3nStar TR0702A Rugged Table User Manual

: June 17, 2024
: 3nStar

TR0702A Rugged Table

Specifications

Product Name: 3NSTAR RUGGED TABLE
Version: 1.0

Chapter One: Usage Notes

1.1 Attentions of laser scan engine

Laser radiation, please do not look directly at the laser
beam.

1.2 Safety Notice

Make sure to follow all safety instructions provided in the user
manual to ensure safe usage of the product.

1.3 Maintenance Notice

Regular maintenance is required to keep the product in optimal
condition. Refer to the user manual for detailed maintenance
instructions.

Chapter Two: Appearance Instructions

2.1 Front View

2.2 Side View

2.3 Back View

Chapter Three: Keyboard

The new 3nStar Rugged Tablet has 6 keys on the keyboard with 3
keys on the side.

Key	Function
Back key	To return to a higher level or exit application. In the text

input interface, click this button to close the screen
keyboard.
Scan key| 1. In general, as the scan key, scan bar code. 2. In the camera
interface (comes with the camera), as the camera button.
Enter key| 1. Click on this button to enter the application. 2. In the
camera interface (comes with the camera), as the camera
button.
Menu key| 1. Click this button to open the menu for the current
interface. 2. Default short press this button to open/close menu
function, long press this key to no effect.
Home key| 1. Click this button to return to the main screen. 2. Long
press this button to open the default recently used application
switcher, double click this button to have no effect.
Screen direction lock key (With indicator light)| Click on this button to lock the screen direction, so that the
screen cannot automatically rotate.
Volume + key| Click this button to increase the volume.
Volume – key| Click this button to lower the volume.
Power key| 1. Long press Power button to pop up the shutdown and other
options menu. 2. In the system working state, short press Power
key, the device will enter the sleep state. 3. In a dormant state,
short press Power key, the system will wake up and light up the
screen.

Chapter Four: Quick Use

4.1 First Time

Long press the power button to start. In the system working
state, short press Power key, the device will enter the dormancy
state. In the dormant state, short press Power key, the system will
wake up and light up the screen.

4.2 Start Up

Long press the power button until the device vibrates, and the
screen lights up. In the deep sleep mode, press the power button to
wake up the system.

4.3 Turn Off Your Machine

When the machine is turned on, long press the power button for 2
seconds under Non-dormant state to open the options menu. Select
shutdown and click on confirmation for a normal shutdown.

4.4 Restart

When the machine is turned on, long press the power button for 2
seconds under Non-dormant state to open the options menu. Select
restart and click on confirmation for a normal shutdown
restart.

FAQ (Frequently Asked Questions)

```
1. How do I increase the volume?
```

To increase the volume, click on the Volume + key.

```
1. How do I lower the volume?
```

To lower the volume, click on the Volume – key.

```
1. How do I lock the screen direction?
```

To lock the screen direction, click on the Screen direction lock
key (With indicator light).

```
1. How do I return to the main screen?
```

To return to the main screen, click on the Home key.

Reference Manual
New 3NSTAR RUGGED TABLE® PADSeries Data Collection Terminal
New 3NSTAR RUGGED TABLEproduct user manual
Version 1.0
I

Directory
1 Chapter one Usage notes ………………………………………………………………………………………..1 1.1 Attentions of laser scan engine ………………………………………………………………………….1 1.2 Safety notice …………………………………………………………………………………………………..1 1.3 Maintenance notice………………………………………………………………………………………….1
2 Chapter two Appearance instructions ……………………………………………………………………..2 3 Chapter three Keyboard ………………………………………………………………………………………….3 4 Chapter four Quick use…………………………………………………………………………………………..4
4.1 First time………………………………………………………………………………………………………..4 4.2 Start up…………………………………………………………………………………………………………..5 4.3 Turn off your machine ……………………………………………………………………………………..5 4.4 Restart……………………………………………………………………………………………………………5 4.5 Install SIM card ………………………………………………………………………………………………5 4.6 Install SD card ………………………………………………………………………………………………..6 5 Chapter five Charger ……………………………………………………………………………………………..7 5.1 Charging time …………………………………………………………………………………………………7 5.2 Charging temperature ………………………………………………………………………………………7 5.3 Battery power supply ……………………………………………………………………………………….7 5.4 Attentions for using batteries …………………………………………………………………………….7 5.5 LED indicator lamp …………………………………………………………………………………………8 6 Chapter six Main screen …………………………………………………………………………………………9 6.1 Status bar icon ………………………………………………………………………………………………..9 7 Chapter seven Set up ……………………………………………………………………………………………..10 7.1 WLAN …………………………………………………………………………………………………………10 7.2 Bluetooth ……………………………………………………………………………………………………..17 7.3 Flow usage……………………………………………………………………………………………………20 7.4 More ……………………………………………………………………………………………………………21
7.4.1 Airplane mode ……………………………………………………………………………………22 7.4.2 VPN ………………………………………………………………………………………………….22 7.4.3 NFC ………………………………………………………………………………………………….23 7.4.4 Portable hot spot …………………………………………………………………………………24 7.4.5 Mobile Data ……………………………………………………………………………………….25 7.5 Buttons…………………………………………………………………………………………………………26 7.6 Home screen …………………………………………………………………………………………………27 7.7 Status bar ……………………………………………………………………………………………………..28 7.8 Display…………………………………………………………………………………………………………29 7.9 Prompt note and notification……………………………………………………………………………32 7.10 Storage …………………………………………………………………………………………………………32 7.11 Battery …………………………………………………………………………………………………………33 7.12 Application …………………………………………………………………………………………………..34 7.13 System profiles ……………………………………………………………………………………………..35 7.14 Location ……………………………………………………………………………………………………….37 7.15 Security………………………………………………………………………………………………………..37
I

