AIDA UHD-200A 4K 60p POV Camera Installation Guide

AIDA UHD-200A 4K 60p POV Camera

Product Information

Specifications:

• Model: UHD-200A
• Resolution: 4K 60p
• Manual Version: 1.0 / April 2020
• Manufacturer: Unknown

Product Usage Instructions

1. Safety Precautions

Before using the UHD-200A camera, it is important to take note of the following safety precautions:

• Do not open the camera as it may cause electric shock. Refer servicing to qualified service personnel.
• Avoid exposing the camera to rain or moisture to prevent fire or electric shock hazards.
• Use only the specified adapter mentioned in the specification sheet to avoid potential fire, electrical shock, or product damage.
• Ensure a secure connection of the power cord to the power receptacle to prevent fire.
• Avoid placing conductive objects or containers filled with water on top of the camera to prevent personal injury.
• Avoid installing the camera in humid, dusty, or sooty locations to prevent fire or electric shock hazards.
• If any unusual smells or smoke come from the unit, stop using it immediately and disconnect the power source. Contact the service center for assistance.
• In case of product failure, contact the nearest service center. Do not disassemble or modify the product.
• When cleaning the camera, do not spray water directly onto its parts as it may cause fire or electric shock.

2. Power Supply

Follow these instructions when applying power to the UHD-200A camera:

• Always refer to the operations guide for the correct power supply information. Applying power incorrectly can result in fire or equipment damage.
• If fumes, smoke, or a strange odor is emitted from the camera or if it does not seem to function correctly, disconnect the power source immediately and consult with your supplier.

3. Image Quality

Consider the following factors to ensure optimal image quality:

• Avoid installing the camera close to a TV, radio transmitter, magnet, electric motor transformer, or audio speakers as the magnetic field generated may interfere with or distort the image.
• Avoid fluorescent light reflections, unstable light conditions, direct sunlight exposure, spotlights, or other bright lights and light reflecting objects when operating the camera.

4. Handling

To prevent damage to the UHD-200A camera:

• Avoid dropping the camera or subjecting it to strong shock or vibration.

FAQ

Q: Can I use a different adapter with the UHD-200A camera?

A: No, it is important to use only the standard adapter specified in the specification sheet. Using any other adapter may cause fire, electrical shock, or damage to the product.

Q: What should I do if I notice unusual smells or smoke coming from the camera?

A: If you notice any unusual smells or smoke coming from the camera, immediately stop using it and disconnect the power source. Contact the service center for assistance as continued use in such a condition may cause fire or electric shock.

Q: Can I clean the camera by spraying water directly onto its parts?

A: No, spraying water directly onto the camera’s parts may cause fire or electric shock. When cleaning, follow the recommended cleaning methods mentioned in the user manual.

CAUTION:

RISK OF ELECTRIC SHOCK. DO NOT OPEN.

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER- SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL

• WARNING
  This symbol indicates that dangerous voltage consisting a risk of electric shock is present within this unit

• PRECAUTION
  This exclamation point symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING

To prevent damage which may result in fire or electric shock hazard, do not expose this appliance to rain or moisture.

1. Be sure to use only the standard adapter that is specified in the specification sheet. Using any other adapter could cause fire, electrical shock, or damage to the product.
2. Incorrectly connecting the power supply or replacing the battery may cause an explosion, excessive heat or fire
3. Securely plug the power cord into the power receptacle. Insecure connection may cause fire.
4. Do not place conductive objects (e.g. screwdrivers, coins, metal items, etc.) or containers filled with water on top of the camera. Doing so may cause personal injury due to fire, electric shock, or falling objects
5. Do not install the unit in humid, dusty, or sooty locations. Doing so may cause fire or electric shock
6. If any unusual smells or smoke come from the unit, stop using the product. Immediately disconnect the power source and contact the service center. Continued use in such a condition may cause fire or electric shock.
7. If this product fails to operate normally, contact the nearest service center. Never disassemble or modify this product in any way.
8. When cleaning, do not spray water directly onto parts of the product. Doing so may cause fire or electric shock.

PRECAUTION

Please read this Operation Guide before installing and using the camera & retain this copy for your reference.

