping Plates are fastened onto the underside of the desk.
FAQ
- Q: What is the maximum thickness of the wooden desk that this product supports?
- A : This product is designed to support wooden desks with a thickness of 0.8in (20mm) or thicker.
- Q: Where can I find additional product information, manuals, and technical specifications?
- A : For the latest manuals, product information, technical specifications, and declarations of conformance, please visit: www.startech.com/DSKCRNRSLV.
- Q: How long is the warranty for this product?
- A : This product is backed by a five-year warranty. For further information on product warranty terms and conditions, please refer to www.startech.com/warranty
Top View
Back View
Installation Top View
Component /Function
Package Contents
- Corner Sleeve x1
- Hex Key x 1
- 4.2x16mm Wood Screws x 2
- Quick-Start Guide x 1
Requirements
For the latest manuals, product information, technical specifications, and declarations of conformance, please visit: www.startech.com/DSKCRNRSLV
- L-shaped desk or table with a 90° angle
- Phillips head screwdriver (Only If doing the Screw-in Installation)
- Wooden desk or table. (Only if doing the Screw-in Installation)
Installation
Screw-in Installation
Warnings!
- The provided screws are for 0.8in (20mm) or thicker wooden desks only. If using a thinner desk, the screws may damage the desk’s top surface.
- Do not over-tighten the mounting screws.
- Using the Hex Key, adjust the Left and Right Clamping Plates to the approximate thickness of the Desk using the Clamping Plate Screws on the Bottom Clamp.
- Place the Desk Corner Sleeve centered at the desired corner mounting location.
- Adjust the Clamping Plate Screws until the Clamping Plates make light contact with the Desk Underside.
- Install the Wood Screws through the Mounting Holes on the Clamping Plates. Using a Philips Head Screwdriver Tighten the Wood Screws to fasten the Desk Corner Sleeve to the Desk.
Normal Installation
- Using the Hex Key, adjust the Left and Right Clamping Plates to the approximate thickness of the Desk using the Clamping Plate Screws on the Bottom Clamp.
- Place the Desk Corner Sleeve centered at the desired corner mounting location.
- Use the Hex Key to Tighten the Clamping Plate Screws until the Clamping Plates are fastened onto the Desk Underside.
Regulatory Compliance
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which this manual applies by the third-party company in question. StarTech.com hereby acknowledges that all trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders. PHILLIPS® is a registered trademark of Phillips Screw Company in the United States or other countries.
Warranty Information
This product is backed by a five-year warranty.
For further information on product warranty terms and conditions, please refer
to www.startech.com/warranty.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss ofprofits, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.
Safety Measures
Assemble this product according to the instructions. Read the entire manual and ensure the instructions are fully understood before assembling and/or using this product.
- StarTech.com Ltd.
- 45 Artisans Crescent London, Ontario N5V 5E9 Canada
- StarTech.com Ltd.
- Unit B, Pinnacle 15 Gowerton Road Brackmills, Northampton NN4 7BW United Kingdom
- StarTech.com LLP
- 4490 South Hamilton Road Groveport, Ohio 43125 U.S.A.
- StarTech.com Ltd.
- Siriusdreef 17-27 2132 WT Hoofddorp The Netherlands