7.16 Accounts ………………………………………………………………………………………………………38 7.17 Language and input method…………………………………………………………………………….39 7.18 Backup &reset ………………………………………………………………………………………………40 7.19 Date and time………………………………………………………………………………………………..40 7.20 Scheduled power on and off ……………………………………………………………………………41 7.21 Accessibility …………………………………………………………………………………………………42 7.22 Developer …………………………………………………………………………………………………….42 7.23 About phone …………………………………………………………………………………………………43 8 Chapter eight Typical application…………………………………………………………………………..46 8.1 Scan tool ………………………………………………………………………………………………………46 8.2 Import APK automatically………………………………………………………………………………50 8.3 System upgrade……………………………………………………………………………………………..52 8.4 Mobile Butler………………………………………………………………………………………………..54 8.5 Hot key settings …………………………………………………………………………………………….60 8.6 Quick configuration ……………………………………………………………………………………….63
8.6.1 Import ……………………………………………………………………………………………….64 8.6.2 Export ……………………………………………………………………………………………….67 8.6.3 User configuration ………………………………………………………………………………69 8.7 Feature Settings …………………………………………………………………………………………….70 8.7.1 Prohibit drop-down menu …………………………………………………………………….70 8.7.2 Disable HOME Key…………………………………………………………………………….71 8.7.3 Restart does not allow unknown sources ………………………………………………..71 8.8 Certificate Whitelist……………………………………………………………………………………….71 9 Chapter nine Troubleshooting ……………………………………………………………………………………74
I

1 Chapter one Usage notes
1.1 Attentions of laser scan engine

beam.

Laser radiation, please do not look directly at the laser

1.2 Safety notice
§ Your devices can only use the battery and charger specified by the company. Any other products may cause the battery leakage, overheating, burst and fire.
§ Charger short circuit is forbidden, otherwise it will cause electric shock, smoke and charger damage.
§ Please do not use the charger when it is damaged in case of power line, otherwise it will cause fire and electric shock.
§ Please do not disassemble or modify the charger, otherwise it will lead to personal injury, electric shock, fire and charger damage.
§ Seize the charger when pull the plug, pull the power cord will damage the power line, causing electric shock and fire.
§ Clean equipment, batteries and chargers with a soft dry cloth. § Please do not use alcohol, thinner, benzene or other solution to wipe the device.
1.3 Maintenance notice
§ This product is waterproof and dust proof, but it still should be kept away from operating in the environment of extremely high or low temperature. Please refer to the product specifications of the temperature and humidity standards.
§ Press the screen hard may damage it. Please do not use resistive screen touching pan to avoid the scratch or damage to the screen. To clean the screen, please send a small amount of the commercial LCD spray cleaner on a soft cloth instead of spraying cleaner directly on the screen.
§ Do not use any chemical cleaning agent to clean the LCD screen.
§ Keep the scanning window form clean, stay away from sharp objects.
1

§ For a long time not to use this product, please be sure to download the data to the computer store, and remove the battery. Please separate machine and battery packaging after storage.
§ The battery will take a long time to compete the charge when it is the first time to work or recovery from storage.
§ In case of machine failure, please note the situation and information and contact with maintenance.
2 Chapter two Appearance instructions
2-1 front view
2

Picture2-2 side view

Picture2-3 back view

3 Chapter three Keyboard

The new 3nStar Rugged Tablet has 6 keys on the keyboard with 3 keys on the side.

Instructions:

Key

Function

Back key

Function instructions
o click ,to return to a higher level or exit application.
o In the text input interface, click this button to close the screen keyboard

Scan key Enter key

1.In general, as the scan key, scan bar code. 2.In the camera interface (comes with the camera), as
the camera button.
1. click on this button to enter the application 2. In the camera interface (comes with the camera), as the camera button.

3

Menu key

1. Click this button to open the menu for the current interface
2. Default short press this button to open / close menu function, long press this key to no effect.

Home key

1. Click this button to return to the main screen 2. Long press this button to open the default recently
used application switcher, double click this button to have no effect

Screen direction lock key
(With indicator light)

Click on this button, can lock the screen direction, so that the screen cannot automatically rotate

Volume + key

Click this button to increase the volume

Volume – key

Click this button to lower the volume

Power key

1. Long press Power button to pop up the “shutdown” and other options menu
2. In the system working state, short press Power key, the device will enter the sleep state
3. In a dormant state, short press Power key system will wake up and light up the screen

4 Chapter four Quick use
4.1 First time
Long press the power button to start. In the system working state, short press Power key, the device will enter the dormancy state, in the dormant state, short press Power key system will wake up and light up the screen.