1. Always follow the instructions in the operations guide when applying power. Fire and equipment damage can occur if power is applied incorrectly. For the correct power supply,refer to the specifications page.
2. Do not use camera if fumes, smoke or a strange odor is emitted from the camera, or if it seems not functional correctly. Disconnect the power source immediately and consult with your supplier.
3. Do not use the camera in extreme environments where high temperatures or high humidity exists. Use the camera under conditions where temperatures are between 32°F ~ 104°F, and humidity is below 90%.
4. If installed close to a TV, radio transmitter, magnet, electric motor transformer or audio speakers the magnetic field generated may interfere with or distort the image.
5. Try to avoid fluorescent light reflections, unstable light conditions, direct pointing toward the sun. Use caution when operating the camera in the vicinity of spotlights or other bright lights and light-reflecting objects.
6. To prevent damage, do not drop the camera or subject it to strong shock or vibration

Product Overview

FEATURES

• 4K UHD 1/1.7” Progressive Scan CMOS sensor capable of 4K (4096 x 2160) captures sharp and vivid images even under very low light conditions.
• Powered by a back-illuminated pixel technology.
• Advanced digital imaging processor provides vivid and detailed images by utilizing Dynamic Range, Auto White Balance, and Noise Reduction.
• Superb motion-compensated temporal noise reduction filter for motion video without blurring.
• OSD control breakout cable with two audio inputs and RS-485 for remote communication.
• Flawlessly relays multi-channel embedded audio via HDMI 2.0.
• Perfectly suited for broadcast, pro audio/video, and security.
• Versatile, compact, and rugged design.

OSD MENU

1. Move the Cursor Up/Down to Choose Menu
   To move from item to item in the menu, move the joystick to the Up/Down.

2. Change the Value
   To change the value of the selected item, move the joystick to the Left/Right.

3. Shift to the Sub Menu of the Chosen Menu
   To go into sub menu, press SEL key. The menu items with > always have its sub menu.

CONTROL

WB CONTROL

• AWB – Auto white balance mode will adjust white balance within
  3,000˜K ~ 8,000˜K temperature.

• ATW – Auto trace white mode will adjust white balance within
  1,900˜K ~ 11,000˜K temperature.

• ONE PUSH – One push mode is used if AWB or ATW cannot produce the proper
  white balance. Place a white paper in front of the camera when using the one push mode to self adapt.

• INDOOR – Indoor mode will adjust white balance to indoor lighting conditions.

• OUTDOOR – Outdoor mode will adjust white balance to outdoor lighting conditions.

• MANUAL – Manual mode will adjust white balance manually.

• BLUE – 0 ~ 100 ( Select blue gain within the range of 0 to 100 )

• RED – 0 ~ 100 ( Select Red gain within the range of 0 to 100 )

AE CONTROL

AUTO

Auto mode will adjust the exposure level automatically. Detailed fine-tuning options are available under this menu.

• AGC MAX: OFF, LOW, MIDDLE, HIGH, DMIN, DMID, DMAX
  “AGC MAX” sets the maximum gain value to control the video noise caused by Auto Gain Control.

• SENS UP: OFF, x2 ~ x10
  “SENS UP” mode controls the digital slow shutter to allow extra light into the camera and adjust the picture quality.

• AE BRIGHT: 0~20 – (Auto Exposure brightness level can be adjusted)

SHUT FIX

SHUT FIX mode provides more detailed shutter speed option. All other controls are tuned for the selected shutter speed

• SHUTTER: AUTO, 1/30 ~ 1/10,000 ( Shutter speed can be set )

• AGC MAX: OFF, LOW, MIDDLE, HIGH, DMIN, DMID, DMAX
  “AGC MAX” sets the maximum gain value to control the video noise caused by Auto Gain Control.

• SENS UP: 0~20
  “SENS UP” mode controls the digital slow shutter to allow extra light into the camera and adjust the picture quality.

• AE BRIGHT: 0~10
  Auto Exposure brightness level can be adjusted

AGC FIX

AGC FIX mode provides more detailed gain option. All other controls are tuned for the selected gain value.

• AGC : AUTO, 0dB ~ 27dB ( Gain level can be set )

• AGC MAX: OFF, LOW, MIDDLE, HIGH, DMIN, DMID, DMAX
  “AGC MAX” sets the maximum gain value to control the video noise caused by Auto Gain Control.

• AE BRIGHT: 0~10
  Auto Exposure brightness level can be adjusted

MANUAL

MANUAL mode provides more detailed fin tuning options.

