UNITEK V400A USB-C to DisplayPort 1.2 Cable User Manual
- June 17, 2024
- UNITEK
Table of Contents
UNITEK V400A USB-C to DisplayPort 1.2 Cable
Specifications
- Cable Length: 1.8M
- DisplayPort Connector
- USB-C Connector
- Compatibility: Windows XP or later ver., Mac OS X or later ver., Linux
- Resolution: up to 4K@60Hz
Product Overview
- The USB-C to DisplayPort 1.2 Cable is designed to connect your USB-C devices, such as laptops or mobile devices, to monitors or displays with a DisplayPort input.
- With a cable length of 1.8 meters, it provides flexibility in positioning your devices.
Product Usage Instructions
Step 1: Check Compatibility
Before using the USB-C to DisplayPort 1.2 Cable, ensure that your devices meet the following requirements:
- PC, laptop, or tablet with a DisplayPort output
- USB-C port on the device
- Operating system compatibility: Windows XP or later ver., Mac OS X or later ver., Linux
Step 2: Connect the Cable
To use the USB-C to DisplayPort function, follow these steps:
- Ensure that both the USB-C port on your device and the DisplayPort input on your monitor is accessible.
- Connect one end of the USB-C to the DisplayPort 1.2 Cable to the USB-C port on your device.
- Connect the other end of the cable to the DisplayPort input on your monitor.
Step 3: Configure Display Settings
After connecting the cable, you may need to configure your display settings on your device:
- On Windows: Go to “Display Settings” in the Control Panel or Settings app and select the appropriate display options.
- On Mac: Open “System Preferences,” go to “Displays,” and adjust the settings as needed.
- On Linux: Use the display settings provided by your Linux distribution to configure the display options.
FAQ (Frequently Asked Questions)
Q: What is the maximum resolution supported by the USB-C to DisplayPort 1.2 Cable?
- A: The cable supports resolutions up to 4K@60Hz, providing high-quality display output.
Q: Can I use this cable with devices that do not have a USB-C port?
- A: No, the USB-C to DisplayPort 1.2 Cable requires a USB-C port on your device to establish a connection.
Q: What operating systems are compatible with this cable?
- A: The USB-C to DisplayPort 1.2 Cable is compatible with Windows XP or later ver., Mac OS X or later ver., and Linux.
Q: Do I need any additional drivers to use this cable?
- A: In most cases, no additional drivers are required. The cable should work with the native display drivers of your operating system.
- However, it is recommended to keep your operating system up to date for optimal performance.
Product Overview
Cable Length 1.8M
USB-C transmits the signal to DP No reverse transmission
Package Contents
- USB-C to DisplayPort 1.2 Cable
- User Manual
Safety Notes
- Do not attempt to service or repair the product yourself. Leave any service work to qualified experts.
- Do not open the device or continue to operate it if it becomes damaged.
- Do not modify the product in any way. Doing so voids the warranty.
- Keep this product, like all electrical products, out of the reach of children!
Warranty Disclaimer
UNITEK assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product, or failure to observe the operating instructions and/or safety notes.
Technical Data
| Compatibility | USB-C port |
|---|---|
| Systems Supported (PC, Laptop & Tablet) | Windows XP or later ver. Mac OS X or |
later ver.
Linux
DisplayPort output| Resolution up to 4K@60Hz
Note
- To use the DisplayPort function, the device must support DisplayPort Alternate Mode or Thunderbolt3 technology.
Service and Support
- Further support information can be found here: www.unitek-products.com Email: [email protected]
- The crossed-out trash can sign means that the equipment must not be disposed of with other waste.
- It should be disposed of in special containers according to the information prepared by the local government.
- Support Thunderbolt 3 Devices And More Ideal For Demanding Gaming V400A