4

4.2 Start up
Long press the power button until the device vibrates, the screen light up. In the deep sleep mode, press the power button, can wake up the system
4.3 Turn off your machine
When the machine is turned on, long press the power button 2s under Non dormant state, open the options menu, select the shutdown, click on the confirmation, then the normal shutdown.
4.4 Restart
When the machine is turned on, long press the power button 2s under Non dormant state, open the options menu, select restart, click on the confirmation, then the normal shutdown restart.
4.5 Install SIM card
Please install the SIM card for the following instructions: Insert the SIM card in the direction of the icon.
Picture4-1 Insert the SIM card
Note: This device does not support hot plug SIM card, after plugging SIM card need to restart the machine
5

4.6 Install SD card
Please install the SD card for the following instructions: Insert the SD card (microSD or microSDHC) in the direction of the icon.
Picture4-2 Insert the SD card Note : This device supports SD card hot plug
6

5 Chapter five Charger
Due to the battery in the factory has only a small amount of electricity used for test, when you receive the machine you must charging before use. Connect the device to the adapter for charging directly. At the same time, the New 3NSTAR RUGGED TABLEseries also have optional base for charging.
5.1 Charging time
Battery: through the adapter, the battery’s first charge time is about 5 hours, the LED lamp shows red represents charging, power is full when it is green.
5.2 Charging temperature
§ The best operating temperature is room temperature 18~250C. § The battery will not charge if the temperature less than-200C or more than 500C.
5.3 Battery power supply
§ If you turn on the wireless network service or data acquisition program, the battery power will be substantial loss. Please turn off these procedures to save electricity when these functions are not required.
§ In order to avoid the battery power shortage, it is recommended that you work with a battery of electric power, or connect the external power supply.
Tip: if you do not use the product for a long time, please charge at least once every two months.
5.4 Attentions for using batteries
§ If the battery is depleted, it may not be immediately switched on, which is a normal phenomenon. Please continue charging for a while before turning on devices.
7

§ Batteries can be charged repeatedly, but the battery is a consumable product, please replace a new battery if you find the device’s standby time is greatly reduced.
§ Battery charging time change with temperature and battery usage, please charge at a reasonable temperature range.
§ When the battery is in low power, the device will give low – power warnings. When the battery power is too low, the device will automatically shut down.
5.5 LED indicator lamp
§ When LED indicator light is in the middle of the top right of the machine, it indicates the status of the battery and the charging state according to different colors:
§ Without the insertion of USB, charging adapter, red light flashing shows the battery power is low, Please charge as soon as possible.
§ Insert USB cable, charge adapter, long bright red means that the battery is charging.
§ Insert USB cable, charging adapter, the long bright green represents the battery is full of electricity.
§ If the LED indicator light which is on the right side of the machine flash blue just like the breathing light, it means that there’s a message for reading, please check in time.
§ When the LED indicator light is scanned into the bar code, the light flash red once. When the bar code is not scanned, no light flash.
Note: when the system is in charge, the blue indicator light will not be prompted.
8

6 Chapter six Main screen
New 3NSTAR RUGGED TABLE series devices are a total of five main screens, sliding screen to the left or right can be switched on each other. In the application of the main screen display, click any application icon, you can open the program.

Picture6-1 main screen
Table6-1 main screen
Status bar: display notifications and status icons. Display area: used to place the application icon, desktop folder, and window widget. Shortcut: Click to enter the application. Application tray: Click to view all of the programs.

6.1 Status bar icon

Status icon and notification bar icon is located at the top of the screen status bar, it display device status information and notification, as follows.
Table6-2 Status icon and notification bar icon

Icon

Introduction

Icon

Detection of available WLAN networks

Introduction Signal strength

9

Connected WLAN network Portable WLAN Silent mode Vibration mode Missed calls
New messages Capture screen The alarm clock Prepare for microSD card
Bluetooth
Uploading data USB debugging

Not inserted SIM card Mobile network has been
connected Airplane mode
Scan
Battery charge
Battery power is full
Battery power is low Multiple notification icons, beyond the display range
Insert headset
GPS is positioning
Downloading data
USB connect

7 Chapter seven Set up
7.1 WLAN
Find this icon: Settings
1

Wireless and Network WLAN 2.4G Wi-Fi provides the most remote 450 feet (150m), 5G provides the farthest 300 feet (100m) wireless network access range (note, industrial grade AP, open area). To use the Wi-Fi on your device, you must connect to a wireless access point or hot spot. Note: the availability of the Wi-Fi signal is determined by the amount of the required number, the infrastructure, and the object to which the signal is penetrated. Open Wi-Fi and connect to a wireless network 1.Click WLAN to close / open the button to open the Wi-Fi. Automatic scanning available wireless networks 2.Then the Wi- Fi network list will show the network name and security settings of the Wi-Fi network to be found (open network or encrypted network) 3.Touch one of the Wi- Fi networks to make a connection. When you select an open network, it will automatically connect to the network. If you choose a network, you must enter the appropriate password first, and then touch the connection.
Click to connect to the network Click to open and search the network
Picture7-1 Wi-Fi menu
4.Set the WLAN band ([advanced] (short press menu to entry) —- > [WLAN band]),
1

choose to use only the 5GHz band can only search to 5GHz band of AP.
Picture7-2 WLAN Frequency band
5.Wi-Fi roaming trigger, delta can be through the advanced settings according to customer demand for their own set ( in the Wi- Fi search interface short press menu button —- > Advanced).
Picture7-3 WLAN Roaming settings
(1)Roaming trigger: when the connected AP (Note: the premise is in roaming environment) signal value is lower than the set trigger, roaming mechanism will be triggered, as shown in figure will go on a tour of the threshold setting is -65dBm. When below this value when roaming is triggered.
1