• SHUTTER: AUTO, 1/30 ~ 1/10,000 ( Shutter speed can be set )

• AGC : 0dB ~ 27dB ( Gain level can be set )

• SENS UP : OFF, x2 ~ x10
  “SENS UP” mode controls the digital slow shutter to allow extra light into the camera and adjust the picture quality.

• LENS MODE : INDOOR, OUTDOOR, MANUAL
  Lens setting will be optimized for the selected environment. ( DC Iris lens only )

• FLK CONTROL : AUTO, ON, OFF
  “FLK CONTROL” mode provides a proper image sensor frequency to match the power frequency in order to minimize video flicker

DAY & NIGHT

Adjust color or B&W setting from this menu.

• MODE: DAY(COLOR), NIGHT(B&W) Set camera to either color mode or B&W mode.
• NIGHT COLOR: ON, OFF
  When “NIGHT COLOR” is turned ON, camera stays on color mode even “NIGHT(B&W)” is selected from the MODE.

AUDIO

• MODE: OFF, LINE, MIC
  Select the proper audio mode from this menu.

• AUDIO LEVEL : -12dB ~ 48dB
  The audio level can be manually adjusted from this menu.

• MIC ATTENUATOR : ON, OFF
  Audio input attenuation can be controlled from this menu to minimize the audio noise level.

• AGC LIMIT: -0dB ~ 58dB
  Audio gain level can be adjusted from this menu when MIC attenuation is enabled.

• SAMPLE BITS : 16, 20, 24, 32 ( Audio sample bit rate can be adjusted from this menu )

IMAGE CONTROL

• CONTRAST : 0 ~ 20 ( Contrast level can be adjusted )

• BRIGHTNESS : 0 ~ 20 ( Brightness level can be adjusted )

• SATURATION : 0 ~ 20 ( Saturation level can be adjusted )

• HUE : 0 ~ 20 ( Hue level can be adjusted )

• EDGE ENHANCE : 0 ~ 20 ( Image sharpness level can be adjusted )

• AUTO SATURATE : OFF, LOW, MIDDLE, HIGH
  Decrease saturation automatically when noisy scene is detected.

• AUTO EDGE : ON, OFF Decrease edge enhancement (sharpness) automatically when noisy scene is detected.
  Camera image control can be adjusted from EFFECT menu.

• BLACK WHITE LV: -64 ~ 64 ( Gamma level can be adjusted )

• GAMMA CORRECT: DEFAULT, 0.4 ~ 1.0 ( Gamma level can be adjusted )

• DNR: Camera noise level can be adjusted from this menu

• DNR MODE : OFF, 2D, 3D, 2D+3D
  Digital noise reduction can be applied from this menu.

• DNR LEVEL : AUTO, LOW, MIDDLE, HIGH
  Noise reduction level can be adjusted from this menu.

• DNR APERTURE : 0 ~ 4 ( Motion artifacts tightness can be adjusted ).

SPECIAL

Camera special functions can be adjusted from SPECIAL menu

• D ZOOM: ON, OFF
  Digital Zoom and PIP function can be enabled from this menu.

• ZOOM CONTROL: RATIO, POSITION, RETURN
  Adjust the digital zoom ratio and position. Use LEFT / RIGHT button to adjust the ratio, then press select. USE LEFT / RIGHT/ UP / DOWN button to adjust the image position, then press select. Press select to exit.

• DEFOG: ON, OFF, AUTO
  The “DEFOG” menu improves foggy image.

• STRENGTH : 0 ~ 16
  Change defog strength.

• THRESHOLD : 0 ~ 3
  The threshold value sets the minimum sensitivity value for automatic defog control. Higher value makes defog-on control reluctant.

• AUTO LEVEL: LOW, MID, HIGH
  Auto level value sets maximum strength value for automatic defog control. Higher value makes defog effect to be stronger

• BINNING: OFF, ON
  Binning can be turned ON or OFF.

• DEFECT PIXEL: OFF, ON, ON (FIXED), STATIC
  The defective Pixel Correction feature can be operated. It is turned ON by default and will run both dynamic and static DPC functions.

• DISPLAY FUNCTION :
  Adjust image display features from this menu.

• FREEZE : OFF, ON
  Image freeze can be turned ON or OFF.

• PICTURE STYLE : OFF, STANDARD, VIVID, CLEAR, VIVID CLEAR, NEUTRAL
  Different types of picture style can be applied.

