3NSTAR SC455 Wireless Handheld Barcode Scanner 2D USB with Base User Manual
- June 17, 2024
- 3nStar
Table of Contents
SC455
Wireless Handheld Barcode Scanner
2D USB with Base
User Manual
Scanner Overview
Cable Plug & Unplug
Cable Connection Guide
Scanning Method and Distance
Chargind Method
Wireless Settings
Setting Step
Note: All functions must be in accordance with the settings for The above
process or scan the bar code setting function is invalid.
Pairing Guide
Method:
First step: Insert the cradle as above picture. the green light of the cradle
will continue ( on not able to pair when green light flashing.),
Second step: After insert the cradle, it must be scan the below bar code
within 20s
(1)Transmitter (Scanner)
Working mode
Note:
Real time mode: Scan and transmit data will automatically lost if upload
failed.
Cache mode: Same as real time mode if connection normal. Scan bar codes will
be automatically restore if connection failed. Will upload one by one if
connection return as normal.
Inventory Mode: Scanning bar codes will be restored without upload.
Will upload once scan “Upload data” barcode.
Will clear once scan “Clear data” .
Will check sum once scan” Data sum” .
Inventory mode setting
Following working mode can be set directly.
Upload data: Bar code data will transmit to terminal once scan this bar code.
Date sum: Scan “Data sum” bar code to check the scanner restore data sum.
Clear data: Scan “Clear data” and clear all the restore data in scanner
3- Sleep Time Setting
The sleep time means the time between the last operation move and auto turn
off the scanner. User able to scan the corresponding bar code of the sleep
time which is needed to accomplish the sleep time setting.
Sleep time setting process:
Step1 :Scan” SET “bar code, enter setting.
Step2:Scan the corresponding sleep time bar code to accomplish the setting.
Step3:Scan “END “bar code, finish setting.
Receiver (Cradle)
Set interface mode
Receiver(Cradle) can upload data via USB keyboard or Rs232.
Default is USB keyboard
Barcode Settings
Scanning Mode
If the Trigger Mode is enabled, you could activate the scanner by providing an external hardware trigger or using a serial trigger command
This set the scanner to work in Continue mode.
Set Suffix
code 39 Setting
Illumination
Light
| LED Status | Description |
|---|---|
| Scanner | |
| Red light turn green | power on |
| Red light blinks | Pairing match |
| Green light blinks once | Upload successfully |
| Green light blinks twice | Upload failed |
| Green light on | Working normally |
| Red light on | Low battery |
| Blue light on | Charging normal |
| Green light on | Charging complete |
| Green light blinking | Pairing unsuccessful |
| Cradle | |
| Green light blinks 30s | Pairing state |
| Red light on | USB identify failed |
| Green light blinks once | Uploaded successfully |
| Green light on | Working normally |
Buzzer
| Scanner beeper mode | Description |
|---|---|
| Four Beeps | power On |
| Short three beeps | Pairing successfully |
| Short one beep | can and transmit successfully |
| Short three beeps | Data upload failed |
| short one beep | Power off |
| Long short beep | Enter Setting Mode |
| Craddle beeper mode | Description |
| --- | --- |
| Four Beeps | power On |
| Short one beep | Scan and transmit successfully |
Troubleshooting Q&A:
Q1.:Cradle upload data via RS232,no data display when scan bar code.
A 1: Should confirm interface is RS232(Refer to Interface Setting Mode).Should
confirm scanner baud rate is same as Rs232 software.
Q2:Upload data via USB, no data upload and alarm buzzer after scanning bar
code.
A2: Set scanner upload data interface as USB. Set scanner working mode as real
time mode.
Q3:Cradle LED not on when upload data via RS232.
A3: Refer to “Cable connection guide” to check power supply.
Documents / Resources
|
3NSTAR SC455 Wireless Handheld Barcode Scanner 2D USB with
Base
[pdf] User Manual
SC455 Wireless Handheld Barcode Scanner 2D USB with Base, SC455, Wireless
Handheld Barcode Scanner 2D USB with Base, Handheld Barcode Scanner 2D USB
with Base, Barcode Scanner 2D USB with Base, Scanner 2D USB with Base
---|---