Picture7-4 Roaming trigger
(2)Roaming delta: when the difference between the two AP signal value reaches the set value, roaming connected to the signal value better AP, such as when two AP between signal value difference is greater than 5 dBm (to meet the standards of the roaming trigger), then the normal roaming.
Picture7-5 Roaming delta
6.WIFI work mode configuration, support the module to configure the fixed mode of operationa/b/g/n,the default is 802.11AUTO;
1

Picture7-6 Wi-Fi work mode configuration 7.WIFI DATA RATE: support rate control, the default is Data Rate AUTO.
1

Picture7-7 WIFI DATA RATE 8. WIFI AGC MODE. AGC RX control functions to adapt to the noisy environment, reception inefficiency problem, to reduce interference, the default is MODE OFF.
Picture7-8 WIFI AGC MODE
9. About Wi-Fi status information, you can view the relevant information through the Wi-Fi status information, click stats Refresh, such as: Wi-Fi state, the connection of AP, signal value, MAC address, etc., as shown in figure:
1

Picture7-9 Wi-Fi status information
Note: when the device is connected to a wireless network, the status bar will display the Wi-Fi

icon (

), and display a roughly the amount of the signal intensity (light from the bar). If the

touch device is currently connected to the wireless network, it will show the Wi-Fi network name, state, speed, signal strength, security information and IP address.

If you want to remove the wireless network settings on the device, long time to click on the connection of the AP, choose not to save the network, then the AP will be deleted, as shown on the right:

Picture7-10 Delete or modify the network
1

Note: after the Wi-Fi switch, the device must be connected to the previously connected encrypted wireless network, you do not need to reenter the appropriate password. Wi-Fi network will search for themselves, that is, the device does not need to perform additional steps can be connected to the Wi-Fi network.
Connect to other Wi-Fi networks
§ Open interface in wireless Wi-Fi, touch scan. Find the Wi-Fi network will be displayed in the Wi-Fi network list.
§ Touch other Wi-Fi network, you can connect to the network.

7.2 Bluetooth

Find this icon:

ü

Settings

ü

Wireless and Network

ü

Bluetooth

1. Point on the blue / open button, open and search for other Bluetooth devices

2. In the search for the device list, click on the device to connect to the device

3. After the input PIN code is entered in the pop-up dialog box, click the connection

device

Click to open and search for

Bluetooth

1

Picture7-11 Bluetooth menu
4. Paired with a successful device, click on the right side of the set button to rename and cancel the device to the device and other options, according to the needs of the corresponding operation:
Picture7-12 Paired Bluetooth device settings
5.Bluetooth transfer: you can choose to send the file, pictures, video, MP3 and other documents, through Bluetooth, such as: share MP3, select a MP3, long press the MP3 to share, the share of the interface select the right Bluetooth, the details of the interface, click send, as shown below:
1

Picture7-13 Bluetooth transmission
6.At the time of sending, the upper left screen has an arrow mark , which can drop down to observe the transmission, as shown in the following figure:
Picture7-14 Bluetooth transmission schedule
7.File to complete the corresponding prompt.
1

Picture7-15 Bluetooth shared results
8.Bluetooth headset, Bluetooth headset can be used for voice communications, multimedia player, etc.
7.3 Flow usage

Find this icon:

ü

Settings

ü

Wireless and Network

ü

Flow usage

Choose to open the mobile data, set the mobile data traffic restrictions.

2

Picture7-16 Flow usage

7.4 More

Find this icon:

ü

Settings

ü

More

2

Picture7-17 More menu
7.4.1 Airplane mode
Check the Airplane mode, the wireless module will automatically shut down.
7.4.2 VPN
After starting VPN, you need to add the VPN private network (for example: want to access the company’s internal file servers and other network shared resources), no matter where you can connect to the company’s VPN server through the VPN client, after obtaining the VPN account can be accessed through the VPN client side, after dialing the company can access the shared resources.
2

Picture7-18 VPN setting
7.4.3 NFC
NFC function, open the feature, allowing the phone to switch to other devices when the data, as long as their own equipment and other supporting NFC devices rely on together, that can be used to synchronize your application content to each other. At the same time, the installation of third party NFC software, you can read and write RF card operation.
2

Picture7-19 NFC function
7.4.4 Portable hot spot
(1)Portable hot function, the machine as a Wi-Fi hot spot, for a certain range of the surrounding Wi-Fi module of the mobile phone and computer to provide access. (2)Set up–More–Network sharing and portable hot spot–Portable WLAN hot spot–Start, as shown in figure:
Picture7-20 Portable hot spot settings
2