PRIVACY

PRIVACY MASK an be setup from this menu

• MODE: ON, OFF
  Enable “PRIVACY ZONE” ON or OFF.

• TYPE: SQUARE, POLYGON
  Select privacy zone shape.

• MASK NO: MASK1 ~ MASK8
  Select the privacy zone mask number.

• DISPLAY: ON, OFF
  Turn ON or OFF the selected privacy mask zone.

• COLOR: WHITE, GREEN, BLUE, RED, CYAN, MAGENTA, YELLOW,
  GRAY-1 ~ 6, MOSAIC, BLACK. ( Select privacy zone mask color )

• POLY SELECT : L- TOPP, L- BOTTOM, R- TOP, R-BOTTOM
  Change the shape of the polygon by selecting the corner of the polygon.

• POSITION-X & POSITION-Y
  Change the size of the selected corner from “POLY SELECT” menu.

• SIZE-X & SIZE-Y
  Change the size of the privacy square.

• DEFAULT
  Set privacy zone to default value.

SETUP

Camera setup can be adjusted from this menu.

• CAM TITLE: OFF, ON
  The camera title can be turned ON or OFF.

• COMMUNICATION: VISCA communication control can be adjusted

• CAM ID : 0 ~ 7 ( Camera ID can be setup )

• ID DISPLAY: OFF, ON ( Camera ID can be setup )

• BAUDRATE : 2400, 4800, 9600, 19200, 38400 ( Camera baudrate can be set )
  SYSTEM INFO: ON, OFF, AUTO ( Camera information can be found under this menu ) OUTPUT FORMAT: ON, OFF, AUTO ( Camera resolution and frame rate can be set )
  Supported formats are:

  • 1080p by default
  • 4K2160P – 60 /59.94
  • 50 /30 / 29.97 / 25 / 24
  • 1080P – 60 / 59.94
  • 50 30/ 29.97 / 25 / 24
  • 1080I – 60 / 59.94 / 50
  • 720P – 60 / 59.94 / 50

RESET

• MODE: FACTORY, USER
  The camera will reset to factory default or user-saved value.

• RESET :
  Reset the camera to the selected mode.

• SAVE AS USER :
  Save the user-desired setting from the menu. ( Mode must be set to User )

SPECIFICATION

VIDEO

• Image Sensor 1/7” inch Progressive CMOS
• Sensor Size Diagonal 9.93mm(17:9)
• Effective Pixels Horizontal: 4096, Vertical: 2160
• Pixel Size 1.85 μm x 1.85 μm
• Resolution 4096 x 2160, 3840 x 2160, 1920 x 1080, 1280 x 720
• Resolution/Rate 4K (4096 X 2160) 60/59.94/50/30/29.97/25/24
  • 3840p 60/59.94/50/30/29.97/25/24p
  • 1080p 60/59.94/50/30/29.97/25p/24p
  • 1080i 60/59.94/50i
  • 720 60/59.94/50p
• Output HDMI 2.0
• Color Space 4:2:2 (YCbCr) 10bit

LENS

Lens C/CS Mount (with 4K 3.6mm – 11mm vari-focal lens)

AUDIO INPUT

• Input 3.5mm TRS Stereo
• Mic-in & Line in over I/O Cable
• Sample Rate 16/24/32 Bits

PHYSICAL

• Camera Control RS-485, OSD Button
• Operation Temp 15°F – 120°F
• Dimension 51mm x 51mm x 102mm / 2.01” x 2.01” x 4.01”
• Weight 384g / 0.84lbs
• Power 12VDC (+9 – +15VDC)

QUESTIONS

• Visit us:
  • www.aidaimaging.com/support
• E-mail us:
  • support@aidaimaging.com
• Give us a Call:
  • Toll Free: 844.631.8367 | Tel: 909.333.7421
  • Operating Hours: Mon-Fri | 8:00am – 5:00pm PST

Disposal of Old Appliances

1. When this crossed-out wheel bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC.
2. All electrical and electronic products should be disposed of separately form the municipal waste stream in accordance to laws designated by the government or the local authorities.
3. The correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health.
4. For more detailed information about disposal of your old appliance, please contact your city office, waste disposal service or the shop where you purchased the product.

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful inter reference in which case the user will be required
to correct the interference at his own expense.

References

• Support Center - AIDA Imaging
• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>