sp tools SP81490 Adjustable Beam Flashlight User Manual
- June 6, 2024
- SP tools
Table of Contents
SP81490 Adjustable Beam Flashlight
User Manual
SP81490
LED ADJUSTABLE BEAM FLASHLIGHT RECHARGEABLE
RETAIN THESE INSTRUCTIONS AND ATTACH RECEIPT TO MANUAL FOR FUTURE
REFERENCE
NOTE: Proof of purchase must be retained by the customer as it will be
required in the event of a claim under warranty.
AFTER-SALES SUPPORT:WWW.SPTOOLS.COM
AUSTRALIA: Visit the website’s contact page to get in touch with your
local service department.
INTERNATIONAL: Use the county selector to get in touch with your service
department in your country or region.
IMPORTANT
ALL PERSONS WHO ARE TO USE THIS EQUIPMENT MUST THOROUGHLY READ AND UNDERSTAND
THIS INSTRUCTION MANUAL PRIOR TO OPERATION.
INTRODUCTION
Scope of Delivery:
- Rechargeable 12V Led Flashlight
- 12V Car Adapter
- User Manual
Features
- Long-life high-intensity 1W Samsung light-emitting diodes
- Impact-resistant Polymer case
- Swiveling magnetic pocket clip
- Portable work light or penlight
- Rechargeable lithium-ion Battery
- USB charging system
Technical Specifications
- Bulb: Samsung 1W LED
- Led Flashlight: 130Lumen
- Dimensions: Length 104.5mm, Width 31mm
- Weight:1 0 0 g
- Battery Voltage: 3.7v (Lithium Ion)
- Charging Input voltage: 12V DC
- Charging Time: 2Hour
- Working Environment: Dry, Non-Flammable, less than 40
- Maximum Operating Temperature: 40°C
Intended Use
This device is intended for light commercial, private and domestic use in dry, non-hazardous environments.
Operating Instructions
- POWER BUTTON. ON/OFF
- Can be charged in the vehicle
Cleaning and Maintenance
- Keep your torch dry, clean, and free from oil, water, and grease.
- Use a mild detergent on a clean cloth to clean the outside of the tool, when necessary.
- Store in a cool location, (high temp will reduce battery life).
Disposal & Recycling Information
When the tool reaches its end of life, take it to a collection point
designated by local authorities for E-waste. The separate collection and
recycling of your product at the time of disposal will help conserve natural
resources and ensure that it is recycled in a manner that protects human
health and the environment.
LIMITED WARRANTY
This Limited Warranty applies only to new products* distributed by SP Tools
Pty Ltd (“SP Tools”). It is a condition of this Limited Warranty Policy that
the purchaser read the owner’s manual for the product and only use the product
to the extent or for the purposes stated therein. The purchaser must also
ensure that all servicing requirements are completed as listed in the owner’s
manual (said servicing is at the owner’s expense). We recommend that all
servicing is completed by an authorized service agent and that records of said
servicing are retained by the purchaser as proof in the event of a warranty
claim.
Whilst the owner’s manual, packaging, and/or other documentation supplied with
SP Tools’ products may provide details in respect of a Limited Warranty, the
terms set out herein supersede these matters, and this Limited Warranty
applies in their place. This warranty is no less advantageous than otherwise
described in such other documentation.
SP Tools agrees, subject to the terms and conditions specified below, to
repair or replace at SP Tools’ cost, the product purchased by you when the
product does not perform in accordance with its specifications during the
limited warranty period, due to any fault in manufacturing, materials and/or
workmanship. SP Tools is not liable to repair or replace products that the
purchaser uses in a manner that is inconsistent with the owner’s manual or in
the circumstances set out in paragraphs 1.1 1.7 below. The benefits to the
purchaser under this warranty are in addition to other rights and remedies
under the Competition and Consumer Act 2010 (Cth). The limited warranty
period, within which a defect in the product must appear, commences from the
date of purchase and ceases on the expiration of the specified term below.
THE LIMITED WARRANTY PERIOD
SP Speciality Tools 12 Months
THE PURCHASER’s ATTENTION IS DRAWN TO THE FOLLOWING
To the extent permitted by law and subject to this Limited Warranty, and as
part of the terms of the sale of the equipment or part thereof: SP Tools shall
not be liable for any form of loss, damage, cost, injury, or harm of any kind
(whether direct, indirect, special or consequential) howsoever arising from
the use or supply of the equipment to the purchaser.
EXCLUSIONS TO LIMITED WARRANTY POLICY
This Limited Warranty will not apply where the equipment or any part thereof:
1.1 Fails due to an accident (including liquid spillage), abuse, misuse,
neglect or normal wear and tear;
1.2 Has been used in a manner other than for which it was originally designed;
1.3 Has been tampered with or is otherwise than as supplied by SP Tools;
1.4 Where any damage, malfunction or another failure of the equipment or any
part thereof resulted directly or indirectly from unauthorized persons,
adjusting or failing to adjust any part requiring normal maintenance and
service (examples include adjustment of tappets, air filter maintenance,
lubrication, and tightening of screws nuts and bolts); 1.5 Malfunctions due to
the use of defective or incompatible accessories;
1.6 Is damaged by lightning or thunderstorm activity; or
1.7 Has been transported to a country where no authorized Service Agents
exist.
CLAIMING WARRANTY
This Limited Warranty may be claimed in the following manner:
2.1 In order to make a claim under this Limited Warranty, the purchaser must
deliver the equipment or any part thereof to an SP Tools authorized repair
agent and pay all costs of transportation and all costs incidental to making a
claim under this Limited Warranty. The purchaser must first contact SP Tools
(contact details described above) and request the delivery address of an SP
Tools authorized repair agent.
2.2 The purchaser must deliver to the repair agent written reasons why the
purchaser considers that the purchaser has a claim under this Limited Warranty
and must provide all necessary details, including
- The place, date, and from whom the unit or part was purchased.
- The unit or part involved, Model, and Serial Number.
- The defect, malfunction, or failure in respect of which the claim is being made.
- Proof of service of the unit or part (if applicable)
- Proof of purchase in respect of the unit or part.
2.3 If the Limited Warranty claim is valid, the repair agent will carry out
repairs and return the product at no charge to the purchaser. These repairs
are limited to the Limited Warranty fault identified and as such will not
include any other faults due to misuse, abuse, failure to maintain, fair wear
and tear or the replacement of serviceable items such as oil, spark plugs, air
filters, fuel, etc.
Our goods come with guarantees that cannot be excluded under Consumer Law. You
are entitled to a replacement or refund for a major failure and for
compensation for any other reasonably foreseeable loss or damage. You are also
entitled to have the goods repaired or replaced if the goods fail to be of
acceptable quality and the failure does not amount to a major failure.
Note: Units which are failing to perform in accordance with
specifications due to non-warrantable causes will be subject to freight,
repair, and or quote charge
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>