(3)Configure a portable hot spot, as shown in figure:
Picture7-21 Modify WLAN hot spot
(4)Search to the other side of the hot spots, enter the appropriate password can share the machine’s hot network.
7.4.5 Mobile Data
1. Enable Mobile data network: Settings- – >Data usage- – >Mobile data network, enabled data traffic, will be related to the flow of statistics related to the cost of mobile data
2

Picture7-22 Enable Mobile data network 2. Data roaming: after entering the roaming environment, data communication can
be directly switched to the roaming state.
Picture7-23 Data roaming 3. Network mode: insert different SIM card, automatically according to the type of
SIM card to identify network. Default network type support 2G/3G/4G. Therefore, the insertion of different SIM cards, in the case of mobile data open, can be based on the current network environment registered on the network. 4. Network operators: Search for network operators resources to the current environment
7.5 Buttons
Find this icon:
2

ü

Settings

ü

Buttons

Can be achieved on the main screen keys and menu key behavior settings, such as

Picture7-24 Buttons

7.6 Home screen

Find this icon:

ü

Settings

ü

Home

Can choose a Launcher or Mobile butler as home screen, press the HOME button to

enter the home screen is selected, the default for Google starter

2

.
Picture7-25 Home screen
7.7 Status bar
Find this icon: Settings
Status bar
Display battery status: check the status bar shows the percentage of the battery, do not check is not displayed, as shown in Figure
2

7.8 Display

Picture7-26 Status bar

Find this icon:

ü

Settings

ü

Display

1Brightness, can be moved around the cursor to adjust the backlight, automatic adjustment of brightness: According to the ambient light conditions to optimize the
brightness

Picture7-27 Display
2. Wallpaper, after entering, can be arbitrarily set to the source of the wallpaper to modify. live wallpaper: System default comes with a dynamic picture, Gallery: Photo on an album or memory card, Wallpaper: Default comes with the system.
2

Picture7-28 Wallpaper
3. Sleep; change the system sleep time settings, set the time to post, the system will automatically sleep.
Picture7-29 Sleep
4. Font size, according to their own needs to adjust the system font size
3

Picture7-30 Font
5. Device rotation, Rotating screen content direction: Automatic rotating screen, according to the rotation angle of horizontal and vertical screen switch,Keep the current direction: Keep the vertical screen, do not change with the rotation angle.
Picture7-31 Device rotation
3

7.9 Prompt note and notification

Find this icon:

ü

Settings

ü

Prompt note and notification

Volume, cell phone ring tones and default notification tone settings, you can also use

the open or close to select or cancel a call ringing and vibration, dial tone, keyboard

lock screen touch tone, tone and touch vibration etc. As shown in the following figure:

7.10 Storage

Picture7-32 Prompt note and notification

Find this icon:

ü

Settings

ü

Storage

Can view the available internal storage space and select the option to scan the external

memory card or the external USB device.

3

Picture7-33 Storage

7.11 Battery

Find this icon:

ü

Settings

ü

Battery

Can view the current capacity of the battery and the use of time.

3

Picture7-34 Battery
7.12 Application
Find this icon Settings Application
Management application: Click the directory (download, SD card, running or all), and select the application you want to uninstall, you will enter the following interface, click the uninstall, and then you can remove the application from the tablet.
Picture7-35 Application
3

7.13 System profiles
Find this icon: Settings System profiles:
1. Change scene mode Select a scene mode, click on the left side of the radio button to enable this mode
Picture 7-36 System profiles
2. Create scenario mode Click on the bottom right corner of this icon , add the corresponding trigger or do not add, click on the next step to enter the settings interface, enter a new scenario mode name in the text box. Set the options for the new scenario mode, click Finish.
3

Picture 7-37 Create scenario mode
3. Delete scene mode Click the right set button to enter the settings interface, click the upper right corner to set the button or press the Menu button, click Delete.
Picture 7-38 Delete scene mode
3

7.14 Location
Find this icon: Settings Location
Check the location of the Google service, GPS positioning function to open, can download the third party positioning software
Picture7-39 Location
7.15 Security
Find this icon: Settings
Security
Set the screen lock mode, the main information, encryption phone, display password, device manager, unknown source, unknown source application installation password settings, etc.
3

Picture7-40 Security
For unknown source applications, the default system is to limit the installation of the system, if you want to install, check the unknown source options, check the process will prompt input password, enter the corresponding password to install the corresponding application(Default password: 4007770876). This feature will be reset after the next reboot of the device is not checked. The corresponding password can be changed in the unknown source application installation password settings.
7.16 Accounts
Find this icon: Settings
Accounts
Set up account and synchronization information, Can synchronize contact information, calendar, etc., to other products in the cloud, need to set up the account and server
3

Picture7-41 Accounts
7.17 Language and input method
Find this icon: Settings
Language and input method
Language selection, spell checking tools, and personal dictionaries, choose your favorite keyboard and input method, and set the text to the language output, pointer speed, if you install the other input method, will display in this interface.
3

Picture7-42 Language and input method
7.18 Backup &reset
Find this icon: Settings Backup &reset
Backup or restore data, restore factory settings
Picture7-43 Backup &reset
7.19 Date and time
Find this icon: Settings
Date and time
You can use the time or time zone provided by the network, or manually set the date and time, select the time zone, you can also select the time and date display format.
4

