V-TAC VT-740 Pole Lamp Instruction Manual
- June 3, 2024
- V TAC
Table of Contents
V-TAC VT-740 Pole Lamp Instruction Manual
TECHNICAL DATA
| MODEL | VT-740 |
|---|---|
| MAX WATTS | 3x60W Per Holder or Total |
| IP RATING | IP44 |
| HOLDER | E27 [Bulb not included] |
| BODY TYPE | ALUMINIUM |
| NPUT POWER | AC:220-240V, 50Hz |
| DIMENSION | 530x530x1990mm |
INTRODUCTION & WARRANTY
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installation and keep this manual handy for future reference. If you have any another query, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at the best.The warranty is valid for 3 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. The products are suitable for 10-12 Hours Daily operation. Usage of product for 24 Hours a day would void the warranty. This product is warranted for manufacturing defects only.!
! WARNING
- PLEASE MAKE SURE TO TURN OFF THE POWER BEFORE STARTING THE INSTALLATION. ·
- PROPER GROUNDING SHOULD BE ENSURED THROUGHOUT THE INSTALLATION.
- PLEASE READ THROUGH ALL FOLLOWING INSTRUCTIONS BEFORE INSTALLING THE UNIT. ·
- USER SHOULD PREPARE NECESSARY ACCESSORIES AND SPARE PARTS (NOT PROVIDED). ·
- INSTALLATION MUST BE PERFORMED BY A QUALIFIED ELECTRICIAN.
This marking indicates that this product should not be disposed of with other household wastes.
Caution, risk of electric shock.
INSTALLATION DIAGRAM
INSTALLATION INSTRUCTION
-
Turn off the power.
-
Drill a hole in the ground (as per the distance showed on pic 4).
-
Dig the screws into the hole.
-
Fixing the bracket onto the ground.
-
Open the lamp and install the bulb in the lamp. Close the lamp and tighten the screws.
-
Put the wire into the pole, and assemble the pole together with the base.
-
Connect supply leads with terminal brown (L) to brown, blue (N) to blue and greenish-yellow ( ) to
greenish-yellow. -
Tighten the nuts to fix down the lamp.
-
Turn on the Power.
Customer Support
In case of any query/issue with the product, please reach out to us at:
support@v-tac.eu
For More products range, inquiry please contact our distributor or nearest
dealers.
V-TAC EUROPE LTD. Bulgaria, Plovdiv 4000, bul.L.Karavelow 9B