UNITEK Y-1468 USB 2.0 to Ethernet Adapter User Manual
- June 17, 2024
- UNITEK
Table of Contents
UNITEK Y-1468 USB 2.0 to Ethernet Adapter
Product Specifications
- Cable Length: 15cm
- USB-A Connector
- Ethernet RJ45 (100Mbps)
Compatibility
The USB To Ethernet Adapter is compatible with the following systems:
- Windows XP or later versions
- Mac OS X or later versions
- Linux
Product Usage Instructions
Connect the Adapter
- Plug the USB-A connector of the adapter into an available USB port on your PC, laptop, or tablet.
- Connect one end of an Ethernet cable (not included) to the RJ45 port of the adapter.
- Connect the other end of the Ethernet cable to a compatible Ethernet port on your router or network switch.
Install Drivers (if required)
In most cases, the USB To Ethernet Adapter will be automatically recognized
and installed by your operating system. However, if drivers are required,
follow these steps:
- Visit the official UNITEK website at www.unitek-products.com.
- Search for the USB To Ethernet Adapter product page.
- Download the drivers compatible with your operating system.
- Run the driver installation program and follow the on-screen instructions.
Configure Network Settings
Once the adapter is connected and drivers (if required) are installed, you
may need to configure network settings:
- Go to your device’s network settings.
- Select the Ethernet connection or adapter.
- Set the IP address, subnet mask, and gateway if necessary. These settings are usually obtained automatically from your router via DHCP.
- Save the settings and restart your device if prompted.
Product Overview
Package Contents
- USB To Ethernet Adapter
- User Manual
Safety Notes
- Do not attempt to service or repair the product yourself. Leave any service work to qualified experts.
- Do not open the device or continue to operate it if it becomes damaged.
- Do not modify the product in any way. Doing so voids the warranty.
- Keep this product, like all electrical products, out of the reach of children!
Warranty Disclaimer
UNITEK assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or failure to observe the operating instructions and/or safety notes.
Technical Data
The crossed-out trash can sign means that the equipment must not be
disposed of with other waste. It should be disposed of in special containers
according to the information prepared by the local government.
FAQ
Frequently Asked Questions
- Q: Do I need to purchase an Ethernet cable separately?
- A: Yes, the Ethernet cable is not included with the USB To Ethernet Adapter and needs to be purchased separately.
- Q: What systems are supported by the adapter?
- A: The adapter is compatible with Windows XP or later versions, Mac OS X or later versions, and Linux.
- Q: Can I dispose of the adapter with regular waste?
- A: No, the adapter should be disposed of in special containers according to the information provided by the local government.
Service and Support
For further support information, visit the UNITEK website at www.unitek- products.com or contact support via email at [email protected].