Picture7-44 Date and time
7.20 Scheduled power on and off
Find this icon: Settings
Scheduled power on and off
Here you can set the system automatically shut down and boot time.
Picture7-45 Scheduled power on and off
4

7.21 Accessibility
Find this icon:
Settings Accessibility
You can set the system here, subtitles, amplifying gestures, large font and high contrast text, press the power button to end the call, text automatically rotate screen, say password and no shortcuts, obstacles to speech (TTS) output and touch and hold the delay.
Picture 7-46 Accessibility
7.22 Developer
Find this icon: Settings Developer Settings- – >About phone- – >Build number,Multiple clicks on Build number, pop up password prompt box, enter the password 4007770876, you can open the developer options, you can get some other information on the device, Android universal.
4

Picture 7-47 Developer
7.23 About phone
Find this icon: Settings About phone Device details:
4

Picture 7-48 about phone
1. Updater: remote upgrade system can be realized 2. State information view battery status, battery power, SIM card status, IMEI information, IP address, MAC WLAN address, Bluetooth address, serial number and the boot time 3. Model number: display the model of the device 4. Processor information: processor model 5. Function number: display the number of the device’s function 6. Android version: Android system version 7. Baseband version: Device kernel information 8. Kernel version: Kernel version number 9. Serial Number: Display the S/N number of the device 10. Build number: Device system software version
4

Picture 7-49 Status information
4

8 Chapter eight Typical application
8.1 Scan tool
1.Find this icon , access to the interface
Picture8-1 Scan tool main interface
2 Select [Barcode], then you can enter the bar code type setting interface to set up the type of bar code.
4

Picture8-2 Bar code setting
3 Open [Basic settings], you can scan duration, angle, time, etc.:
4

Picture8-3 Basic settings
4. Open [Settings], you can set up the basic switch scanning, as shown in figure 8-4: (1) Scan sound: open the scan will have a sound tip (2) Vibrate: open the scan will shake tip (3) Append: the bar code can be continuous output (4) Auto Clear: scanning bar code will be automatically cleared on a bar code (5) Booted start: open the boot automatically when open scanner (6) Show type: open the bar code scan to display type (7) Filter invisible Char: To open can filter the invisible characters in the bar code. (8) Stop scan on up: When the scanning key is lifted, the scanning light is extinguished immediately, after closing, the scanning light is raised and the scanning light is extinguished (9) Loop scan: open, the scanning will be automatic continuous scanning (10) Interval time: to set the time, scan the bar code to complete the next bar code scanning interval time (11) Restore: Can restore the bar code default settings (12) Suffix: Can add their own bar code output suffix (can be numbers, letters, special characters, etc.) (13) Prefix: Can add their own bar code output prefix (can be numbers, letters, special characters, etc.) (14) End Char: Can choose the end of the bar code output, including: Tab, Space, Enter, None (15) Barcode Send Model: To focus on the choice of input, broadcast mode, analog keyboard or clipboard to send (Analog keyboard needs to choose the input method to support the hard keyboard), The focus of input method can choose the end of the button to send the button
4

(16) Developer: Input password: 888888, Developer items can be modified (not recommended)
Picture8-4 Application settings
4

Picture8-5 Restore bar code default settings Picture8-6 EmuKey settings
Picture8-7 Developer options
5. Program hide or exit (1) Select [hide], the program is running in the background, in any editing interface can be scanned by scanning; (2) Select [exit], the program will exit off.
Picture8-8 Hide and exit
8.2 Import APK automatically
This product for the convenience of customers to install APK files, to provide the bulk of the installation, and this function in the equipment to restore factory settings will be automatically installed. 1.Create a new folder called “appBackup” in the root directory of the external SD card, put the application APK source need to be installed under the directory, insert external SD card into the device
5

Picture8-9 New appBackUp folder
2. Enter the dialing interface, input “#911#”, enter the AppBackupCopy application, as shown in the following figure:
Picture8-10 AppBackupCopy
On the right side shows the external SD card /AppBackup placed under the APK directory, the left side is the path you want to copy, can choose to copy to OEM/Persist, and click to copy to complete the copy. As shown in the following
5

figure:
Picture8-11 AppBackupCopy
3.Select [Settings] —- > [Backup&reset] —- > [Factory data reset] —- > [Reset phone] —- > [Erase everything].
Picture8-12 Automatic installation
4.Device to restore the factory set to restart after the completion of the “appBackup” directory will be launched under the APK silent installation
8.3 System upgrade
This application is convenient for customers to achieve remote upgrade.
5

1.Find this icon:

,enter System upgradeor enter Settings—->About phone

—->System upgradeas shown below:

Picture8-13 System upgrade
2 Under the circumstance of network unobstructed, click the check Update button, if no update will prompt the current version for the latest version; if there are updates will be prompted to find a new version, click to enter the download interface. 3 Click on the download, after successful download, click on the update immediately then the device automatically restart to enter the upgrade state. When the power is less than 30%, cannot be upgraded 4 System upgrade settings, as shown in Figure.
5

Picture8-14 OTA setting
8.4 Mobile Butler
This product in order to achieve the customer’s needs to set up the Android handheld terminal authority, not permit for the use of non-specified APP. 1.Enter settings–>Home, select Mobile Butler:
Picture8-15 Default launcher setting
2.Administrator settings and change password (1)Open application, press Menu key to add Desktop Project operation.
5

Picture8-16 Not set password interface
(2)You need to set the administrator password first, click on the [confirm] to pop up password set input box.
Picture8-17 Initial password settings
In accordance with the requirements of setting up the administrator password, such as: 123456 note: not for air. (3) Press the Menu key again, as shown below:
5

Picture8-18 Password input interface
Enter the corresponding administrator password (123456). Then you can be verified by the emergence of the following figure:
Picture8-19 Add application interface
Select the application to add to the [Desktop], click the Confirm to complete the
5

addition; select an application [Self-start], the device will automatically start the application (Note: boot from start the current only support one), as follows:
Picture8-20 main screen (4) Administrator, password change Input correct password, click Settings interface, click Modify password to appear to modify the password screen:
5

Picture8-21 Change password
(5) Administrator, name change Get into the settings, you can modify the Mobile Butler name.
Picture8-22 Change the name
3.Wallpaper replacement Enter [Settings] interface, click on the [Wallpaper], the following figure:
5

Picture8-23 Change the wallpaper
4 Security settings Set password protection (optional),as shown.
Picture8-24 Security settings 5 Allow new app added by default<—>Do not allow new app added by default Choose Allow new app added by default, after entering the Mobile Butler to install the application, are displayed on the Mobile Butler desktop. If choose Do not allow
5

new app added by default, then application that is installed will not be displayed on the desktop. Note: the application of online upgrade is not a new application”.
6.Desktop display menu button<—> Desktop does not display menu button Control whether the desktop display menu button, when you choose Desktop display menu button, then display this menu on the desktop, click the menu option: Set/Exit

Picture8-25 Menu button Set: Directly enter the Mobile Butler set interface(Need password authentication) Quit: Exit the mobile housekeeper, back to default and the beginning of the launcher system(The device in the first to enter the Mobile Butler default starter options by default)
8.5 Hot key settings
This application is used in the setting of shortcut keys (Fn), which is convenient for customers to use frequently.

1.Find this icon:

,enter the hot key settings interface;

6

Picture8-26 The main interface of ShortCut key settings
2.ShortCut key settings, click the Fn key (such as: F2) to enter the setup interface, as shown below:
Picture8-27 Add hot key interface
Select the appropriate application, as shown in the following figure:
6

Picture8-28 Set ShortCut Key successfully
3.Remove ShortCut Key, press the Fn key (such as: F2), while the following interface appears:
Picture8-29 Remove ShortCut Key
6

Click [Unregister hot key], you can cancel the hot key settings, click [Cancel] to exit. 4.Use the hot key to get into the modulation Fn key mode, namely Fn button lights, then press F2-F10 on the keyboard.
8.6 Quick configuration
This application in order to achieve the same type of equipment, the configuration of a device to quickly copy the information to another device, so that the two devices related to the same configuration.
Different types of equipment cannot achieve the configuration of the import operation. Find this icon: , enter the Once Configure interface.
Picture8-30 Once Configure main interface
6

8.6.1 Import
1. Import File Put the compressed package on the external SD card specified directory that meets the conditions of the configuration. External SD card system path is: SD card/SysSetting/ Setinfo.tar.gz (1) Manual import:
1Put the compressed package(File name is Setinfo.tar.gz ) into the external SD card / SysSetting directory, as shown in Figure
Picture8-31 Configuration compression package directory
2Enter Once Configure, clickImport File, Pop up as followsclickConfirm
6

Picture8-32 Import File
3) After the success of the import file into the project as well as the status, click on the confirmation, pop-up restart tips, click [immediately restart] to complete.( If you do not restart the configuration will not be effective immediately)
Picture8-33 Restart now
2.Import QR This function can be achieved by scanning the two-dimensional code in the form of
6

external configuration file import, you can call camera scan other external two-dimensional code into the configuration file. (1) Enter Once Configure, clickImport QR, put the two-dimensional code to be imported into the scanning frame, as shown below:
Picture8-34 Two dimensional code import window
(2) Scan after successful transmission, the pop-up two-dimensional code into the project as well as the state, after the confirmation, popping-up restart prompt, click [immediately restart] to complete. ( If you do not restart the configuration will not be effective immediately)
Picture8-35 The interface after successful transmission
6

Note: if the two dimensional code density is too large, it will prompt resolution failure.
8.6.2 Export
1 Export file This feature can be configured to quickly configure all of the configuration items
are exported to the external SD card specified directory. The name of the export file is Setinfo.tar.gz, the path is: SD card/SysSetting (1) Enter Once ConfigureclickExport File,Pop up the following interface to show success. External SD card in which there is a configuration file, the export will give tips, and once again the import will be covered by the original.
Picture8-36 File export
(2) The exported file name is Setinfo.tar.gz, enterFile Manger—->SD card—-> SysSetting
6

Picture8-37 File export path
2. Export QR Two-dimensional code to generate two-dimensional code, by scanning the
two-dimensional code to connect the Bluetooth channel, to transfer profile. (1) Enter the Once Configure, click on the “Export QR”, the following interface to show the success:
6

Picture8-38 Export QR
(2) Generated two-dimensional code image in the bottom of the application, click on the Export QR small icon, and slide around you can view the two- dimensional code
Picture8-39 Two dimensional code picture
8.6.3 User configuration
1.User Config file Name: UserConfig.xml Storage location: External SD card/SysSetting/UserConfig.xml
Example:
<?xml version=”1.0″ encoding=”UTF-8″?>
<project desc=”MobileBulter” desc_zh=”Mobile Butler”>

/data/data/com.cn.seuic.homedemo/databases/homeApp.db3 /data/data/com.cn.seuic.homedemo/files/wallpaper.png /data/misc/wifi/wpa_supplicant.conf des : Set option default name des_zh Set option English name Path Set option configuration path(Can set more, such as Mobile Butler) Note: if there are other languages, add the appropriate name, format: des_ Standard language abbreviation= Corresponding language configuration name 6

2. User configuration file export Place the user profile in the specified location to meet the requirements of the document.
8.7 Feature Settings
This application is used for the rapid realization of customer’s special requirements, to facilitate the rapid use of customers
Picture8-40 Two dimensional code picture
8.7.1 Prohibit drop-down menu
This function is open: This function takes effect immediately, cannot drop down menu.
This function is off: This function takes effect immediately, you can drop down menu.
7

8.7.2 Disable HOME Key
This function is off:

Home key

on the hardware keyboard is available, click to return to the main

desktop. This function is open:

Home key

on the hardware keyboard is not available, click with no

reaction, it has been disabled.

8.7.3 Restart does not allow unknown sources
This function is off: Restart device, unknown source won’t be cancelled, you can install APK directly, no need to enter the password again.
This function is open: Restart device, unknown source is cancelled, re-install APK need to re-enter the password.

8.8 Certificate Whitelist
This software is used to import specified app certificate into Whitelist. If an apk is signed by certificate in Whitelist, it can be installed while system settingUnknown Source is not checked. The password is:20020322.

7

Picture8-41 Certificate in Whitelist 1.Import Certificate From Apk
The application will search for all APK files within the directory of the internal storage device, and display the file name and directory. The user clicks the import button to import the certificate in the selected APK file to the system when the single or multiple item is selected.
Picture8-42 APK file import list 2.Import Certificate From Package installed
The name of the third party APP that has been installed in the display system and its package name, the user clicks the import button to import the certificate in the selected APK file to the system when the single or multiple item is selected.
7

Picture8-43 Installed package name list 3.Remove certificate The application will display the name of the certificate that has been added. Check a single or multiple display items after the click [Remove] the corresponding certificate from the system to remove the white list. Displayed as gray and non – check box display items for the system default certificate, cannot be deleted.
7

Picture8-44 Signature white list category Note:
The added certificate will be named after the name of the APP package. Certificate with the same contents as the package name, save only one record, and named after the first record.
9 Chapter nine Troubleshooting

Problems

Reasons

Solutions

Press the power button,

9/9HC

3NSTAR

RUGGED TABLE is

not on the boot

Battery power is too low or not charged Battery installation is not correct
System crash

Charge or replace the battery Properly installed battery
Soft reset

Battery failure

Replace battery

Rechargeable batteries no longer charge

Battery temperature is high / low

too

The battery normal environment.

is in the temperature

No sound

Volume too low or off

Adjust the volume

3NSTAR RUGGED 3NSTAR RUGGED TABLE After a period of

TABLE 9/9HC off by 9/9HC is in a state of inactivity, the mobile data

itself

inactivity

terminal will be closed. set

7

The bar code is not decoded when read in 3NSTAR RUGGED TABLE 9/9HC

Cannot find any

Bluetooth

devices

nearby

Cannot connect to AP

Battery dies
Scan tool is closed
In the bar code settings or application settings interface
Bar code is not readable
No bar code decoding function
The bar code type is not supported on 3NSTAR RUGGED TABLE 9/9HC The distance between the 9/9HC 3NSTAR RUGGED TABLE and the bar code is not appropriate.
Too far from other Bluetooth devices
Nearby Bluetooth devices are not open Bluetooth device is not in the discovery mode Show the problem of “authentication”

to 15S to 30Min, or never sleep. Charge or replace the battery Load scan application in 3nStar Rugged tablet 9/9HC Set the scanner to the scan interface, or hide the scanner To ensure that the bar code has no defects Enter the bar code settings, open the corresponding decoding

3NSTAR

RUGGED

TABLE 9/9HC is placed

in the correct range.

Move equipment to other Bluetooth devices, 10 meters (32.8 feet) apart. Open Bluetooth devices to find Set the Bluetooth device to the discovery mode

WLAN password is wrong

Show “no storage device” Exit USB mode

Cannot take pictures
Cannot use mobile data access

Show “camera malfunction”
Prompted the insufficient SD card space” Mobile data is not open Network mode selection is not correct, not registered on

Close the two dimensional, two-dimensional camera cannot open the light Clear memory or switch storage location Enter settings, enable data network Enter settings, select the correct network model

7

the SIM card SIM card arrears

Recharge the SIM card in time

Optional accessories
Please keep the original packing box and packing material in order to repair or storage the machine in the future. The following attachments can better improve your work, you can choose according to need.
3NSTAR RUGGED TABLE PAD series product Apad power adapter

Apad USB cable

Apad Hand Belt

7